Plasma Arc Welder
Conn Selmer, Inc
Eastlake, OH
Expired: April 08, 2024
Applications are no longer accepted.
- Full-Time
Job Type
Full-time
Description
Job Title: Plasma Arc Welder
GENERAL RESPONSIBILITIES:
- Responsible for safely producing the plasma arc welded radial seams on bells for brass wind musical instruments (from a variety of materials) and producing any of the related components.
- Setting-up and maintaining any and all of the related equipment.
- Cleaning / degreasing component parts and finished bells.
- Materials, supplies, components, and instruments must be moved from previous or moved to subsequent production operations.
- Work procedures for these operations must follow standardized methods in a clearly prescribed sequence.
ESSENTIAL FUNCTIONS:
- Required to move, lift, and maneuver all raw materials (up to 100 lbs.), tooling (up to 75 lbs.), work in process, and finished parts to assigned locations (either by hand or by mechanical means) safely and carefully. Required to form, spin, stamp, trim, or otherwise prepare raw materials for subsequent production operations.
- Required to prepare bell flairs (from a variety of materials) or retrieve completed bell flairs from the automated spinning operation, and "face-off" bell flairs to an appropriate size and shape for subsequent plasma arc welding.
- Required to "stamp" bell tails to an appropriate size and shape for subsequent plasma arc welding. Required to produce well-matched parts that will produce structurally sound plasma arc welded radial seams.
- Produce component parts for brazed radial seams. Required to pickle (using an overhead crane), degrease (from an elevated platform), or otherwise clean component parts for subsequent plasma arc welding or other production operations.
- Required to plasma arc weld radial bell seams from component parts for brass wind musical instruments. Required to set-up, adjust, operate, and service all equipment related to plasma arc welding. Required to remove, replace, and safely store gas tanks, to grind electrodes, and to otherwise make all necessary adjustments to equipment.
- Required to pickle (using an overhead crane), degrease (from an elevated platform), or otherwise clean finished parts following plasma arc welding.
- Required to maintain an appropriate, clean, and safe work environment.
- This description reflects management's assignment of essential functions, it does not proscribe or restrict the tasks that may be assigned.
PRE-DETERMINED QUALIFICATIONS:
- Regular attendance.
- Manufacturing Process Aptitude.
- Requires a high degree of skill and dexterity.
- Ability to make sound judgment based on consistent and objective measures.
PHYSICAL REQUIREMENTS:
- Position requires extended periods of standing.
- Proper use of Personal Protective Equipment.
- Required to properly dispose of or recycle any scrap material generated by any assigned production operation, and are required to maintain an appropriate, clean, and safe work environment.
- Exposure to manufacturing environment, including dust, noise, and vibration.
Requirements
PHYSICAL REQUIREMENTS:
- Position requires extended periods of standing.
- Proper use of Personal Protective Equipment.
- Required to properly dispose of or recycle any scrap material generated by any assigned production operation, and are required to maintain an appropriate, clean, and safe work environment.
- Exposure to manufacturing environment, including dust, noise, and vibration.
Address
Conn Selmer, Inc
34199 CURTIS BLVD
Eastlake, OH
44095
USA
Industry
Construction
Get fresh Plasma Arc Welder jobs daily straight to your inbox!
You Already Have an Account
We're sending an email you can use to verify and access your account.
If you know your password, you can go to the sign in page.