ZipRecruiter

Log In

1

Field Operator Jobs (NOW HIRING)

RWDY Inc

Field Operator II

Midland, TX · On-site

$42/hr

Job Title Field Operator II Compensation $42/hr Location Midland - Southeast Schedule 9/5, 6:30 AM - 5:00 PM (30-minute lunch) Target Start Date ASAP Submittal Deadline 7/2/2026 Tentative End Date ...

kinetik

Field Operator

Artesia, NM

Operating and maintaining field glycol dehydration systems including dehydrator glycol pump repair; also, methanol injector pump repair. * Monitoring usage and/or replacing lubricants, fluids ...

Kinetik

Field Operator

Pecos, TX · On-site

The Field Crude Operator will report and maintain the facilities assigned to and perform other activities as required by management. * Maintain motor vehicle in good working order and clean.

RWDY

Field Operator II

Midland, TX · On-site

$42/hr

Job Title Field Operator II Compensation $42/hr Location Midland - Southeast Schedule 9/5, 6:30 AM - 5:00 PM (30-minute lunch) Target Start Date ASAP Submittal Deadline 7/2/2026 Tentative End Date ...

Producers Midstream, LP

Field Operator

Hobbs, NM · On-site

Producers Midstream Job Post Producers Midstream is an equity backed midstream service provider located in Dallas, TX. Field Operator is responsible for the proper and safe operation and maintenance ...

Producers Midstream

Field Operator

Hobbs, NM · On-site

Producers Midstream is an equity backed midstream service provider located in Dallas, TX. Field Operator is responsible for the proper and safe operation and maintenance of all pipelines, measurement ...

Wood PLC

Field Operator

Gillette, WY · On-site

Wood is currently hiring for a Field / Plant Operator to join our team at our Atlas Carbon facility, located near Gillette, WY. This positions is responsible for multiple operations within our Atlas ...

Wood PLC

Field Operator

Gillette, WY

Wood is currently hiring for a Field / Plant Operator to join our team at our Atlas Carbon facility, located near Gillette, WY. This positions is responsible for multiple operations within our Atlas ...

Hasa

Be Seen First

Field Operator 1

Greenville, TX · On-site

$20 - $25/hr

Field Operator I assist the Board Operator I with the running of the plant and less loading. Report what happened on your shift to your relief during pass down. Always include any unusual conditions ...

Kinetik

Field Operator

Artesia, NM · On-site

Operating and maintaining field glycol dehydration systems including dehydrator glycol pump repair; also, methanol injector pump repair. * Monitoring usage and/or replacing lubricants, fluids ...

Kinetik

Field Operator

Artesia, NM · On-site

Operating and maintaining field glycol dehydration systems including dehydrator glycol pump repair; also, methanol injector pump repair. * Monitoring usage and/or replacing lubricants, fluids ...

Kinder Morgan

Field Operator

Snyder, TX · On-site

Work with Field Operators and Supervision to maintain and operate, Submersible Pumps, Manifold Separators, and Tank batteries. * Perform Lock, and Tag out of all equipment in an assigned area ...

Kinder Morgan

Field Operator

Snyder, TX · On-site

Work with Field Operators and Supervision to maintain and operate, Submersible Pumps, Manifold Separators, and Tank batteries. * Perform Lock, and Tag out of all equipment in an assigned area ...

kinetik

Field Operator

Balmorhea, TX

The Field Operator will report and maintain the facilities assigned to and perform other activities as required by management. * Maintain motor vehicle in good working order and clean. * Ability to ...

Kinetik

Field Operator

Pecos, TX · On-site

Field Crude Operator Kinetik is strategically located in the heart of the Delaware Basin in the Permian, one of the fastest growing areas for oil and gas development in the world. We provide the ...

Wood plc

Field Operator

Gillette, WY · On-site

Wood is currently hiring for a Field / Plant Operator to join our team at our Atlas Carbon facility, located near Gillette, WY. This positions is responsible for multiple operations within our Atlas ...

RWDY Inc

Field Operator II

Midland, TX · On-site

$42/hr

Job Title Field Operator II Compensation $42/hr Location Midland - Southeast Schedule 9/5, 6:30 AM - 5:00 PM (30-minute lunch) Target Start Date ASAP Submittal Deadline 7/2/2026 Tentative End Date ...

Apply Early

Hasa

Be Seen First

Field Operator 1

Greenville, TX · On-site

$20 - $25/hr

Field Operator I assist the Board Operator I with the running of the plant and less loading. Report what happened on your shift to your relief during pass down. Always include any unusual conditions ...

Apply Early

next page

Showing results 1-20

All JobsField Operator Jobs

Field Operator information

See salary details

$14

$21

$29

How much do field operator jobs pay per hour?

As of Jul 5, 2026, the average hourly pay for field operator in the United States is $21.63, according to ZipRecruiter salary data. Most workers in this role earn between $17.79 and $25.24 per hour, depending on experience, location, and employer.

What does a Field Operator do?

A Field Operator is responsible for operating and maintaining equipment at worksites, often in industries such as oil and gas, utilities, or manufacturing. Their duties typically include monitoring machinery, conducting inspections, troubleshooting issues, and ensuring that operations run smoothly and safely. Field Operators often work outdoors and may be required to work in shifts or remote locations. They play a crucial role in maintaining productivity and safety standards on site.

What is the difference between Field Operator vs Equipment Operator?

AspectField OperatorEquipment Operator
CredentialsHigh school diploma, safety certificationsHigh school diploma, safety certifications
Work EnvironmentOutdoor, on-site at industrial or construction sitesOutdoor, operating machinery on-site
Industry UsageOil & gas, construction, manufacturingConstruction, mining, logistics
Job FocusMonitoring, maintaining, and operating field equipmentOperating heavy machinery and equipment

Both roles require safety certifications and outdoor work environments, often within the same industries. The main difference is that a Field Operator oversees the operation and maintenance of equipment in the field, while an Equipment Operator primarily focuses on operating specific machinery. Understanding these distinctions helps job seekers find the right role based on their skills and career goals.

What are the key skills and qualifications needed to thrive as a Field Operator, and why are they important?

To thrive as a Field Operator, you need a solid understanding of mechanical systems, troubleshooting, and operational safety procedures, often supported by a high school diploma or technical certification. Familiarity with SCADA systems, process control equipment, and industry-specific safety certifications like HAZWOPER or OSHA are typically required. Strong attention to detail, effective communication, and problem-solving skills help Field Operators excel in dynamic environments. These abilities are crucial to ensure safe, efficient operations and rapid response to issues in the field.

What Is a Field Operator?

A field operator handles large machinery and operates them on site. Depending on the industry, field operators may drive cement trucks to construction sites, or operate waste trucks to load and unload at disposal sites. Their primary duties include following all company operating procedures to set up new machines and equipment, running the machinery in accordance to guidelines, and troubleshooting any problems that arise. The career requires basic mechanical aptitude and familiarity with all company safety rules and regulations.

What are some common challenges Field Operators face when working in remote or outdoor environments?

Field Operators often work in remote or outdoor locations, which can present unique challenges such as exposure to harsh weather conditions, extended hours, and limited access to immediate support or resources. Adapting to rapidly changing environments and troubleshooting equipment issues on-site require strong problem-solving skills and self-reliance. Effective communication with the central operations team is essential to ensure safety and maintain productivity, especially when responding to emergencies or unexpected situations.
More about Field Operator jobs
What cities are hiring for Field Operator jobs? Cities with the most Field Operator job openings:
Who are the top companies hiring for Field Operator jobs? The top employers for Field Operator jobs are:
What states have the most Field Operator jobs? States with the most job openings for Field Operator jobs include:
What job categories do people searching Field Operator jobs look for? The top searched job categories for Field Operator jobs are:
What are popular job titles related to Field Operator jobs? For Field Operator jobs, the most frequently searched job titles are:
Field Operator jobs near you
Infographic showing various Field Operator job openings in the United States as of June 2026, with employment types broken down into 80% Full Time, 18% Part Time, and 2% Contract. Highlights an 99% Physical, and 1% Remote job distribution, with an average salary of $44,993 per year, or $21.6 per hour.
Field Operator II

Field Operator II

RWDY Inc

Midland, TX • On-site

$42/hr

Full-time

Posted 18 days ago

Job description

Job Title
Field Operator II
Compensation
$42/hr
Location
Midland - Southeast
Schedule
9/5, 6:30 AM - 5:00 PM (30-minute lunch)
Target Start Date
ASAP
Submittal Deadline
7/2/2026
Tentative End Date
One year from start date
Scope / Overview
The Field Operator II is responsible for the safe and efficient operation of wells, production equipment, and associated facilities while supporting daily production objectives. This role focuses on optimizing well performance, monitoring equipment reliability, coordinating maintenance activities, and ensuring compliance with all safety, environmental, and operational procedures.
The ideal candidate will have strong upstream production experience with artificial lift systems, including gas lift, ESP, and plunger lift operations, along with the ability to troubleshoot well performance issues and communicate effectively across operations and maintenance teams.
Main Functions
  • Operate wells and production equipment in accordance with operating procedures and safety standards.
  • Monitor equipment and well performance to identify optimization opportunities and reduce equipment failures.
  • Coordinate corrective, predictive, and preventive maintenance activities.
  • Maintain accurate operational logs, reports, and shift handover documentation.
  • Collect product samples and perform field laboratory testing.
  • Support well intervention and wellwork activities.
  • Participate in emergency response activities and incident reporting.
  • Ensure compliance with safety, health, environmental, and security requirements.
Tasks and Responsibilities
  • Implement daily work objectives while maintaining housekeeping, safety, health, environmental, and security standards.
  • Participate in daily toolbox talks and safety meetings.
  • Conduct routine surveillance of wells and equipment to identify abnormal operating conditions.
  • Perform basic maintenance activities as an Equipment Care Technician.
  • Report alarm, emergency, and shutdown system deficiencies.
  • Provide detailed shift handovers to ensure continuity of operations.
  • Coordinate and monitor maintenance work activities.
  • Maintain accurate logbook entries regarding operational events and equipment status.
  • Collect samples for laboratory analysis and perform field tests.
  • Participate in emergency response activities and incident investigations.
  • Communicate operational issues and production concerns to supervisors.
  • Diagnose well performance issues and provide supporting information before requesting well intervention.
  • Verify wellheads and surface equipment are in safe operating condition prior to wellwork activities.
  • Support ongoing well intervention operations as required.
Required Qualifications
  • High school diploma or equivalent.
  • Minimum of 3 years of field operations experience preferred.
  • Previous experience as a Field Technician or Field Operator.
  • Strong written and verbal communication skills.
  • Strong safety mindset with demonstrated commitment to safe work practices.
  • Working knowledge of pipeline operations.
  • Understanding of operations management systems and processes.
  • Knowledge of emergency preparedness procedures.
  • Familiarity with applicable regulations and commercial agreements.
  • Computer proficiency with field reporting and operational systems.
Preferred Experience
  • Pumper experience in upstream oil and gas operations.
  • Hands-on experience with gas lift systems.
  • Working knowledge of ESP and plunger lift operations.
  • Experience troubleshooting well production issues and artificial lift systems.
  • Familiarity with production optimization and well surveillance activities.
Additional Requirements
  • Must reside locally in the Midland area.
  • Participation in a 30-minute in-person meet and greet interview is preferred.
  • Valid driver's license with acceptable driving record.
  • Ability to work outdoors in varying weather conditions.
Equipment Provided
  • Agency-supplied ½-ton truck.
  • Agency-supplied minimal tools (list to be provided).
  • Company-provided 4-gas monitor.

Apply