ZipRecruiter

Log In

1

Temporary Associate Failure Analysis Engineer Jobs

Texas Instruments

Failure Analysis Engineer

Dallas, TX · On-site

Texas Instruments (TI) is seeking a full-time Failure Analysis Engineer in Dallas, Texas to be responsible for technical functions in support of engineering activities such as characterization design ...

Foxconn

Failure Analysis Engineer

Houston, TX · On-site

NPI build defective boards debugging, analysis and repair. * Work with product engineering team to figure out production issue (Including SMT and PCBA assembly). * Come out failure analysis report ...

Hyve Solutions

Failure Analysis Engineer

Fremont, CA · On-site

Position Summary We are seeking a highly analytical Failure Analysis Engineer to support the investigation of hardware failures in rack systems, server platforms, and data center infrastructure ...

Intellectt Inc

Failure Analysis Engineer

Newark, DE · On-site

Failure Analysis Engineer Location: Newark, DE Duration: 12 months Note: Here client is not looking for a QE; they need someone from Electrical and Mechanical troubleshooting experience ...

Flex

Failure Analysis Engineer

Salt Lake City, UT · On-site

Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a Failure Analysis Engineer located in Salt Lake City, UT. In this role, the ...

Solidigm

Failure Analysis Engineer

Rancho Cordova, CA · On-site

$121K - $194K/yr

This Senior Failure Analysis Engineer will debug Solid State Drive (SSD) failures discovered during internal validation as well as field failures from our customers. They will need to work on variety ...

Apple

Silicon Failure Analysis Engineer

Austin, TX · On-site

We have an opportunity for a forward-thinking and especially motivated Silicon Failure Analysis Engineer! As a member of our dynamic group, you will have the rare and great opportunity to work on ...

Power Integrations

Failure Analysis Engineer

San Jose, CA · On-site

$76K - $121K/yr

Description Silicon level Failure Analysis Engineer will perform device level failure analysis to support RMA and customer issues. Responsibilities: • Performing fault isolation and defect analysis ...

SolarEdge

Failure Analysis Engineer

Milpitas, CA · On-site

We are looking for a Failure Analysis Engineer who loves digging into tough hardware problems, building creative test setups, and turning complex failures into clear technical answers. This is not a ...

next page

Showing results 1-20

All JobsTemporary Associate Failure Analysis Engineer Jobs

Temporary Associate Failure Analysis Engineer information

See salary details

$41.5K

$82.6K

$132K

How much do temporary associate failure analysis engineer jobs pay per year?

As of Jul 5, 2026, the average yearly pay for temporary associate failure analysis engineer in the United States is $82,636.00, according to ZipRecruiter salary data. Most workers in this role earn between $65,500.00 and $95,000.00 per year, depending on experience, location, and employer.

What are the key skills and qualifications needed to thrive as a Temporary Associate Failure Analysis Engineer, and why are they important?

To thrive as a Temporary Associate Failure Analysis Engineer, you need a background in engineering or materials science, strong analytical skills, and familiarity with failure analysis principles. Experience with laboratory equipment such as scanning electron microscopes (SEM), X-ray analysis tools, and relevant software like CAD or data analysis platforms is typically required. Attention to detail, problem-solving abilities, and effective communication skills help you excel in diagnosing issues and collaborating with cross-functional teams. These competencies are crucial for accurately identifying component failures and contributing to product improvements in a timely manner.

What are Temporary Associate Failure Analysis Engineers?

Temporary Associate Failure Analysis Engineers are entry-level professionals hired for a limited period to assist in identifying, analyzing, and resolving failures in products or systems, often in manufacturing or engineering environments. They work under the supervision of senior engineers and use various analytical tools and techniques to determine root causes of failures and support corrective actions. Their role is essential in maintaining product quality and reliability while gaining hands-on experience in failure analysis processes. These positions are often contract-based and can serve as a stepping stone to permanent roles in engineering.

What types of projects or cases does a Temporary Associate Failure Analysis Engineer typically work on, and how is their workload managed within the team?

As a Temporary Associate Failure Analysis Engineer, you'll usually be assigned to evaluate and investigate component or product failures, often working on a variety of cases with different levels of complexity. Your workload is often project-based and can fluctuate depending on urgent production issues or ongoing development cycles. You’ll collaborate closely with senior engineers, quality assurance teams, and manufacturing staff to gather data and provide detailed reports on root causes. Effective communication and the ability to manage multiple cases simultaneously are key, as your findings will directly inform design improvements and corrective actions.

What is the difference between Temporary Associate Failure Analysis Engineer vs Temporary Associate Quality Control Inspector?

AspectTemporary Associate Failure Analysis EngineerTemporary Associate Quality Control Inspector
Primary RoleInvestigates product failures, analyzes root causes, and recommends improvementsInspects products for defects, ensures quality standards, and performs testing
Required SkillsFailure analysis, technical troubleshooting, data analysisVisual inspection, testing procedures, quality standards knowledge
Work EnvironmentLaboratories, manufacturing plants, R&D settingsManufacturing lines, quality assurance departments
Common CertificationsFailure analysis certifications, technical degreesQuality inspection certifications, technical training

While both roles support manufacturing and quality, the Failure Analysis Engineer focuses on diagnosing and solving product failures, whereas the Quality Control Inspector emphasizes inspecting and maintaining product quality during production.

More about Temporary Associate Failure Analysis Engineer jobs
What cities are hiring for Temporary Associate Failure Analysis Engineer jobs? Cities with the most Temporary Associate Failure Analysis Engineer job openings:
What states have the most Temporary Associate Failure Analysis Engineer jobs? States with the most job openings for Temporary Associate Failure Analysis Engineer jobs include:
What job categories do people searching Temporary Associate Failure Analysis Engineer jobs look for? The top searched job categories for Temporary Associate Failure Analysis Engineer jobs are:
Temporary Associate Failure Analysis Engineer jobs near you
Infographic showing various Temporary Associate Failure Analysis Engineer job openings in the United States as of June 2026, with employment types broken down into 64% Full Time, 34% Part Time, and 2% Contract. Highlights an 99% Physical, and 1% Remote job distribution, with an average salary of $82,636 per year, or $39.7 per hour.
Failure Analysis Engineer (Electromechanical)

Failure Analysis Engineer (Electromechanical)

Intellectt INC

Newark, DE • On-site

Contractor

Posted 16 days ago

Be an early applicant

Job description

Hello,

I hope you're doing well.

My name is Mahalakshmi, and I’m reaching out from Intellectt Inc. regarding an exciting contract opportunity for a Failure Analysis Engineer (Electromechanical) based in Newark, DE (Onsite), with one of our prestigious clients.
I would love to connect and discuss this opportunity in more detail. Please feel free to share your updated resume at mahalakshmi.n@intellectt.com  OR +1 (732) 737 8381
Job Title: Failure Analysis Engineer (Electromechanical)
Location: Newark, DE (Onsite)

Position Summary

Seeking a hands-on Failure Analysis Engineer to investigate product failures and field issues for electromechanical medical devices. The role focuses on troubleshooting, root cause analysis, and driving corrective actions to improve product reliability.

Key Responsibilities

  • Investigate product failures and field issues.
  • Perform electrical and mechanical troubleshooting.
  • Conduct root cause analysis (RCA) and recommend corrective actions.
  • Support CAPA activities and continuous improvement.
  • Collaborate with R&D, Manufacturing, Quality, and Service teams.

Required Qualifications

  • Bachelor's degree in Electrical, Mechanical, Biomedical, Mechatronics, or related Engineering field.
  • 3+ years of experience in Failure Analysis, Reliability, Quality, or Manufacturing Engineering.
  • Strong electromechanical troubleshooting and RCA skills.
  • Ability to read electrical schematics and technical drawings.

Keywords: Failure Analysis, RCA, Electromechanical Troubleshooting, CAPA, FMEA, Reliability Engineering, Medical Devices, Quality Engineering.
Thanks & Regards,
Mahalakshmi
Junior Recruiter
Intellectt Inc 
mahalakshmi.n@intellectt.com
Direct: +1 (732) 737 8381