*14251812-Pipefitters - 2Q24

Pipefitters - Newport News, VA
12- month contract.
Pay $17.00-$27.00 BOE
Must be US Citizen

Sorry, No C2C or third party resumes.

Description / Experience:
Three or more years as a marine, commercial nuclear, or petro/chem First Class Pipefitter.

Required Experience / Qualifications:
1.Able to read and interpret ship piping drawings.
2. Experienced fitting carbon steel, CRES, and copper nickel piping.
3. Ability to end prep piping by hand and/or with Wach or Portsmouth Machine.
4. Knowledge in installing pipe hangers.
5. Ability to read a ruler using inches and tenths.
6. Ability to prep and fit-up backing rings.
7. Ability to clean cut/break pipe with a grinder.
8. Ability to hand prep V bevels.
9. Experience in fabrication of various details and assemblies from drawings.
10. Ability to bend pipe from template and in the use of a hand bender.
11. Ability to fit welded sockets.
12. Ability to fit brazed joints with/without insert ring.

Special consideration for applicants with following documented qualifications:

1.Confined space trained in accordance with OSHA Standards 29 CFR 1915 Subpart B.
2. Hazard communication trained in accordance with OSHA Standard 29CFR 1915.1200 (1910.1200) (h) - (1) through (3) (iv).
3. Respirator trained and qualified. A Respirator Medical Clearance Examination as required by a Physician. The Respirator Training and Fit Testing will meet the requirements of Standard 29CFR1910.134 and each individual shall be trained in a negative-pressure type respirator, MSA COMFO CLASSIC (with MSA approved vapors and dust filter cartridges to be provided for them respirators by the LLPC). Our client requires the use of a MSA COMFO CLASSIC Respirator only (approximate weight 12 oz.). Daily use of respirator may occur.
4. Fall Protection/4-D Body Harness-Vertical & Horizontal Lifelines-Beam Clamp trained and qualified in accordance with the following OSHA Regulations; 29CFR1915.159, 29CFR1915.71 (j) (3), 29CFR1915.73 (d), and 29CFR1915.77 (c). Our client highly recommends the vest-donning type of body harness instead of the step-into-type body harness, with D-Ring in the back. Individuals must be trained (which includes having donned the body harness and demonstrated practical use of the vertical & horizontal lifelines and beam clamp) with the same type fall protection equipment that they are expected to wear on our client's premises or on off-site work locations. Body Harness and Vertical & Horizontal Lifelines and Beam Clamps Systems shall comply with the requirements of ANSI Z359.1. NNS may require 60' Self Retracting Lifelines that are Leading Edge compliant and a Quick Grab. Our client uses the FallTech DuraTech Edge SRL-LE. NNS uses the Miller Rope Grab. This rope grab must fit 5/16" carbon steel wire rope.
5. Personal Protective Equipment (PPE*) training in accordance with OSHA Standards 29CFR 1915 Subpart I and Hearing Conversation 29CFT 1910.95 (i) (j) (k) (l).
6. Non-prescription and prescription safety glasses must meet the requirements of ANSI Z87, with permanently attached side shields.
7. Hard Hats must be WHITE in color with the Leased Labor Provider Company's name and the individual's last name on the front of the hard hat.
8. Hearing protection must be of the muff type (banded or mounted) and must have been trained on their use. Our client uses the Bilsom Leightning (model L1N).
9. Foot protection must be 8" safety boots or leather safety shoes w/spats.
10. Coveralls must be flame resistant with long sleeves.
11. Audiometric testing which documents proof of individual worker's hearing function. 12. Snood.
13. Flashlight.
14. Knee pads (good industrial quality type).
15. Jackson face shield with bracket and clear lens.
16. Leather gloves and cut resistant gloves.
17. Lufkin 966 Two-Way red-ended 6ft x 5/8" ruler or similar.

Required Safety Training / Qualifications:
TASC Technical Services will provide employees who have completed the following safety training and /or medical clearance and provide documentation (copy of training, records, medical clearances, etc.) on Company Letterhead to our client's Environmental, Health and Safety Department (O27) for review and approval prior to assignment of employees to work.

* PPE training means general requirements, eye and face protection, head protection, foot protection, hand and body protection, hearing protection and body harness-personal fall arrest systems (PFAS) and position device systems.

#zr