ZipRecruiter

Log In

Summit
Summit

66 Summit Machining Jobs Hiring Near You

Summit Polymer

Mold Technician 1st shift

Portage, MI · On-site

$22.34/hr

... for molding machine setups, start-ups, operation, and shut-downs. Must follow all standard work procedures including daily use of Summit Lean Manufacturing System tools. Completes process ...

Summit Polymer

Technician 2 (Molding) - Shift 3

Vicksburg, MI · On-site

$18.50 - $24.25/hr

... for molding machine setups, start-ups, operation, and shut-downs. Must follow all standard work procedures including daily use of Summit Lean Manufacturing System tools. Completes process ...

Summit TRC

Automated Test Engineer

Huntsville, AL

$42.75 - $56.50/hr

Learn more about Summit TRC at our website. Be sure to check out our Careers page! Must be a US ... Knowledge of virtual machines and hypervisor-based environments is a plus * Experience using ...

HiFyve

CNC Machinist

Lees Summit, MO

$25 - $32.25/hr

Lee's Summit, MO Job Duties and Responsibilities Set up, adjust, and operate CNC machines (3, 4, and 5 Axis) to perform precision machining operations. Align and secure holding fixtures, cutting ...

Summit Products

Press Break Operator (night shift)

Altoona, IA · On-site

$17.50 - $23/hr

... Summit Products is looking for a Laser Operator. A Press Brake Operator is responsible for setting up, operating, and maintaining press brake machines to bend, shape, cut, and manipulate sheet metal ...

Summit Interconnect, Inc.

Route Operator

Anaheim, CA · On-site

$18 - $20/hr

... Summit Traveler. Knowledge of Military and Commercial work. Using calipers and micrometer and measurement eye loop. Knowledge of route setup programs, edit CNC, setup Router machine/table (e.g ...

Summit Interconnect, Inc.

Route Operator

Anaheim, CA · On-site

$18 - $22/hr

... Summit Traveler. Knowledge of Military and Commercial work. Using calipers and micrometer and measurement eye loop. Knowledge of route setup programs, edit CNC, setup Router machine/table (e.g ...

Summit Interconnect, Inc.

Route Operator

Anaheim, CA · On-site

$18 - $20/hr

... Summit Traveler. Knowledge of Military and Commercial work. Using calipers and micrometer and measurement eye loop. Knowledge of route setup programs, edit CNC, setup Router machine/table (e.g ...

Summit Interconnect, Inc.

Route Operator

Anaheim, CA

$18 - $22/hr

... Summit Traveler. Knowledge of Military and Commercial work. Using calipers and micrometer and measurement eye loop. Knowledge of route setup programs, edit CNC, setup Router machine/table (e.g ...

Summit Racing Equipment

CNC Machinist Level 2

Tallmadge, OH · On-site

$19 - $26/hr

Prepare castings for CNC machining including the installation of components. * Deburr, wash, and ... Summit Racing Equipment and its entities provide equal employment opportunities to all employees ...

Summit Companies

Electrician

Hartford, CT

$25.25 - $34.50/hr

... machinery and tools in good operating condition; working in the many diversified capacities ... Summit Fire & Security , a subsidiary of SFP Holding, Inc. (Summit Companies), is a full-service ...

previous pagenext page

Showing results 21-40

All JobsSummit Machining Jobs

Summit Jobs Information

What is it like to work at Summit?

Summit is a company that values collaboration and innovation, fostering a dynamic and supportive work environment where employees can share ideas and expertise.

The company's structure is designed to encourage teamwork and open communication, with a flat organizational hierarchy and regular cross-functional meetings. Summit's mission is to develop cutting-edge technologies that drive positive change, and employees are encouraged to contribute to this mission through various projects and initiatives.

Working at Summit may appeal to candidates who are passionate about technology and social impact, as the company offers opportunities for professional growth, skill development, and collaboration with a diverse and talented team.

What makes Summit an attractive place to work?

Summit is a well-established company in its industry, known for its commitment to innovation and customer satisfaction. The company's work environment is characterized by a collaborative culture, opportunities for professional growth, and a stable work-life balance. Joining Summit offers employees the chance to contribute to meaningful projects, develop their skills, and be part of a dynamic team that values teamwork and employee development.

What are the most popular job types at Summit?

    What are the most popular jobs at Summit?

    What are the most popular categories at Summit?

    Infographic showing various Machining job openings at Summit in the United States as of August 2026, with employment types broken down into 93% Full Time, and 7% Part Time. Highlights an 96% Physical, 1% Hybrid, and 3% Remote job distribution.

    Mold Technician 1st shift

    Summit Polymer

    Portage, MI • On-site

    $22.34/hr

    Full-time

    Re-posted 20 days ago

    Summit Polymers rating

    5.8

    Company rating: 5.8 out of 10

    Based on 37 frontline employees who took The Breakroom Quiz

    72nd of 84 rated plastic manufacturers

    Job description

    Summit Polymers is a leading, global supplier of automotive interior systems including consoles, door panels, and instrument panels. With over 50 years serving the industry, we deliver engineering and product excellence to our customers, on time, in budget, with the latest innovations.
    JOIN A TEAM WHERE YOU'LL BE CHALLENGED AND valued.
    A career with Summit Polymers means working with smart people in a culture that thrives on challenging, meaningful work. At Summit, we look for growth potential with every hire. We don't just fill seats, we set people on career paths. We're always on the lookout for smart people who are committed to continuous improvement, customer service and quality.
    JOB DESCRIPTION
    JOB TITLE: Mold Technician 1 FLSASTATUS: Non Exempt
    Mold Technician 2
    Mold Technician 3
    REPORTS TO: Supervisor, Manufacturing (Molding)
    SUMMARY
    This is a hands-on technical position responsible for molding machine setups, start-ups, operation, and shut-downs. Must follow all standard work procedures including daily use of Summit Lean Manufacturing System tools. Completes process verifications, perform 1st piece/last piece inspections and perform routine quality checks. Responsible for ensuring that machines, molds and equipment are properly functioning and maintained. Identify problems and perform basic troubleshooting, according to knowledge and work experience. Duties will also include general housekeeping, visual production management and product flow, compliance to environmental and safety procedures and assisting with Operator/Utility tasks.
    RESPONSIBILITIES AND DUTIES:
    The fully trained and qualified Mold Tech is capable of completing the following tasks under general supervision:
    • Safely performing injection mold changes and machine start-ups in the proper sequence and within time standards
      • Complying with all SPI requirements for Personal Protective Equipment such as, but not limited to, hard hats, heat gloves/sleeves, steel toed shoes, eye protection, etc.
      • Performing lockout/tagout per requirements and safely operating equipment such as cranes, side load systems, hot runner controllers, etc. per standard work procedures.
    • Troubleshooting basic machine and equipment problems
    • Troubleshooting basic robot problems
    • Demonstrating basic knowledge of mold construction and function and is able to assist in the initial troubleshooting process
    • Performing basic Robot End-Of-Arm-Tooling maintenance and repair
    • Completing machine process adjustments, within prescribed limits, to ensure that product meets specifications
    • Identifying non-standard work and machine conditions that are potential safety concerns and taking appropriate action
    • Effectively communicating and advising on product and production concerns with peers on other shifts
    • Assisting the supervisor in managing shift activities and training of operators, utilities and other mold techs.
    • Completing daily production paperwork
    • Utilizing Summit Lean Manufacturing Systems principles to monitor inventory, schedule and run production
    • Following general housekeeping principles
    • Assisting with giving Operator/Utility breaks
    • Assisting, as needed, in the grinding of runners and scrap parts.

    Training
    The Mold Tech position is a progressive position requiring diligent completion of training requirements over 3 levels and within prescribed time frames in order to achieve fully qualified status and remain in the position.
    • Level 1 Side Load - Completed within 5 weeks of placement in position
      • Upon completion and under direct supervision, the Tech will:
        • Be able to safely perform a side load mold change and perform the basic quality tasks
        • Have completed the training modules and tests as outlined in the Mold Tech Training Progression Checklist for Level 1 Side Load

    • Level 1 Top Load - Completed within 2 weeks of completion of Level 1 Side Load (6 weeks after hire)
      • Upon completion and under direct supervision, the Tech will:
        • Be able to safely perform a top load mold change using a crane
        • Have completed the training modules and tests as outlined in the Mold Tech Training Progression Checklist for Level 1 Top Load

    • Level 2 - Completed within 18 weeks of completion of the Level 1 Top Load (24 weeks after hire)
      • Upon completion and under general supervision, the Tech will:
        • Be able to safely and efficiently perform both side load and top load set-ups, meeting the time requirements and execution per the standard work procedure
        • Be able to do a full start-up, completing all required checks and documentation
        • Be able to do limited troubleshooting of the process and equipment and make adjustments if required
        • Have completed the training modules and tests as outlined in the Mold Tech Training Progression Checklist for Level 2

    • Level 3 - Completed within 54 weeks of completion of Level 2 (18 months after hire)
      • Upon completion and under general supervision, the Tech will:
        • Be able to meet all the Mold Tech Level 3 requirements outlined above
        • Have completed the training modules and tests as outlined in the Mold Tech Training Progression Checklist for Level 3

    REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES:
    • Agreement to complete of all required post-hire training modules within specified time frame
    • A minimum score in the 50th percentile on the DAT Mechanical Reasoning Test
    • A minimum score of 50 on the Wonderlic Select (Traditional score of 16 on the Cognitive portion)
    • Meet the physical requirements for the position
      • Physically capable of standing and walking for the entire shift
      • Must be able to lift 60 pounds repeatedly
      • Repeated bending and lifting during the shift
      • Must be able to wear steel-toed footwear
      • Adequate visual acuity to enter/revise molding press programming
      • Must be able to meet requirements for crane license
      • Must be capable of exerting up to 150 foot pounds on torque wrench
      • Must be able to work around a magnetic field

    TRAVEL REQUIREMENTS
    This position typically does not require any travel.
    DISCLAIMER
    The information contained in this job description is not intended to be an all-inclusive list of the duties and responsibilities of the job, nor are they intended to be an all-inclusive list of the skills and abilities required to do the job. Management may, at its discretion, assign or reassign duties and responsibilities to this job at any time. Agreement to complete all post-hire required training.

    What Summit Polymers employees say

    Pay

    Benefits

    Hours and flexibility

    Workplace

    Get the full story on Breakroom

    Apply