ZipRecruiter

Log In

2

Full Time Millwright Apprentice Jobs in Oregon (NOW HIRING)

Pacific Coast Producers

Maintenance Mechanic

Salem, OR · On-site

$32.91 - $35.11/hr

Pay Rate : $32.91 - $35.11 per hour. Full time/ 40 hours per week with some weekend and overtime ... millwright or industrial maintenance apprenticeship strongly preferred. * Minimum 5+ years of ...

All JobsMillwright Apprentice JobsFull Time Millwright Apprentice JobsFull Time Millwright Apprentice Jobs in Oregon

Full Time Millwright Apprentice information

What are some typical challenges Full Time Millwright Apprentices face during their apprenticeship, and how can they overcome them?

Full Time Millwright Apprentices often encounter challenges such as adapting to physically demanding tasks, learning to use a wide variety of precision tools, and understanding complex machinery systems. Time management is crucial when balancing hands-on work with classroom learning. Building strong communication skills and asking questions when unsure can help apprentices receive valuable guidance from experienced journeypersons. Staying proactive about safety protocols and continuously practicing new skills will help apprentices gain confidence and succeed in their role.

What are the key skills and qualifications needed to thrive as a Full Time Millwright Apprentice, and why are they important?

To thrive as a Full Time Millwright Apprentice, you need a solid understanding of mechanical systems, basic math, and blueprint reading, typically supported by a high school diploma or GED and enrollment in a recognized apprenticeship program. Familiarity with hand and power tools, precision measuring instruments, and safety protocols is essential, and some employers may require safety certifications like OSHA. Strong problem-solving, attention to detail, and teamwork are valuable soft skills for this role. These skills and qualities are crucial for ensuring safe, efficient installation, maintenance, and repair of industrial machinery in demanding environments.

What is the difference between Full Time Millwright Apprentice vs Full Time Industrial Mechanic Apprentice?

AspectFull Time Millwright ApprenticeFull Time Industrial Mechanic Apprentice
CredentialsTypically requires high school diploma, technical training, and apprenticeship programsSimilar requirements: high school diploma, technical training, and apprenticeships
Work EnvironmentFactories, manufacturing plants, construction sites involving machinery installation and maintenanceFactories, industrial plants, maintenance facilities with machinery repair and troubleshooting
Industry UsageCommonly used in manufacturing, construction, and industrial sectorsUsed in manufacturing, industrial maintenance, and production facilities

Both roles require technical training and apprenticeships, often overlapping in work environments and industry usage. The main difference lies in specific job focus: Millwright Apprentices primarily work on machinery installation and alignment, while Industrial Mechanic Apprentices focus on machinery repair and maintenance. Understanding these distinctions helps in choosing the right career path within industrial trades.

What is a Full Time Millwright Apprentice?

A Full Time Millwright Apprentice is an individual who is learning the trade of millwrighting through a combination of classroom instruction and hands-on work experience, typically under the supervision of a journeyman millwright. Millwrights are skilled tradespeople who install, maintain, repair, and troubleshoot industrial machinery and equipment in factories, power plants, and construction sites. As an apprentice, you work full time while gradually acquiring the technical skills and knowledge required to become a certified millwright. Apprenticeships usually last several years and involve both paid on-the-job training and formal education.
What are popular job titles related to Full Time Millwright Apprentice jobs in Oregon? For Full Time Millwright Apprentice jobs in Oregon, the most frequently searched job titles are:
What job categories do people searching Full Time Millwright Apprentice jobs in Oregon look for? The top searched job categories for Full Time Millwright Apprentice jobs in Oregon are:
What cities in Oregon are hiring for Full Time Millwright Apprentice jobs? Cities in Oregon with the most Full Time Millwright Apprentice job openings:
Full Time Millwright Apprentice jobs near you
Maintenance Mechanic

Maintenance Mechanic

Pacific Coast Producers

Salem, OR • On-site

$32.91 - $35.11/hr

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Posted yesterday

Job description

Pacific Coast Producers, a growing agricultural cooperative with food production facilities across the West Coast, is seeking a talented and experienced Maintenance Mechanic M1 and/or M2 to join our team at our Production Facility in Salem, OR. PCP is investing in its people and advancing a culture of service, where each employee can do their best to make affordable, high-quality food for customers across North America. Our Salem facility produces maraschino cherries and other cherry products in various styles, colors, and flavors and employs between 70-100 employees.
Pay Rate: $32.91 - $35.11 per hour. Full time/ 40 hours per week with some weekend and overtime hours required when needed. This position is part of a seniority based Collective Bargaining Unit (CBA) and requires work on various shifts. Must be available to work swing shift (3pm to midnight) if necessary.

