ZipRecruiter

Log In

2

Remote Mechanical Engineer Aviation Jobs (NOW HIRING)

Boutique Recruiting

Mechanical Engineer

Gurnee, IL · On-site +1

$110K - $120K/yr

Mechanical Engineer This position is a fully remote Mechanical Engineer responsible for designing and upgrading laser printing setups for customers in the food, beverage, pharmaceutical, and ...

Above Group

Remote Mechanical Engineer (ME)

Melbourne, FL · Remote

Mechanical Engineer (ME) The Position The Mechanical Engineer for Above Group shall contribute and ... Desire and ability to work remote. Local candidates will have the option to work in the office or ...

Apply Early

Belcan

(Remote)Mechanical Designer

$83K - $114K/yr

A remote Mechanical Designer job is currently available through Belcan supporting an existing full ... aerospace, aviation, or UAS systems is preferred, but not required Ability to take partial ...

Belcan

(Remote)Mechanical Designer

$83K - $114K/yr

A remote Mechanical Designer job is currently available through Belcan supporting an existing full ... aerospace, aviation, or UAS systems is preferred, but not required Ability to take partial ...

Belcan

(Remote)Mechanical Designer

$83K - $114K/yr

A remote Mechanical Designer job is currently available through Belcan supporting an existing full ... aerospace, aviation, or UAS systems is preferred, but not required Ability to take partial ...

MDS Engineering

Senior Mechanical Engineer

York, PA · On-site +1

$95K - $145K/yr

Experience with aviation, government, education, commercial, institutional, healthcare, laboratory ... mechanical engineering practice. www.MDSengineering.com/careers Flexible work from home options ...

Apply Early

next page

Showing results 1-20

All JobsRemote Mechanical Engineer Aviation Jobs

Remote Mechanical Engineer Aviation information

See salary details

$45.5K

$102.9K

$166.5K

How much do remote mechanical engineer aviation jobs pay per year?

As of Jul 3, 2026, the average yearly pay for remote mechanical engineer aviation in the United States is $102,878.00, according to ZipRecruiter salary data. Most workers in this role earn between $81,500.00 and $126,500.00 per year, depending on experience, location, and employer.

What is the difference between Remote Mechanical Engineer Aviation vs Remote Mechanical Engineer Aerospace?

AspectRemote Mechanical Engineer AviationRemote Mechanical Engineer Aerospace
Required CredentialsBachelor's in Mechanical Engineering, FAA certifications (if applicable)Bachelor's in Mechanical/Aerospace Engineering, FAA certifications (if applicable)
Work EnvironmentDesign and testing for aircraft, drones, and aviation systemsDesign and testing for spacecraft, satellites, and aerospace systems
Industry UsagePrimarily in commercial and private aviation sectorsPrimarily in space exploration and satellite industries

Both roles involve mechanical design and testing, but Aviation focuses on aircraft and related systems, while Aerospace emphasizes spacecraft and space technology. The skills and certifications overlap significantly, with industry-specific applications differentiating the roles.

More about Remote Mechanical Engineer Aviation jobs
What cities are hiring for Remote Mechanical Engineer Aviation jobs? Cities with the most Remote Mechanical Engineer Aviation job openings:
What are the most commonly searched types of Mechanical Engineer Aviation jobs? The most popular types of Mechanical Engineer Aviation jobs are:
What states have the most Remote Mechanical Engineer Aviation jobs? States with the most job openings for Remote Mechanical Engineer Aviation jobs include:
What job categories do people searching Remote Mechanical Engineer Aviation jobs look for? The top searched job categories for Remote Mechanical Engineer Aviation jobs are:
Remote Mechanical Engineer Aviation jobs near you
Infographic showing various Remote Mechanical Engineer Aviation job openings in the United States as of June 2026, with employment types broken down into 98% Full Time, 1% Part Time, and 1% Contract. Highlights an 37% Physical, 3% Hybrid, and 60% Remote job distribution, with an average salary of $102,878 per year, or $49.5 per hour.
Mechanical Engineer - Aviation & Federal (Atlanta)

Mechanical Engineer - Aviation & Federal (Atlanta)

Burns & McDonnell

Atlanta, GA • On-site, Remote

Full-time

Posted 19 days ago

Burns & McDonnell rating

8.6

Company rating: 8.6 out of 10

Based on 49 frontline employees who took The Breakroom Quiz

4th of 79 rated construction

Job description

Imagine having an ownership stake in the company where you work. Founded in 1898, Burns & McDonnell is an award-winning firm specializing in engineering, architecture, construction, environmental, and consulting services. Our global projects are driven by a singular mission: to make our clients successful. Locally, regionally, and nationally, we're recognized as a Best Place to Work. As a 100% employee-owned company, we've cultivated a culture where everyone is personally invested in project outcomes and client satisfaction. Our employee-owners embrace an ownership mindset, working diligently and intelligently to benefit our clients and enhance our communities. While we offer flexible work options, including 6 weeks of remote work, flexible daily schedules, and 9/80 work schedules, our commitment to success keeps our employee-owners engaged in the office. At Burns & McDonnell, hard work and entrepreneurial spirit lead to success for our clients, communities, and individual wealth. We truly are owners.
 
The Mechanical Engineer will work on project teams to create world class designs for new projects, alterations, and renovations on a variety of HVAC and plumbing projects primarily for aviation, government, and military facilities. The Mechanical Engineer will work with the project team throughout the design and construction process, developing HVAC and plumbing designs according to budget constraints, design factors, or client needs.
 
Essential functions include, but are not limited to the following:
  • Research and compile project related data as required by the project managers.
  • Applies strong knowledge of commonly used mechanical engineering/design concepts, principles, practices, codes, and procedures within the mechanical engineering services industry.
  • Design HVAC and plumbing components for project needs and requirements that are set forth by the project managers.
  • Design HVAC and plumbing systems for projects from the conceptual phase through design completion, covering various HVAC and plumbing systems: air-side/duct design, chilled and condenser water, heating hot water, steam, HVAC controls, domestic water, sanitary waste and vent and compressed gases.
  • Lead development of design documents and update drawings provided by senior engineers to verify corrections are made within Revit and other CAD related software.
  • Compiles information for client presentations, shop drawing review, and contract administration for design projects.
  • Demonstrates understanding of, and effectively applies, federal design standards such as the Unified Facilities Criteria (UFC) and Unified Facilities Guide Specifications (UFGS) in project planning and design.
  • Lead and perform HVAC load calculation and energy modeling calculations and life cycle cost analyses (LCCA) with IES-VE or similar software (Trane Trace 700, Trane Trace 3D Plus, etc).
  • Modify and review production drawings for a variety of projects primarily focusing on aviation, government, and military facilities but also including power plants, industrial, life science, and commercial facilities.
  • Performs field inspections, measurements or calculations for public and private clients.
  • Complies with all policies and standards.
  • Performs other duties as assigned.
  • Bachelor's Degree in Mechanical Engineering or related degree from an ABET-accredited program, and 3 years of mechanical engineering experience required.Plumbing and HVAC experience preferred. OR
  • Bachelor Degree in Mechanical or related Engineering Technology from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam and 3 years of mechanical engineering experience. Plumbing and HVAC experience preferred. OR
  • Master's Degree in Mechanical Engineering and 2 years of mechanical engineering experience required. Plumbing and HVAC experience preferred.
  • 4 years of Mechanical Engineering and Plumbing and HVAC experience preferred.
  • Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills.
  • Excellent written and verbal communication skills.
  • Proficient in standard engineering techniques and procedures.
  • Strong attention to detail, facilitation, team building, collaboration, organization, and problem-solving skills.
  • Strong knowledge in standard engineering techniques and procedures.
  • Strong operating knowledge of and experience using Revit is preferred. AutoCAD and MicroStation experience is a plus.
  • Strong operating knowledge of and experience with load calculations and energy modeling in IES-VE, Trane Trace 700, or Trane Trace 3D Plus is preferred. Other software such as Carrier HAP, Energy Pro, etc. may be considered.
  • Experience with AFT Fathom, Elite Ductsize, or Bently AutoPIPE is a plus.
  • Strong computer skills (e.g. Microsoft Office Suite) in writing of design reports, design calculations, and presentations.
  • Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.

  • Professional Engineer (PE) License is preferred, Engineer in Training (EIT) Certification may be considered.

    EEO/Disabled/Veterans
     

What Burns & McDonnell employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Burns & McDonnell logo

About Burns & McDonnell

Sourced by ZipRecruiter

Burns & McDonnell assists clients of all sizes and industries by providing extensive physical services ranging from assessments, integrated security solutions, and large security architecture designs. Services we typically provide include security and safety system design, threat, risk, and vulnerability assessments, security surveys, security master planning, compliance to federal security programs, independent validation and verification of integrated security system operations, management of installation and maintenance, and staff augmentation to develop and implement facility management and protection processes.

Industry

Civil engineering construction

Company size

10,000+ Employees

Headquarters location

Kansas City, MO, US

Year founded

1898

Social media

FacebookTwitter

View All Burns & McDonnell Jobs

Apply