ZipRecruiter

Log In

1

Contract Motor Control Engineer Jobs in Georgia (NOW HIRING)

Syensqo

I & E Engineer

Augusta, GA

$112K - $140K/yr

Provide instrumentation and electrical control engineering services, including design, estimating ... Design and development of loop sheets, equipment control wiring diagrams, and motor control ...

Syensqo

I & E Engineer

Augusta, GA · On-site

$112K - $140K/yr

Provide instrumentation and electrical control engineering services, including design, estimating ... Design and development of loop sheets, equipment control wiring diagrams, and motor control ...

Faithtechnologies

QA/QC Field Engineer

Atlanta, GA · On-site

The QA/QC Field Engineer is a technical assistant to the field, acting as an internal liaison ... contract requirements. This role also supports the technical tools (i.e. iPads, QA/QC software ...

CAIRE

Firmware Engineer II

Ball Ground, GA · On-site

Utilize programmable hardware and microcontrollers interfacing analog and digital sensors, user interface display and controls, motor control, and electro-pneumatic systems control with pressure ...

Apex Systems

Senior Electrical Engineer

Baxley, GA · On-site

$88K - $115K/yr

Support electrical system design activities involving power distribution systems, switchgear, motor control centers, protective relaying, and associated plant equipment. * Ensure engineering products ...

Faith Technologies

QA/QC Field Engineer

Atlanta, GA · On-site

The QA/QC Field Engineer is a technical assistant to the field, acting as an internal liaison ... contract requirements. This role also supports the technical tools (i.e. iPads, QA/QC software ...

Apex Systems

Senior Electrical Engineer

Baxley, GA · On-site

$88K - $115K/yr

Support electrical system design activities involving power distribution systems, switchgear, motor control centers, protective relaying, and associated plant equipment. * Ensure engineering products ...

Technical Associates

Electrical Engineer

Albany, GA · On-site

... components, motor control centers, cable tray, wireway, conduit, cable, and wire. * Applied ... Application of programmable logic controllers (PLC), distributed control systems (DCS) and similar ...

Technical Associates

Senior Mechanical Engineer

Marietta, GA · On-site

$94K - $125K/yr

Will function as a hands-on engineer providing process and packaging engineering expertise for project design, commissioning, and start-up. Requires approximately 25% travel to client sites for ...

previous page

Showing results 41-60

All JobsContract Motor Control Engineer JobsContract Motor Control Engineer Jobs in Georgia

Contract Motor Control Engineer information

What are popular job titles related to Contract Motor Control Engineer jobs in Georgia?

For Contract Motor Control Engineer jobs in Georgia, the most frequently searched job titles are:

What job categories do people searching Contract Motor Control Engineer jobs in Georgia look for?

The top searched job categories for Contract Motor Control Engineer jobs in Georgia are:

What cities in Georgia are hiring for Contract Motor Control Engineer jobs?

Cities in Georgia with the most Contract Motor Control Engineer job openings:

Contract Motor Control Engineer jobs near you
Infographic showing various Contract Motor Control Engineer job openings in Georgia as of July 2026, with employment types broken down into 1% As Needed, 65% Full Time, 18% Part Time, 1% Temporary, and 15% Contract. Highlights an 81% Physical, 2% Hybrid, and 17% Remote job distribution.

Director, Electrical & Control Systems

Alpharetta, GA • On-site

QUIKRETE Companies
Construction Materials Wholesalers • 10K+ employees
Learn more about QUIKRETE Companiesexternal

$78K - $104K/yr

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Posted 27 days ago

Quikrete rating

7.2

Company rating: 7.2 out of 10

Based on 75 frontline employees who took The Breakroom Quiz

348th of 547 rated manufacturers

Job description

We are looking for a Director, Electrical & Control Systems to join our team in Alpharetta, GA. As a Director, Electrical & Control Systems with QUIKRETE Heavy Construction Materials, you will provide technical leadership and corporate oversight for electrical power distribution, automation, and control systems supporting our cement manufacturing operations. This role partners with plant operations and corporate technical services to improve reliability, safety, operational performance, and continuous improvement initiatives across multiple facilities.
Why Apply?
  • Competitive wages.
  • Company-provided benefits: Medical, Dental, Vision, Company-paid life and disability benefits, paid vacation, and 401(k).

About the Role
Responsibilities:
  • Support the cement division in maintaining an injury-free workplace while promoting OSHA, MSHA, and company safety initiatives.
  • Provide corporate leadership and technical support for the design, specification, installation, commissioning, troubleshooting, and maintenance of medium- and low-voltage electrical power distribution systems, including transformers, motors, generators, switchgear, MCCs, VFDs, instrumentation, compressors, grounding systems, lightning protection, heat trace systems, and other equipment supporting cement production facilities.
  • Prepare, coordinate, and evaluate electrical power system studies, including short circuit, voltage drop, relay coordination, motor starting, load flow, harmonic, and arc flash studies using power system modeling software.
  • Lead the controls and automation scope for corporate capital projects while coordinating contractors, maintenance personnel, production teams, and project stakeholders throughout project execution.
  • Troubleshoot and optimize industrial control systems, field instrumentation, PLCs, industrial networking infrastructure, and automation standards.
  • Support turnkey electrical engineering projects from concept through commissioning while ensuring compliance with engineering drawings, specifications, electrical codes, and company standards.
  • Conduct field inspections and routine audits to verify installation quality, regulatory compliance, and adherence to engineering standards.
  • Collaborate with plant personnel, contractors, and corporate project teams to support new installations, plant expansions, and modernization projects.
  • Participate in Root Cause Analysis (RCA) investigations to improve equipment reliability, reduce downtime, and lower operating costs.
  • Participate in Factory Acceptance Testing (FAT), equipment commissioning, and plant start-up activities as required.
  • Maintain current knowledge of emerging technologies, engineering standards, and best practices for heavy industrial electrical systems.
  • Prepare technical reports, project updates, presentations, and engineering documentation.
  • Perform other duties as assigned by management.

About You
We Require:
  • Bachelor's degree in Electrical Engineering, Computer Engineering, or a related engineering discipline from an ABET-accredited institution preferred.
  • Minimum of 10 years of engineering and supervisory experience in manufacturing, preferably within cement manufacturing, mining, aggregates, lime, or other heavy industrial environments.
  • Strong passion for industrial power distribution, motor controls, automation, and heavy industrial electrical systems.
  • Experience with 15kV, 5kV, and 480V industrial power distribution systems supporting rotary kilns, conveyors, compressors, pumps, fans, and similar process equipment.
  • Experience specifying, installing, commissioning, troubleshooting, and maintaining motors, transformers, switchgear, MCCs, VFDs, starters, lighting systems, conduit systems, cable schedules, and related electrical equipment.
  • Experience preparing project narratives, technical specifications, RFPs, and RFQs for electrical systems and motor control equipment.
  • Ability to develop and interpret electrical design documents including single-line diagrams, riser diagrams, wiring diagrams, network diagrams, motor elementary drawings, equipment lists, I/O lists, conduit schedules, cable schedules, and electrical load calculations.
  • Strong understanding of industrial automation, instrumentation, PLC-based control systems, and industrial communication networks.
  • Working knowledge of NFPA 70 and NFPA 70E standards.
  • Familiarity with GE Multilin, Schweitzer Engineering Laboratories (SEL), Siemens protective relays, or similar equipment is preferred.
  • Experience using SKM, ETAP, EasyPower, or similar power system analysis software is preferred.
  • Strong leadership, organizational, communication, and interpersonal skills.
  • Excellent written and verbal communication skills with the ability to effectively collaborate across multiple departments.
  • Proficiency with Microsoft Word, Excel, PowerPoint, Outlook, and Microsoft Project.
  • Ability to work independently while managing multiple projects and priorities with minimal supervision.

We Prefer:
  • Professional Engineer (P.E.) license is preferred.
Physical Requirements:
  • Ability to safely climb stairs, ladders, and industrial equipment, including work at heights up to 350 feet.
  • Ability to walk up to 200 yards over rough, uneven, wet, or slippery terrain.
  • Ability to stand, walk, bend, kneel, crouch, climb, reach, push, pull, twist, balance, and squat throughout the workday.
  • Ability to use required personal protective equipment (PPE) while working in industrial environments.
  • Ability to safely operate standard office equipment, including computers, telephones, printers, and copiers.
  • Sufficient visual acuity and hearing to recognize safety alarms, hazards, and warning indicators.
  • Valid driver's license with the ability to travel by automobile and commercial airline.
  • Ability to travel overnight to manufacturing facilities as required.
Working conditions:
Must be able to safely work in heavy industrial manufacturing environments exposed to varying weather conditions, elevated noise levels up to 120 dBA, vibration, mechanical and electrical hazards, and airborne materials including cement, gypsum, clay, sand, dust, diesel exhaust, lubricants, solvents, and fuels while following all applicable safety policies and PPE requirements.
About Us
Each day brings new challenges, and we make sure you are prepared for it all. Our dedication to continual improvement and hands-on training ensures you are ready for the many new experiences and challenges that you will face.
We offer:
  • A friendly and team-oriented work environment with a supportive management team.
  • Hands-on training and opportunities for professional growth and advancement.
  • A company dedicated to continuous improvement.

Ready to Apply?
The process is simple. Click on the Apply Now button to get started. Good luck!
#LI-DR1
#QKCM
  • Apply
  • View All Jobs

What Quikrete employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply