ZipRecruiter

Log In

1

Temp Injection Molding Process Engineer Jobs in Raleigh, NC

Corning

Maintenance Support Associate

Durham, NC · On-site

$15.50 - $21.25/hr

Performs various process improvements of machines and equipment. Participates in troubleshooting ... Maintain clean tooling for extruders, injection molding equipment, assembly equipment, and other ...

Corning

Maintenance Support Associate

Durham, NC

$15.50 - $21.25/hr

Performs various process improvements of machines and equipment. Participates in troubleshooting ... Maintain clean tooling for extruders, injection molding equipment, assembly equipment, and other ...

Sunrise Systems Inc

Be Seen First

Mechanical Enginee2_26-02524

Durham, NC · On-site

$75 - $81/hr

... injection molded and related systems and assemblies. * Product development considerations for ... Mechanical Engineering is responsible for designing and developing components, mechanisms, systems ...

New

MLS Technologies

Senior Mechanical Engineer

Apex, NC · On-site

$80K - $105.70K/yr

... processes, including creating fixtures, molds, and prototype subassemblies Familiarity with Design for Manufacturing (DFM), Assembly (DFA), and Test (DFT) practices Preferred Qualifications:

Recruiting Engine (MLS)

Senior Mechanical Engineer

Apex, NC · On-site

$80K - $105.70K/yr

... processes, including creating fixtures, molds, and prototype subassemblies Familiarity with Design for Manufacturing (DFM), Assembly (DFA), and Test (DFT) practices Preferred Qualifications:

MLS Technologies

Senior Mechanical Engineer

Apex, NC · On-site

$80K - $105.70K/yr

... processes, including creating fixtures, molds, and prototype subassemblies Familiarity with Design for Manufacturing (DFM), Assembly (DFA), and Test (DFT) practices Preferred Qualifications:

Lubrizol Corporation

Market Segment Manager

Raleigh, NC · On-site +1

$115K - $170K/yr

... Gate and other processes from ideation to successful product launch. * Utilize outstanding ... Strong technical acumen in thermoplastic elastomers, specialty polymers, injection molding ...

Lubrizol Corporation

Market Segment Manager

Raleigh, NC · On-site +1

$115K - $170K/yr

... Gate and other processes from ideation to successful product launch. * Utilize outstanding ... Strong technical acumen in thermoplastic elastomers, specialty polymers, injection molding ...

Amgen

Engineer I - 2 Shift

Holly Springs, NC · On-site

Manufacturing, Quality, Process Development, Maintenance, network partners) to ensure reliable ... injection, etc. * Experience with equipment and facility control systems operation, logic, and ...

RELX

Consulting/Principal Security Engineer

Raleigh, NC

$104.90K - $174.70K/yr

Get hands-on with the OWASP, NIST, and the latest research on prompt injection, model supply chain ... We are committed to providing a fair and accessible hiring process. If you have a disability or ...

next page

Showing results 1-20

People also search for

All JobsInjection Molding Process Engineer JobsTemp Injection Molding Process Engineer JobsTemp Injection Molding Process Engineer Jobs in Raleigh, NC

Temp Injection Molding Process Engineer information

See Raleigh, NC salary details

$48.1K

$89.4K

$138.5K

How much do temp injection molding process engineer jobs pay per year?

As of May 30, 2026, the average yearly pay for temp injection molding process engineer in Raleigh, NC is $89,449.00, according to ZipRecruiter salary data. Most workers in this role earn between $72,400.00 and $100,100.00 per year, depending on experience, location, and employer.

What is the difference between Temp Injection Molding Process Engineer vs Injection Molding Technician?

AspectTemp Injection Molding Process EngineerInjection Molding Technician
ResponsibilitiesDesigns, optimizes, and oversees injection molding processes to improve quality and efficiency.Operates and maintains injection molding machines, ensuring production runs smoothly.
Required SkillsProcess engineering, troubleshooting, and process optimization skills.Machine operation, troubleshooting, and basic maintenance skills.
CredentialsBachelor's degree in engineering or related field; certifications in process improvement are common.Technical diploma or certification in manufacturing or machine operation.
Work EnvironmentDesign labs, manufacturing plants, and process development settings.Production floors and machine operation areas.

