ZipRecruiter

Log In

1

Hammer Steel Jobs (NOW HIRING)

ELLWOOD Groups

Forge/Hammer Operator

Navasota, TX · On-site

Work as part of a forge crew to heat, preform, forge, trim, inspect, and move steel parts. * Train ... Train to operate the forging hammer, carefully controlling hammer strikes to shape the part ...

ELLWOOD Group, Inc.

Forge/Hammer Operator

Navasota, TX · On-site

Work as part of a forge crew to heat, preform, forge, trim, inspect, and move steel parts. * Train ... Train to operate the forging hammer, carefully controlling hammer strikes to shape the part ...

Hutco Inc

Stick Welders

Houston, TX · On-site

$19 - $21/hr

Chipping Hammer * Steel Toe Boots * Long - Sleeve Shirt * Long Pants * Stinger/ Electrode Holder with Male Connector (SMAW) * Pliers / Cutters (FCAW) * Safety Glasses * Wire Brush ESSENTIAL JOB ...

Steel Service

STRUCTURAL STEEL FITTER

Jackson, MS · On-site

$17.75 - $22.50/hr

Hammer out bulges or bends in metal workpieces. * Dismantle metal assemblies or cut scrap metal ... Join parts such as beams and steel reinforcing rods in buildings, bridges, and highways, bolting ...

Steel Service Corporation

STRUCTURAL STEEL FITTER

Jackson, MS · On-site

$17.75 - $22.50/hr

Hammer out bulges or bends in metal workpieces. * Dismantle metal assemblies or cut scrap metal ... Join parts such as beams and steel reinforcing rods in buildings, bridges, and highways, bolting ...

previous pagenext page

Showing results 21-40

All JobsManufacturing JobsMachining JobsMetal Fabricator JobsHammer Steel Jobs

Hammer Steel information

See salary details

$14

$23

$34

How much do hammer steel jobs pay per hour?

As of Sep 1, 2026, the average hourly pay for hammer steel in the United States is $23.56, according to ZipRecruiter salary data. Most workers in this role earn between $19.71 and $26.68 per hour, depending on experience, location, and employer.

What is the difference between Hammer Steel vs Rebar Fabricator?

AspectHammer SteelRebar Fabricator
CertificationsOSHA safety training, industry-specific certificationsOSHA safety training, rebar fabrication certifications
Work EnvironmentConstruction sites, steel fabrication shopsRebar fabrication plants, construction sites
Employer & Industry UsageSteel fabrication, construction, infrastructure projectsRebar manufacturing, concrete reinforcement projects

Hammer Steel and Rebar Fabricator roles both involve steel work in construction settings. Hammer Steel typically focuses on steel erection and fabrication, while Rebar Fabricators specialize in cutting, bending, and assembling rebar for concrete reinforcement. Both roles require safety certifications and are integral to construction projects, but they differ in specific tasks and work environments.

More about Hammer Steel jobs

What cities are hiring for Hammer Steel jobs?

Cities with the most Hammer Steel job openings:

What states have the most Hammer Steel jobs?

States with the most job openings for Hammer Steel jobs include:

What job categories do people searching Hammer Steel jobs look for?

The top searched job categories for Hammer Steel jobs are:

Hammer Steel jobs near you
Infographic showing various Hammer Steel job openings in the United States as of August 2026, with employment types broken down into 1% As Needed, 90% Full Time, 4% Part Time, 1% Temporary, 2% Contract, and 2% Nights. Highlights an 97% Physical, 1% Hybrid, and 2% Remote job distribution, with an average salary of $49,006 per year, or $23.6 per hour.

Forge/Hammer Operator

Navasota, TX • On-site

ELLWOOD Groups
See more jobs at ELLWOOD Groupsexternal

Full-time

Medical, Dental, Vision, Retirement, PTO

Re-posted 21 hours ago

Job description

Join the Mission!
Mastery. Integrity. Craft.
At Ellwood, we believe metal is a pillar of human process. What makes it possible are the people behind it; people who don't just meet the highest standards but define them. And who always respect the stakes at hand.
Check out the links below to see what our day looks like - See what drives us.
https://www.youtube.com/watch?v=7yjgsLL6Qoo
https://www.ellwoodgroup.com/careers
Forge Operator - DG80 Complex/Hammer Shop
ELLWOOD Texas Forge Navasota is seeking safety-focused Forge Operators to join our forging operations in Navasota, Texas. Forge Operators work as part of a crew using industrial hammers, presses, furnaces, dies, tools, and material-handling equipment to heat and shape steel into forged parts. Employees are trained to perform multiple crew functions, including blowing scale, applying die lubricant, controlling and positioning heated material with tongs, and operating the forging hammer.
Employees may be assigned to the DG80 Complex or Hammer Shop based on their demonstrated abilities, experience, safety performance, and operational needs. Equipment and specific responsibilities vary by assigned work area.
This is highly physical, fast-paced work. Depending on assignment, operators use long-handled tongs and chain-assisted equipment to control and precisely position extremely heavy heated material. The equipment supports the material's weight, but operators must apply significant physical force and maintain a secure grip. Operators must respond quickly to crew signals and reposition material at the required time while remaining controlled, accurate, and safety-focused.
What You'll Do
  • Work as part of a forge crew to heat, preform, forge, trim, inspect, and move steel parts.
  • Train to perform and rotate through multiple forge-crew functions, including blowing scale from heated material and dies, applying die lubricant, using tongs to control and position heated material, and operating the forging hammer.
  • Assist Hammer Operators, Group Leads, and other crew members with forging operations, equipment setup, and die changes.
  • Use long-handled tongs and chain-assisted equipment to quickly and accurately guide, rotate, reposition, and control extremely heavy heated material in coordination with the Hammer Operator and other crew members.
  • Remove scale from heated material and dies and apply die lubricant at the proper time during the forging cycle.
  • Train to operate the forging hammer, carefully controlling hammer strikes to shape the part according to the required process and coordinating each strike with crew members handling the material.
  • Learn and respond to established hand signals, verbal directions, equipment cues, and the timing of the forging cycle.
  • Rotate among assigned crew stations based on training, demonstrated proficiency, safety performance, and operational needs.
  • Assist with heating, preparing, aligning, and maintaining dies at specified operating temperatures.
  • Operate or assist with forklifts, manipulators, cranes, and other material-handling equipment when assigned and authorized.
  • Inspect forged parts for cracks, mismatch, incomplete fill, scale pitting, surface imperfections, improper trimming, and other visible defects.
  • Use calipers and other assigned measuring tools to verify part requirements.
  • Return material for reheating or additional forging when directed.
  • Complete required equipment inspections and accurately document production and quality information.
  • Report unsafe conditions, equipment problems, process deviations, and potential quality concerns.
  • Package, identify, and move completed parts to the appropriate downstream operation.
  • Maintain a clean work area and follow all PPE, lockout/tagout, safety, quality, and operating procedures.
  • Perform other assigned duties based on production and operational needs.

What We're Looking For
  • High school diploma or GED.
  • Two years of experience in heavy manufacturing, steel, foundry, forging, press operation, industrial production, heavy equipment, or a similar hands-on environment.
  • Forging, forklift, mobile-equipment, high-temperature manufacturing, impact-wrench, or industrial-tool experience is preferred.
  • Ability to safely use industrial tools and work around large machinery, moving equipment, and heated material.
  • Ability to learn a coordinated forging process, follow crew signals, and adjust between fast, controlled material movements and careful hammer operation.
  • Willingness and ability to learn multiple forge-crew stations, including scale blowing, die lubrication, tong operation, and forging-hammer operation.
  • Strong attention to safety, quality, equipment movement, and surrounding crew members.
  • Dependable attendance, reliable transportation, and willingness to learn and work closely with a crew.

Physical Demands and Work Environment
  • Perform physically demanding forging work requiring the safe control and positioning of extremely heavy parts and materials at varying work heights, including work surfaces up to approximately 48 inches.
  • Depending on assignment, repeatedly grip and control long-handled tongs while applying physical force to slightly raise, push, pull, rotate, guide, and position extremely heavy material supported by chain-assisted equipment.
  • Maintain control of supported material and respond safely if it shifts, swings, rolls, binds, or does not align properly.
  • Perform repeated reaching, gripping, pushing, pulling, bending, stooping, balancing, and body positioning throughout the assigned operation.
  • Stand and walk for extended periods while working at a steady and safety-focused pace.
  • Work in an extremely hot and loud heavy-manufacturing environment near steel heated to approximately 2,200°F.
  • Work around furnaces, heated dies, forging hammers, presses, moving equipment, vibration, oil, lubricants, dust, flying scale, sparks, and hot metal particles.
  • Wear all required personal protective equipment throughout the shift, which may include metatarsal safety boots, hard hat, face shield, hearing protection, safety glasses, leather apron, gloves, and long sleeves.

Schedule
Must be flexible and available to work assigned shifts, including a biweekly rotating schedule. Days, evenings, nights, weekends, overtime, and schedule changes may be required based on operational needs.
Why Join ELLWOOD?
ELLWOOD offers a competitive compensation and benefits package, including:
  • Starting pay of $19.00 per hour
  • Medical, dental, and vision insurance beginning on day one
  • Vested 401(k) retirement plan
  • 10 days of vacation and three sick days
  • On-site clinic
  • Shift differential and overtime opportunities
  • Company-provided uniforms and required PPE
  • Advancement opportunities
  • Additional company-sponsored benefits

Employment is contingent upon successful completion of a pre-employment physical, background check, and drug screening.
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
This employer is required to notify all applicants of their rights pursuant to federal employment laws.
For further information, please review the Know Your Rights notice from the Department of Labor.

Apply