Join our legacy of talented people working together to provide the highest level of customer service. PCP employees receive terrific benefit plans such as affordable medical, dental, and vision insurance. Retirement savings plans, including a defined-benefit pension plan is also provided to eligible employees.

The Maintenance Mechanic performs the following duties:

  • Install, maintain, and repair production machinery, conveyors, pumps, process piping, mixers, boilers, compressors, blowers, wastewater systems, and facility infrastructure.
  • Perform precision alignment, leveling, and balancing of equipment.
  • Inspect, troubleshoot, and repair boilers, steam systems, compressed air systems, blowers, and wastewater treatment systems.
  • Perform forklift and material-handling equipment maintenance, repair, and troubleshooting (engines, hydraulics, electrical, and safety systems).
  • Safely drive and operate forklifts, aerial equipment, and other vehicles required to complete maintenance or facilities work.
  • Carry out general facilities maintenance and upkeep, including HVAC, lighting, doors, and building systems.
  • Fabricate, weld, and machine components for equipment repair, modification, or installation.
  • Diagnose and repair mechanical, pneumatic, hydraulic, and basic electrical systems.
  • Dismantle and reassemble equipment for major overhauls and rebuilds.
  • Interpret blueprints, P&IDs, and mechanical drawings to support installation and troubleshooting.
  • Support production changeovers, sanitation schedules, and setups in line with GMP and HACCP requirements.
  • Assist with installation and commissioning of new process, utility, and facility systems.
  • Use CMMS to log work orders, inspections, and maintenance history.
  • Train and mentor junior technicians in technical skills and safe work practices.
  • Follow all lockout/tagout, boiler safety, confined space, hot work, forklift operation, aerial lift safety, and OSHA requirements.


Requirements

  • High school diploma or GED required; completion of a millwright or industrial maintenance apprenticeship strongly preferred.
  • Minimum 5+ years of maintenance and millwright experience, preferably in food manufacturing.
  • Proven experience maintaining and repairing forklifts and material-handling equipment.
  • Certification or demonstrated ability to safely operate forklifts, aerial lifts, and other vehicles.
  • Strong background with boilers, steam systems, blowers, air compressors, wastewater systems, and facilities upkeep.
  • Advanced skills in mechanical repair, precision alignment, rigging, and fabrication.
  • Proficiency in welding (MIG, TIG, stick), cutting, and machining.
  • Knowledge of pneumatics, hydraulics, bearings, pumps, gearboxes, and power transmission systems.
  • Familiarity with electrical troubleshooting (motors, VFDs, sensors, PLC-controlled equipment).
  • Experience with stainless steel fabrication and food-grade materials.
  • Strong knowledge of OSHA, GMP, boiler codes, forklift safety, and food safety compliance.
  • Physical ability to lift 100 lbs. and work in varied environments (wet, humid, hot, cold).


Why Join PCP?

Become part of a team where your work truly matters. For over 50 years, our farmer-owned company has led the industry through innovation and a shared commitment to excellence. As an employee represented by a Collective Bargaining Agreement (CBA), you’ll be the backbone of our operations, ensuring everything runs safely, efficiently, and reliably every day.


At PCP, we believe in providing more than just a job; we offer long-term stability and a benefits package you can truly count on:

  • Competitive hourly pay and overtime opportunities.
  • Comprehensive medical, dental, and vision coverage.
  • A defined-benefit pension plan for long-term retirement security.
  • Paid time off including holidays, vacation, sick leave, and bereavement (per the CBA contract).
  • Employee Assistance Program and life insurance.
  • Reliable year-round work with a company that has been farmer-owned for more than 50 years.


Sponsorship: This role is not eligible for current or future visa sponsorship.


About PCP Summary

Established in 1971, Pacific Coast Producers is a cooperative owned by over 165 family farmers that grow and deliver various produce, including tomatoes, peaches, pears, grapes, cherries, and more, to production facilities in California and Oregon for processing and packaging. With over 3,000 dedicated employees, PCP strives to produce the finest quality products for customers across all channels of trade, including grocery retailers and foodservice distributors throughout the United States and Canada.

Our facility is located in Salem, OR which is a thriving city in the heart of Willamette Valley, offering a vibrant downtown, strong sense of community, and access to outdoor recreation. As the capital of Oregon, it's only a 45-minute drive from Portland, making it a great location for those seeking urban amenities and a smaller community feel.

AA/EEO Policy Statement

Pacific Coast Producers is an affirmative action and equal opportunity employer. No employee or applicant will be discriminated against in any condition of employment because of race, color, national origin, sex, religion, age, disability, veteran status, or any other status protected by law.

Apply