The Temp Injection Molding Process Engineer focuses on process design and optimization, while the Injection Molding Technician handles daily machine operation and maintenance. Both roles are essential in manufacturing, but they differ in scope, responsibilities, and required qualifications.

What are popular job titles related to Temp Injection Molding Process Engineer jobs in Raleigh, NC? For Temp Injection Molding Process Engineer jobs in Raleigh, NC, the most frequently searched job titles are:
What job categories do people searching Temp Injection Molding Process Engineer jobs in Raleigh, NC look for? The top searched job categories for Temp Injection Molding Process Engineer jobs in Raleigh, NC are:
Temp Injection Molding Process Engineer jobs near you
Maintenance Support Associate

Maintenance Support Associate

Corning

Durham, NC • On-site

$15.50 - $21.25/hr

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Posted 13 days ago

Corning rating

8.2

Company rating: 8.2 out of 10

Based on 122 frontline employees who took The Breakroom Quiz

80th of 511 rated manufacturers

Job description

Requisition Number: 74792
The company built on breakthroughs.
Join us.
Corning is one of the world's leading innovators in glass, ceramic, and materials science. From the depths of the ocean to the farthest reaches of space, our technologies push the boundaries of what's possible.
How do we do this? With our people. They break through limitations and expectations - not once in a career, but every day. They help move our company, and the world, forward.
At Corning, there are endless possibilities for making an impact. You can help connect the unconnected, drive the future of automobiles, transform at-home entertainment, and ensure the delivery of lifesaving medicines. And so much more.
Come break through with us.
Corning's businesses are ever-evolving to best serve our customers, industries, and consumers. Today, we accelerate and transform life sciences, mobile consumer electronics, optical communications, display, automotive, and solar markets. We are changing the world with:
  • Trusted products that accelerate drug discovery, development, and delivery to save lives
  • Damage-resistant cover glass to enhance the devices that keep us connected
  • Optical fiber, wireless technologies, and connectivity solutions to carry information and ideas at the speed of light
  • Precision glass for advanced displays to deliver richer experiences
  • Auto glass and ceramics to drive cleaner, safer, and smarter transportation
  • Solar polysilicon, wafers, and innovative photovoltaic modules, enabling low-cost solar energy solutions

THE PRIMARY PURPOSE OF THIS POSITION IS:
Performs routine and emergency maintenance on high-speed automated manufacturing and production support equipment. Performs various process improvements of machines and equipment. Participates in troubleshooting, process improvement, and new equipment installation that vary in complexity.
This position includes significant duties such as:
  • Coordinates maintenance resources in support of operational priorities. This includes partnering with Supervisors, Team Leads, and Manufacturing Leads.
  • Performs routine changeovers including, but not limited to, lot changes, end of arm tooling changes, and mold changes.
  • Perform proper startup and shutdown procedures on equipment and verification of equipment status.
  • Assist operations team with routine line issues, resets, and restarts.
  • Completes required preventive maintenance at defined intervals. Routinely assesses the suitability of such intervals and scope covered and revises when necessary.
  • Trains and mentors other associates within maintenance and operations.
  • Monitor output quality and quantity; troubleshoot as needed to make necessary machine and parameter adjustments where applicable; and alleviate jams.
  • Troubleshoots major equipment breakdowns and performs mechanical, pneumatic, and electrical maintenance whenever required to ensure uninterrupted customer supply.
  • Utilize all resources including, but not limited to, troubleshooting guides, manuals, standard operating procedures, work order logs to diagnose and resolve equipment issues.
  • Provides technical support to engineering team on equipment installations and upgrades.
  • Supports and assists other technicians with troubleshooting, conducting preventative maintenance (PM), and repairs to equipment as needed.
  • Works with Quality and Engineering to document repairs/changes made to equipment.
  • Supports capital equipment projects [as the subject matter expert (SME) for maintenance] including specification, design input, testing, etc.
  • Performs troubleshooting and maintenance on electrical systems up to 480 VAC.
  • Works with hand tools and/or power tools while troubleshooting, conducting preventative maintenance (PM), or repairing equipment. Demonstrates safe techniques and proper use of all tools.
  • Uses inventory management systems to obtain replacement parts for corrective/preventative maintenance, and proactive replacement efforts. Identifies and rectifies any discrepancies in inventory and future order needs.
  • Document all troubleshooting and maintenance activities in appropriate Computer Maintenance Management Systems (CMMS).
  • Completes production records/forms recording relevant data onto forms or via electronic data entry in Maximo or other systems. Ensures accuracy and good documentation practices per company and Good Manufacturing Practice (GMP) standards.
  • Maintain clean tooling for extruders, injection molding equipment, assembly equipment, and other manufacturing equipment.
  • Repairs, rebuilds, adjusts, inspects, and monitors production and/or facility related equipment and machinery.
  • Supports validations from a mechanical perspective.
  • Complies with safety systems and procedures such as Lock-Out/Tag-Out, NFPA-70 E Arc Flash, spills, and machine guarding at all times.
  • Responsible for hazardous waste removal.
  • Participates in Kaizen and Lean activities as necessary to drive continuous improvement initiatives.
  • Performs other duties as required to meet the needs of the department and company.

