CNC Operator

Position Title: CNC Operator Monday-Friday 6am-5pm

Location: Ennis, TX

Reporting to: Machine Shop Supervisor

Essential Functions

The function of the CNC Operator is to manufacture quality finished products in accordance with instructions of the work order.

Role and Responsibilities

Specific duties include but are not limited to the following:

1. Report to work on time and clock in/out at the beginning and end of the shift.

2. Report to the Machine Shop Supervisor to be assigned to a workstation and receive written work instructions.

3. Follow all company policies and regulations concerning conduct and safety.

4. Perform and document any necessary machine maintenance prior to running equipment.

5. Verify material to Work Order prior to maching to ensure that correct

6. Check all precision measurement instruments for current calibration status and report any outdated or damaged equipment to the Manager.

7. Verify dial calipers against micrometers at the start of each shift, prior to use.

8. Do not leave the machine while in operating cycle.

9. Document all pertinent machine information before switching programs.

10. Verify holders and boring bars against the program setup sheets to ensure that all tooling is properly located and positioned.

11. Keep all documentation in a clean legible condition.

12. Have all program changes approved by the Machine shop Supervisor and ensure that a 1st Article Inspection is documented by a QC Specialists before proceeding.

13. Report immediately any lathe malfunction to the Machine shop Supervisor.

14. Proceed with care when removing work piece from machine to avoid damage to new connections.

15. Identify any work completed by you by marking your assigned identification number on the machined part, using a yellow paint marker.

16. Paint white and repair as soon as possible any product which is out of specification.

17.Report any questionable machined dimension, or problems with material, to the QC Specialist and/or Manager.

18. Not earlier than 20 minutes before shift ends, clean and wipe down the machine. Remove shavings from the pan and put shavings into the shaving bin. Sweep the floor in your work area.

19. Sign-off on Work Order, Router form, and any other documentation as required by Benoit SOP.

20. Adhere to all company policies.

Candidate’s minimum skills and experiences.

Qualifications:

· Must be a High School graduate

· Must pass a Company physical

· Must have the general knowledge of CNC equipment and precision measuring equipment (scales, micrometers, dial calipers, etc.)

· Must be able to communicate effectively

· Must be able to read and comprehend prints and drawings

· Must complete additional training deemed necessary by the department manager

· Must be capable of passing a standard Color Blindness Test

· Must read and sign-off to required Benoit SOPs

Benefits Benoit Offers

·          Competitive salary commensurate with the job title

·          Personal Time Off (PTO) eg Vacation, Sick leave etc.

·          Health, Dental, Vision, Short Term and Long-Term Disability, Life Insurance, Supp. Life Insurance, and Aflac coverages

·          401K plan.

·          Incentive (Bonus) program

·          Parental Leave Program

·          Company sponsored Advanced Educational and Skills Program

·          Student Loan Contribution Program

·          Community Outreach Program.

Equal Opportunity Employer, Veterans, and Individuals with Disabilities, E-Verify

Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time.