1

Apprentice Network Engineer Jobs in California (NOW HIRING)

Cable Splicer

Oakland, CA · On-site

$67.58/hr

Background of apprenticeship and experience must be such as to qualify an employee to perform these ... Isolate Network grid secondary's and Network Protectors (NP's). * Install and remove Recording Volt ...

Cable Splicer

Oakland, CA · On-site

$67.58/hr

Background of apprenticeship and experience must be such as to qualify an employee to perform these ... Isolate Network grid secondary's and Network Protectors (NP's). * Install and remove Recording Volt ...

Test Technician

Simi Valley, CA

$14.47 - $18.09/hr

  • Medical

  • Dental

  • Vision

  • Retirement

... engineering. You will work onsite on first shift (M-F, 5:00 AM-1:30 PM) and collaborate with ... Set up and operate test equipment (oscilloscopes, DVMs, signal generators, network/spectrum ...

Lead AV Technician

San Diego, CA · On-site

$35 - $45/hr

  • Medical

  • Dental

  • Vision

  • Retirement

  • PTO

Advanced networking/data system installation and setup * Strong programming of advanced systems ... Proficient in all Lead level qualifications * Assist in training and evaluation of apprentice ...

Test Technician

Simi Valley, CA

$19.52 - $24.40/hr

  • Medical

  • Dental

  • Vision

  • Retirement

... and engineering stakeholders. Here's How You'll Make an Impact on the Team * Perform routine ... Use test equipment such as oscilloscopes, DVM, signal generators, power meters, network and ...

Test Technician

Simi Valley, CA

$15 - $18.08/hr

  • Medical

  • Dental

  • Vision

  • Retirement

You will work closely with production and engineering teams to diagnose failures and provide clear ... Set up and operate test equipment (oscilloscopes, DVMs, signal generators, spectrum/network ...

Test Technician

Simi Valley, CA

$19.39 - $24.24/hr

  • Medical

  • Dental

  • Vision

  • Retirement

You will collaborate with production, engineering, and quality teams to diagnose failures and ... Set up and operate test equipment (oscilloscopes, DVMs, signal generators, power meters, network ...

Test Technician - Part Time

Simi Valley, CA

$15 - $18.08/hr

  • Medical

  • Dental

  • Vision

  • Retirement

Provide detailed written failure descriptions and root cause analysis to production and engineering ... Vocational training, apprenticeship, or equivalent experience in a related field * Familiarity with ...

Test Technician

Simi Valley, CA · On-site

$19.39 - $24.24/hr

  • Medical

  • Dental

  • Vision

  • Retirement

You will work closely with production and engineering stakeholders to verify circuitry, diagnose ... Set up and execute tests using oscilloscopes, DVMs, signal generators, power supplies, network ...

Showing results 41-60

Apprentice Network Engineer information

What skills and qualifications are needed to be an apprentice network engineer?

To thrive as an Apprentice Network Engineer, you need a basic understanding of networking concepts such as TCP/IP, routing, and switching, often supported by foundational certifications like CompTIA Network+ or Cisco CCNA. Familiarity with network monitoring tools, configuration software, and ticketing systems is highly valuable. Strong problem-solving skills, attention to detail, and a willingness to learn are essential soft skills that help you excel in this position. These abilities are crucial for supporting network operations, troubleshooting issues efficiently, and growing within dynamic IT environments.

What do apprentice network engineers do?

As an Apprentice Network Engineer, your daily responsibilities may include assisting with network setup and configuration, monitoring network performance, troubleshooting connectivity or hardware issues, and updating documentation. You’ll often work closely with senior engineers, following their guidance while gradually taking on more complex assignments as your skills advance. Many roles also involve helping with the installation of new devices, running cables, and responding to technical support tickets. This hands-on experience is designed to build your technical foundation while giving you exposure to real-world IT environments and collaborative teamwork.

What is an apprentice network engineer?

An Apprentice Network Engineer is an entry-level role where individuals gain hands-on experience working with computer networks under the guidance of experienced engineers. They assist in configuring, maintaining, and troubleshooting network systems while learning about networking protocols, security, and infrastructure. This role is typically part of a structured apprenticeship program that combines on-the-job training with formal education. Apprentices develop technical skills, earn industry certifications, and prepare to transition into full-time network engineering roles.

What are the most commonly searched types of Network Engineer jobs in California?

The most popular types of Network Engineer jobs in California are:

What cities in California are hiring for Apprentice Network Engineer jobs?

Cities in California with the most Apprentice Network Engineer job openings:

Infographic showing various Apprentice Network Engineer job openings in California as of August 2026, with employment types broken down into 1% As Needed, 79% Full Time, 12% Part Time, 2% Temporary, and 6% Contract. Highlights an 92% Physical, 3% Hybrid, and 5% Remote job distribution.

$67.58/hr

Full-time

Re-posted 22 days ago


Job description

Requisition ID # 169729 

Job Category: Maintenance / Construction / Operations 

Job Level: Individual Contributor

Business Unit: Electric Operations

Work Type: Onsite

Job Location: Oakland

Department Overview

The workers of Electric Operations ensure the delivery of safe and reliable electric service to our customers. Electric Operations is responsible for every aspect of PG&E's electric distribution and transmission operations, including planning, engineering, maintenance and construction, asset management, business planning, restoration and emergency response.

Position Summary

This classification is represented by IBEW Local 1245, which has over 100 years of experience representing employees at PG&E. This job is subject to collective bargaining.

A coworker who has the qualifications of a Cable Splicer, is familiar with the underground system and has the experience and ability to analyze cable and equipment troubles quickly and to restore services promptly by replacing fuses, switching, disconnecting defective cables or apparatus, making repairs, etcetera. May be required to perform other underground work such us preparing cable racks, pulling in and racking cables, maintaining equipment in the underground system, etc. Shall install and maintain services, meters, and equipment including conduit and wiring up to the meter on customers' premises and shall handle trouble in such installations. Drives a truck and operates the associated equipment as assigned. Background of apprenticeship and experience must be such as to qualify an employee to perform these duties with skill and efficiency. Shall be familiar with Company's standards, procedures and safety regulations. 

This position may be subject to Joint Apprentice Training Committee (JATC) review and approval. Provisional hires will be required to participate in targeted training to achieve journey-level knowledge of electrical technician roles and responsibilities.

This position is in the Bay Area region, and headquarters in Oakland subject to change based on business needs.

This position is a DOT (Department of Transportation) covered classification and is subject to random drug and/or alcohol screening.

PG&E is providing the hourly rate that the company in good faith believes it might pay for this position at the time of the job posting. This position is subject to collectively bargained hourly wage rates and increases. The starting wage rate for this position is $67.58 per hour.  This wage rate is specific to the locality of the job. The wage rate is based on multiple factors, including, but not limited to, specific skills, education, licenses or certifications, experience, market value, geographic location, collective bargaining agreements, and internal equity.  

Job Responsibilities

  • Perform all necessary duties with skill and efficiency by performing maintenance on underground transmission and distribution lines.
  • Perform work in connection with the construction and maintenance of underground manholes, vaults, splice boxes, duct lines and similar structures.
  • Installs and maintains services, meters, and equipment including conduit and wiring up to the meter on customers' premises
  • Maintains equipment in the underground system
  • Prepares cable racks
  • Pulls and racks underground cables and wires into and out of pipes, conduits and duct lines.
  • Splices cables of any kind or voltage for the connection of cable, transformers, junction boxes, and other equipment in the underground or overhead systems or stations.
  • Ensure effective customer and internal communication.
  • Restore service to the public by installing / repairing services and all types of meters.
  • Analyze cable and equipment trouble quickly and restore services promptly by replacing fuses, switching, disconnecting defective cable on apparatus efficiently.
  • Identify the location of and extent to which underground structures such as man holes and vaults have been damaged and perform minor repairs safely on underground enclosures.
  • Isolate Network grid secondary’s and Network Protectors (NP’s).
  • Install and remove Recording Volt Meters (RVM’s) for power quality research.
  • Physically demanding work that may include lifting, climbing, as well as going into confined spaces.
  • Drive trucks, vans, and equipment and operate the associated equipment as assigned.
  • May work with crew or independently. May oversee a crew and its equipment engaged in pulling underground cables and wires of all sizes, types, lengths and number of conductors into and out of pipes, conduits and duct lines and other necessary work in conjunction with pulling of cables.
  • Support and maintain a working relationship with other departments which include, Distribution Operators, Service Op drive erectors, Engineering, Estimating and Construction to improve processes and ensure a high level of customer service.
  • Working knowledge of applicable safety rules, programs and safe work practices.
  • Expected to learn and follow safety and work procedures.
  • Working knowledge of available mobile technical software.

Qualifications

Minimum:

  • CA CDL Class A Permit, or equivalent, subject to 150% driver/vehicle ratio
  • Knowledge of procurement strategies and processes and relevant regulatory framework as needed to perform at the job level
  • Must be at least 18 years of age
  • Must possess a High School diploma or GED
  • Completion of formal union sanctioned Cable Splicer apprenticeship
  • Must possess an IBEW journey- level card for a Cable Splicer or State or JATC certification
  • Must be able to lift 90 lbs
  • Able to wear company provided Personal Protective Equipment (PPE)
  • Able to work and drive in all types of weather and road conditions
  • Able to work extended hours, nights, weekends and holidays
  • Able to travel to job sites as necessary
  • Ability to work shift schedule (evening)
  • Ability to complete and obtain a 40 hour Switchman Training Certification/Card
  • Must pass Post-Offer Physical Assessment as a requirement of the pre-employment process
  • If hired as Provisional, must pass the provisional training plan within one year from hire date
  • Must qualify on Cable Splicer Assessment 
    • Internal PG&E Employees:
      • Must possess and maintain a valid Class C California Driver's License (or higher) by Day 1 of hire
      • Must possess and maintain a valid Class A California Driver's License Permit by within 3 months of hire
    • External:
      •  Must possess and maintain a valid Class A California Driver's License Permit by Day 1 of hire
      • Must possess and maintain a valid DMV Medical Card by Day 1 of hire

Desired:

  • Live within 30 minutes of headquarters due to emergency and urgent requests
  • Experience as a cable splicer with familiarity of underground and network systems (lead training)
  • Minimum of two years of experience as a Journey Cable Splicer
  • Relevant PG&E/Hiring Hall experience
  • Ability to install transition splices, clear cap, straight splices, terminations and other various splices
  • Ability to properly ground conductor cable and equipment
  • Ability to install switches, transformers and banking transformers
  • Ability to build risers
  • Ability to tag and identify underground cable and equipment
  • Ability to operate load break and dead break equipment
  • Ability to phase lines and equipment
  • Ability to make and trace service connections
  • Ability to build to PG&E & G.O. 128 standards
  • Qualified to work on primary and secondary voltages
  • Ability to work on lead splices such as hot solder wipes
  • Ability to work on network systems and its equipment

Pre-Employment Testing

PG&E Employees: You must have qualified on all prerequisite tests prior to submitting an application, and all secondary tests prior to interviewing. For more information on prerequisite and secondary exams, including study guides, please visit the Pre-employment testing program website.

  • Physical Test Battery
  • Post-Offer Physical Assessment Apprentice Cable Splicer
  • Work Orientation Inventory-Physical/Technical Driving
  • Cable Splicer Assessment