Working Conditions:
  • Exposure to industrial machinery, moving parts, electrical and other energy sources.
  • Personal Protective Equipment (PPE) required including, but not limited to, lab coats, hair/beard covers, gloves, ear protection, eye protection, safety shoes etc.
  • Exposure to fumes and chemicals such as cleaners, inks, and solvents.
  • Exposure to high frequency noise.
  • Frequently lifts and/or moves up to 25 pounds and up to 65 pounds rarely.
  • Adherence to plant safety requirements, OSHA and QSR/GMP/ISO guidelines as applicable.

Education:
  • Associates Degree, Technical Certificate program or equivalent experience.
  • NFPA 70E Arc Flash certification, required

Experience Required:
  • Minimum of 6 years' experience with equipment maintenance in an FDA compliant manufacturing environment.
  • Specific work experience required in use of Vision systems, electrical troubleshooting of circuits from low level signals up to 480 VAC, Allen-Bradley Programmable Logic Controllers (PLCs), and making modifications to Ladder Logic

The range for this position is $35.00 hourly rate - $38.25 hourly rate. Starting pay for the successful applicant is dependent on a variety of job-related factors, including but not limited to geographic location, market demands, experience, training, and education.
A job that shapes a life.
Corning offers you the total package.
Your well-being is our priority. Our compensation and benefits package supports your health and wellness, financial aspirations, and career from day one.
  • Company-wide bonuses and long-term incentives align with key business results and ensure you are rewarded when the company performs well. When Corning wins, we all win.
  • As part of our commitment to your financial well-being, we provide a 100% company-paid pension benefit with fixed contributions that grow throughout your career. Combined with matching contributions to your 401(k) savings plan, Corning's total contributions to your retirement accounts can reach between 7% and 12% of your pay, depending on your age and years of service.
  • Our health and well-being benefits include medical, dental, vision, paid parental leave, family building support, fitness, company-paid life insurance, disability, disease management programs, paid time off, and an Employee Assistance Program (EAP) to support you and your family.
  • Getting paid for our work is important, but feeling appreciated and recognized for those contributions motivates us much more. That's why Corning offers a recognition program to celebrate successes and reward colleagues who make exceptional contributions.

We prohibit discrimination on the basis of race, color, gender, age, religion, national origin, sexual orientation, gender identity or expression, disability, veteran status or any other legally protected status.
Corning is committed to providing equal employment opportunities and considers requests for reasonable accommodations in accordance with applicable laws. Individuals with disabilities or sincerely held religious beliefs may request reasonable accommodations to participate in the application or interview process, perform essential job functions, or access other benefits and privileges of employment. To submit a request for reasonable accommodation related to disability or religion, please contact us at accommodations@corning.com.

What Corning employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply