ZipRecruiter

Log In

1

Manager Dimensional Inspector Jobs in Austin, TX

Firefly Aerospace

Quality Inspector IV (NDT)

TX · On-site

Manage inspection service vendor relationships and performance Receiving Quality Inspection: * Perform receiving quality inspections for incoming GSE purchases * Verify dimensional accuracy ...

Noveon

Inspection Technician

San Marcos, TX · On-site

... dimensional and quality requirements while supporting process optimization and equipment ... Oversee, manage, and execute the calibration of automated inspection machinery and manual precision ...

NOV, Inc.

Quality Inspector

Cedar Park, TX

... dimensional, and functional nature, making necessary critical observations, tests, or competing ... Typically reports to a supervisor/manager While performing the duties of this job, the employee may ...

NOV, Inc.

Quality Inspector

Cedar Park, TX · On-site

... dimensional, and functional nature, making necessary critical observations, tests, or competing ... Typically reports to a supervisor/manager While performing the duties of this job, the employee may ...

NOV

Quality Inspector

Cedar Park, TX

... dimensional, and functional nature, making necessary critical observations, tests, or competing ... Typically reports to a supervisor/manager While performing the duties of this job, the employee may ...

NOV

Quality Inspector-Cedar Park,Texas

Briarcliff, TX

... dimensional, and functional nature, making necessary critical observations, tests, or competing ... Typically reports to a supervisor/manager While performing the duties of this job, the employee may ...

NTG Staffing

Saw Machinist

Cedar Park, TX

$16 - $19/hr

Ability to manage multiple machines simultaneously in a production setting. * Experience performing dimensional inspections using precision measuring tools and handheld metrology equipment.

iWorkforce Solutions LP

CNC Saw Operator

Cedar Park, TX · On-site

$23 - $26/hr

Perform dimensional inspections using calipers, tape measures, and other measuring tools. * Load ... Experience managing multiple machines simultaneously. * Experience with overhead cranes and ...

Allen Control Systems

Quality Engineer

Austin, TX · On-site

$71K - $92K/yr

Develop and maintain quality management systems (QMS), including procedures for inspections ... Conduct visual, dimensional, and functional inspections of incoming machined parts using advanced ...

Allen Control Systems

Quality Engineer

Austin, TX · On-site

$71K - $92K/yr

Develop and maintain quality management systems (QMS), including procedures for inspections ... Conduct visual, dimensional, and functional inspections of incoming machined parts using advanced ...

next page

Showing results 1-20

All JobsManager Dimensional Inspector JobsManager Dimensional Inspector Jobs in Austin, TX

Manager Dimensional Inspector information

See Austin, TX salary details

$24.3K

$54.5K

$98.1K

How much do manager dimensional inspector jobs pay per year?

As of Jun 26, 2026, the average yearly pay for manager dimensional inspector in Austin, TX is $54,456.00, according to ZipRecruiter salary data. Most workers in this role earn between $38,200.00 and $62,900.00 per year, depending on experience, location, and employer.

What does a dimensional inspector do?

A dimensional inspector examines manufactured parts and products to ensure they meet specified measurements and tolerances using tools like calipers, micrometers, and coordinate measuring machines. They verify product quality, document inspection results, and may require knowledge of engineering drawings and quality standards such as ISO or ASQ certifications.

What are the key skills and qualifications needed to thrive as a Manager Dimensional Inspector, and why are they important?

To thrive as a Manager Dimensional Inspector, you need expertise in precision measurement, quality control, and a background in manufacturing or engineering, often supported by relevant certifications like ASQ CMI or GD&T training. Familiarity with coordinate measuring machines (CMM), laser scanners, and statistical process control (SPC) software is typically required. Strong leadership, attention to detail, and effective communication are vital soft skills for managing teams and ensuring quality standards. These skills ensure the accurate verification of components, compliance with specifications, and efficient team performance in quality-driven industries.

What type of inspectors make the most money?

Senior or specialized inspectors, such as quality control managers or lead dimensional inspectors with advanced certifications and extensive experience, tend to earn the highest salaries. In industries like aerospace, automotive, or manufacturing, inspectors with expertise in non-destructive testing or advanced measurement tools often command higher pay.

What skills do you need to be a dimensional inspector?

A dimensional inspector needs strong attention to detail, proficiency with measurement tools such as calipers and micrometers, and knowledge of quality standards like ISO or AS9100. Good analytical skills, manual dexterity, and the ability to read technical drawings are also important for accurately verifying part dimensions.

What is the difference between Manager Dimensional Inspector vs Dimensional Inspector?

AspectManager Dimensional InspectorDimensional Inspector
CertificationsOften requires certifications like CMM programming or quality managementTypically requires basic inspection certifications or none
Work EnvironmentSupervises inspection teams in manufacturing or aerospace settingsPerforms hands-on measurements in production or quality control labs
ResponsibilitiesOversees inspection processes, manages staff, ensures standardsConducts dimensional measurements, reports discrepancies

The Manager Dimensional Inspector focuses on supervising inspection teams and managing quality processes, while the Dimensional Inspector performs the actual measurements and inspections. Both roles are essential in quality assurance but differ mainly in scope and responsibility.

What are some common challenges faced by a Manager Dimensional Inspector, and how can they be addressed?

A Manager Dimensional Inspector often faces challenges such as maintaining high accuracy under tight deadlines, ensuring compliance with evolving quality standards, and effectively leading a team of inspectors with varying experience levels. Addressing these challenges involves implementing robust training programs, leveraging advanced metrology tools, and fostering a culture of continuous improvement. Regular communication with engineering, production, and quality assurance teams is also key to resolving measurement discrepancies and streamlining inspection processes.

Is a QC inspector job stressful?

A Manager Dimensional Inspector role can involve stress due to strict quality standards, attention to detail, and meeting deadlines. The job requires precision, often involving the use of measurement tools and adherence to safety protocols, which can contribute to workload pressure.

What are Manager Dimensional Inspectors?

Manager Dimensional Inspectors are professionals who oversee the dimensional inspection process in manufacturing or engineering environments. They are responsible for managing teams that measure and verify the physical dimensions of products or components to ensure they meet specified tolerances and quality standards. Their duties include supervising inspectors, implementing inspection protocols, maintaining measurement equipment, and ensuring compliance with industry regulations. Additionally, they often liaise with quality assurance teams and production managers to resolve any dimensional discrepancies and improve inspection processes.
What are popular job titles related to Manager Dimensional Inspector jobs in Austin, TX? For Manager Dimensional Inspector jobs in Austin, TX, the most frequently searched job titles are:
What job categories do people searching Manager Dimensional Inspector jobs in Austin, TX look for? The top searched job categories for Manager Dimensional Inspector jobs in Austin, TX are:
What cities near Austin, TX are hiring for Manager Dimensional Inspector jobs? Cities near Austin, TX with the most Manager Dimensional Inspector job openings:
Manager Dimensional Inspector jobs near you

Quality Inspector IV (NDT)

Firefly Aerospace

TX • On-site

Part-time

Medical, Dental, Vision, PTO

Posted 12 days ago

Firefly Aerospace rating

8.4

Company rating: 8.4 out of 10

Based on 9 frontline employees who took The Breakroom Quiz

27th of 60 rated aerospace companies

Job description

ABOUT FIREFLY AEROSPACE
As an end-to-end responsive space transportation company, Firefly Aerospace is on a mission to enable our world to launch, land, and operate in space - anywhere, anytime. Our launch vehicles, lunar landers, and orbital vehicles provide government and commercial customers with full mission services from low Earth orbit to the surface of the Moon and beyond. Headquartered in north Austin, Texas, Firefly is looking for passionate, hardworking innovators to join our team and help fuel our successful trajectory into space.
About the Role
Firefly Aerospace is seeking an experienced Senior Quality Inspector with welding inspection expertise to join our inspection team. This role serves as an embedded shop inspector, ensuring the quality and integrity of fabricated and welded hardware throughout the manufacturing process. The ideal candidate will be a Certified Welding Inspector (CWI) with multiple NDT certifications who can generate and manage quality documentation, coordinate inspection services, communicate with engineers, technicians, and welders, and support the many unique demands for the custom hardware designed and built by the Firefly GSE Team.
Key Responsibilities:
Welding & Fabrication Inspection:
  • Inspect weldments for dimensional accuracy and quality requirements throughout the weld/fabrication process
  • Perform in-process and final inspections of welded assemblies, pressure vessels, structural components, and fabricated hardware
  • Verify welder qualifications and welding procedure specifications (WPS) compliance
  • Monitor weld quality and adherence to approved welding procedures
  • Conduct pre-weld, in-process, and post-weld inspections per applicable codes and standards
  • Review and approve weld travelers and production documentation

Non-Destructive Testing (NDT):
  • Perform NDT inspections using multiple methods:
  • Magnetic Particle Testing (MT)
  • Radiographic Testing (RT)
  • Visual Testing (VT)
  • Liquid Penetrant Testing (PT)
  • Interpret NDT results and make accept/reject decisions based on applicable codes and acceptance criteria
  • Prepare detailed NDT inspection reports documenting findings and disposition
  • Ensure proper NDT technique selection for various materials, geometries, and weld types

Quality Documentation Management:
  • Create and maintain weld maps showing weld locations, numbers, and inspection status
  • Generate comprehensive NDT inspection reports for all tested components
  • Document and certify hydroproof/hydrostatic test results and reports
  • Collect, review, and maintain Material Test Reports (MTRs) and Certificates of Compliance (C of C)
  • Manage traceability documentation for materials, welders, and inspection activities
  • Prepare inspection data packages for customer deliverables and project closeout
  • Maintain accurate records in quality management systems

Inspection Coordination & Facilitation:
  • Identify requirements for specialized inspection services (internal or external)
  • Coordinate and schedule external inspection services including:
    • Radiographic Testing (RT) from external vendors
    • Laser tracking and dimensional verification services
    • Coordinate Measuring Machine (CMM) inspection services
    • Other specialized NDT or metrology services• Interface with third-party inspection agencies and vendors
  • Review and approve external inspection reports for completeness and accuracy
  • Manage inspection service vendor relationships and performance

Receiving Quality Inspection:
  • Perform receiving quality inspections for incoming GSE purchases
  • Verify dimensional accuracy, workmanship quality, and conformance to purchase order specifications
  • Inspect purchased components including
    • Structural steel and welded assemblies
    • Hardware, fittings, and off-the-shelf components
    • Umbilical systems and cable assemblies
    • Electrical control panels and instrumentation
    • Pressure vessels and fluid systems
    • :Review supplier-provided documentation (MTRs, C of Cs, test reports, certifications)
  • Generate nonconformance reports (NCRs) for rejected or discrepant materials
  • Maintain receiving inspection records and supplier quality metrics

Standards & Compliance:
  • Ensure compliance with AS9100D quality management system requirements
  • Apply AWS D1.1 (Structural Welding Code - Steel), AWS D1.2 (Aluminum), and other applicable welding codes
  • Follow ASME Section VIII (Pressure Vessels) and Section IX (Welding Qualifications) as applicable
  • Apply NASA standards (NASA-STD-5005, NASA-STD-5009) for GSE design verification
  • Verify conformance to engineering drawings, specifications, and work instructions
  • Support contamination control requirements for flight-critical interfaces

Collaboration & Support:
  • Work closely with fabrication, welding, engineering, and GSE operations teams
  • Collaborate with Manufacturing Engineers and GSE Leadership to improve fabrication processes and product quality
  • Communicate inspection findings and quality concerns clearly and promptly
  • Participate in root cause analysis and corrective action activities for weld-related defects
  • Support continuous improvement initiatives and lessons learned
  • Provide technical guidance to welders and fabricators on quality requirements
  • Assist with supplier quality audits and assessments

Required Qualifications
  • High School Diploma or GED; Associate's degree in Welding Technology, Quality Assurance, or related field preferred
  • Certified Welding Inspector (CWI) certification from AWS (American Welding Society) - Required
  • Level 2 or Level 3 NDT certifications (per NAS 410 or SNT-TC-1A) in the following methods:
    • Magnetic Particle Testing (MT) - Required
    • Radiographic Testing (RT) - Required
    • Visual Testing (VT) - Required
    • Liquid Penetrant Testing (PT) - Required
  • Minimum 5 years of quality inspection experience in welding, fabrication, or aerospace manufacturing
  • Strong knowledge of welding codes and standards (AWS D1.1, AWS D1.2, ASME Section VIII & IX)
  • Ability to read and interpret complex engineering drawings, weld symbols, and technical specifications
  • Proficiency with precision measurement instruments and welding inspection gauges
  • Strong understanding of GD&T (Geometric Dimensioning and Tolerancing)
  • Working knowledge of AS9100 quality management systems
  • Experience with pressure vessel inspection and hydrostatic testing
  • Excellent attention to detail and ability to identify weld defects and discontinuities
  • Strong written and verbal communication skills for technical reports and coordination
  • Proficiency with Microsoft Office (Word, Excel) and quality management software
  • Ability to make independent accept/reject decisions based on code requirements
  • U.S. Person status required (U.S. Citizen, Lawful Permanent Resident, Refugee, or Asylee) due to ITAR/EAR requirements

Preferred Qualifications
  • Associate's or Bachelor's degree in Welding Engineering, Manufacturing Engineering, or related technical field
  • Experience with AS9102 First Article Inspection (FAI) procedures
  • Familiarity with NASA standards for ground support equipment (NASA-STD-5005, NASA-STD-5009)
  • Experience inspecting aerospace pressure vessels, fluid systems, and structural weldments
  • Knowledge of aerospace electrical standards (IPC-A-610, IPC/WHMA-A-620)
  • Experience with stainless steel, aluminum, titanium, and exotic alloy welding inspection
  • Experience with orbital welding and automated welding systems
  • Proficiency with quality management software (e.g., ETQ, TrackWise, SAP QM)
  • Experience coordinating laser tracking, CMM inspection, and advanced metrology services
  • Previous experience in launch vehicle or spacecraft GSE manufacturing
  • Knowledge of cryogenic systems and pressure testing procedures
  • Experience managing vendor quality relationships and external inspection services
  • Understanding of functional safety standards (IEC 61508, MIL-STD requirements)

Physical Requirements & Work Environment
  • Ability to work in fabrication shops, manufacturing floors, and outdoor environments
  • Standing, walking, and bending for extended periods during inspections
  • Ability to lift and carry up to 50 lbs (inspection equipment, weld samples)
  • Manual dexterity for operating precision measurement tools and NDT equipment
  • Good visual acuity (correctable to 20/20) and color vision for weld inspection and VT
  • Ability to work in confined spaces and at heights on elevated platforms/scaffolding
  • Exposure to welding operations, sparks, fumes, and industrial environments
  • Use of appropriate PPE (personal protective equipment) including welding shade, respiratory protection, and hearing protection as required
  • Flexibility to support production schedules, which may include overtime or weekend work to meet project deadlines
  • Occasional travel (up to 15%) to launch sites, supplier facilities, or external inspection facilities

Key Competencies
  • Technical Expertise: Deep knowledge of welding processes, codes, and inspection techniques
  • Attention to Detail: Ability to identify weld defects, discontinuities, and deviations from specifications
  • Independence & Integrity: Commitment to maintaining quality standards even under schedule pressure
  • Communication: Clear documentation, technical report writing, and effective coordination with multiple stakeholders
  • Problem-Solving: Analytical thinking to identify root causes of weld defects and support corrective actions
  • Organization: Ability to manage multiple inspection activities, documentation packages, and vendor coordination simultaneously
  • Teamwork: Collaborative approach with fabrication teams while maintaining inspection independence
  • Adaptability: Flexibility to inspect diverse GSE systems and coordinate various inspection services

Firefly offers outstanding benefits for our employees, including generous health, dental and vision plans with low plan deductibles, parental leave, educational reimbursement, short term disability, relocation and flexible PTO options.
To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Firefly Aerospace, Inc. is an Equal Opportunity Employer; employment with Firefly is governed based on merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Apply