VP of Aircraft Maintenance
Mesa, AZ · On-site
Airborne training services Including tactical "Red Air" services Electronic warfare Radar theory Other combat tactics TAC, which previously operated as Advanced Training Systems International, Inc ...
Mesa, AZ · On-site
Airborne training services Including tactical "Red Air" services Electronic warfare Radar theory Other combat tactics TAC, which previously operated as Advanced Training Systems International, Inc ...
Mesa, AZ · On-site
Airborne training services Including tactical "Red Air" services Electronic warfare Radar theory Other combat tactics TAC, which previously operated as Advanced Training Systems International, Inc ...
Mesa, AZ · On-site
With its impressive fleet of aircraft it offers: • Airborne training services • Including tactical "Red Air" services • Electronic warfare • Radar theory • Other combat tactics TAC, which ...
Mesa, AZ · On-site
With its impressive fleet of aircraft it offers: • Airborne training services • Including tactical "Red Air" services • Electronic warfare • Radar theory • Other combat tactics TAC, which ...
Erlanger, KY · On-site
$75K - $102K/yr
At Atlas Air Worldwide, we're not just an airline, we're a global engine powering cargo, passenger ... TAC) Time Since Last Shop Visit (TSLSV) as applicable Cycles Since Last Shop Visit (CSLSV) as ...
Erlanger, KY · On-site
$75K - $102K/yr
At Atlas Air Worldwide, we're not just an airline, we're a global engine powering cargo, passenger ... TAC) Time Since Last Shop Visit (TSLSV) as applicable Cycles Since Last Shop Visit (CSLSV) as ...
Fort Liberty, NC · On-site
$16.75 - $19.75/hr
Receive and process truckload, less than truckload, air clearances and small package shipments utilizing CMOS, ETA, TGIS and TGET. * Verifies TAC codes by comparing the FVUA document as required.
Fort Liberty, NC · On-site
$16.75 - $19.75/hr
Receive and process truckload, less than truckload, air clearances and small package shipments utilizing CMOS, ETA, TGIS and TGET. * Verifies TAC codes by comparing the FVUA document as required.
Fort Liberty, NC · On-site
$18 - $23.75/hr
Receive and process truckload, less than truckload, air clearances and small package shipments utilizing CMOS, ETA, TGIS and TGET. * Verifies TAC codes by comparing the FVUA document as required.
Fort Liberty, NC · On-site
$18 - $23.75/hr
Receive and process truckload, less than truckload, air clearances and small package shipments utilizing CMOS, ETA, TGIS and TGET. * Verifies TAC codes by comparing the FVUA document as required.
Phelps, NY · On-site
... air handlers and fan coil units. Ability to operate chillers & boilers required. Trouble shooting DDC controls and experience with building automation systems, (Ex: Alerton, Siemens and Tac-Vista ...
Phelps, NY · On-site
... air handlers and fan coil units. Ability to operate chillers & boilers required. Trouble shooting DDC controls and experience with building automation systems, (Ex: Alerton, Siemens and Tac-Vista ...
Andrews, TX · On-site
$44K - $58K/yr
Operate specialized testing equipment, including ball and seat testers, vacuum testers, and air ... Minimum of 3 years of hands-on experience as a TAC Technician or Rod Pump Technician required.
Andrews, TX · On-site
$44K - $58K/yr
Operate specialized testing equipment, including ball and seat testers, vacuum testers, and air ... Minimum of 3 years of hands-on experience as a TAC Technician or Rod Pump Technician required.
Battle Creek, MI · On-site
$93K - $116K/yr
... TAC group companies, DMTN, DNJP, etc.) * Willingness to work overtime when necessary. Duties and Responsibilities: * Overall lead for controls engineering for HVAC Final Assembly * Daily production ...
Battle Creek, MI · On-site
$93K - $116K/yr
... TAC group companies, DMTN, DNJP, etc.) * Willingness to work overtime when necessary. Duties and Responsibilities: * Overall lead for controls engineering for HVAC Final Assembly * Daily production ...
Battle Creek, MI · On-site
$93K - $116K/yr
... TAC group companies, DMTN, DNJP, etc.) * Willingness to work overtime when necessary. Duties and Responsibilities: * Overall lead for controls engineering for HVAC Final Assembly * Daily production ...
Battle Creek, MI · On-site
$93K - $116K/yr
... TAC group companies, DMTN, DNJP, etc.) * Willingness to work overtime when necessary. Duties and Responsibilities: * Overall lead for controls engineering for HVAC Final Assembly * Daily production ...
$66K - $89K/yr
Naval Air Systems Command, Joint Test and Evaluation Joint Program Office (JT&E JPO), software development for Overtone Software (used by U.S. Army) and TAC Worldwide, and US NRC international ...
$66K - $89K/yr
Naval Air Systems Command, Joint Test and Evaluation Joint Program Office (JT&E JPO), software development for Overtone Software (used by U.S. Army) and TAC Worldwide, and US NRC international ...
Suffolk, VA · On-site
$66K - $89K/yr
Naval Air Systems Command, Joint Test and Evaluation Joint Program Office (JT&E JPO), software development for Overtone Software (used by U.S. Army) and TAC Worldwide, and US NRC international ...
Suffolk, VA · On-site
$66K - $89K/yr
Naval Air Systems Command, Joint Test and Evaluation Joint Program Office (JT&E JPO), software development for Overtone Software (used by U.S. Army) and TAC Worldwide, and US NRC international ...
Fort Lauderdale, FL · On-site
$159K/yr
The Data Center Manager (DCM) is responsible for the overall management, operation, maintenance, and budgeting of the Technical Assistance Center (TAC), as well as the electrical, mechanical, and HVA ...
Fort Lauderdale, FL · On-site
$159K/yr
The Data Center Manager (DCM) is responsible for the overall management, operation, maintenance, and budgeting of the Technical Assistance Center (TAC), as well as the electrical, mechanical, and HVA ...
Midland, TX · On-site
Operate specialized testing equipment, including ball and seat testers, vacuum testers, and air ... Minimum of 1 year of hands-on experience as a TAC Technician or Rod Pump Technician required.
Midland, TX · On-site
Operate specialized testing equipment, including ball and seat testers, vacuum testers, and air ... Minimum of 1 year of hands-on experience as a TAC Technician or Rod Pump Technician required.
Lamesa, TX · On-site
Operate specialized testing equipment, including ball and seat testers, vacuum testers, and air ... Minimum of 1 year of hands-on experience as a TAC Technician or Rod Pump Technician required.
Lamesa, TX · On-site
Operate specialized testing equipment, including ball and seat testers, vacuum testers, and air ... Minimum of 1 year of hands-on experience as a TAC Technician or Rod Pump Technician required.
Midland, TX · On-site
Operate specialized testing equipment, including ball and seat testers, vacuum testers, and air ... Minimum of 1 year of hands-on experience as a TAC Technician or Rod Pump Technician required.
Midland, TX · On-site
Operate specialized testing equipment, including ball and seat testers, vacuum testers, and air ... Minimum of 1 year of hands-on experience as a TAC Technician or Rod Pump Technician required.
Lamesa, TX · On-site
Operate specialized testing equipment, including ball and seat testers, vacuum testers, and air ... Minimum of 1 year of hands-on experience as a TAC Technician or Rod Pump Technician required.
Lamesa, TX · On-site
Operate specialized testing equipment, including ball and seat testers, vacuum testers, and air ... Minimum of 1 year of hands-on experience as a TAC Technician or Rod Pump Technician required.
Operate specialized testing equipment, including ball and seat testers, vacuum testers, and air ... Minimum of 1 year of hands-on experience as a TAC Technician or Rod Pump Technician required.
Quick apply
Operate specialized testing equipment, including ball and seat testers, vacuum testers, and air ... Minimum of 1 year of hands-on experience as a TAC Technician or Rod Pump Technician required.
Lamesa, TX · On-site
Operate specialized testing equipment, including ball and seat testers, vacuum testers, and air ... Minimum of 1 year of hands-on experience as a TAC Technician or Rod Pump Technician required.
Lamesa, TX · On-site
Operate specialized testing equipment, including ball and seat testers, vacuum testers, and air ... Minimum of 1 year of hands-on experience as a TAC Technician or Rod Pump Technician required.
Carlsbad, NM · On-site
Operate specialized testing equipment, including ball and seat testers, vacuum testers, and air ... Minimum of 1 year of hands-on experience as a TAC Technician or Rod Pump Technician required.
Carlsbad, NM · On-site
Operate specialized testing equipment, including ball and seat testers, vacuum testers, and air ... Minimum of 1 year of hands-on experience as a TAC Technician or Rod Pump Technician required.
Carlsbad, NM · On-site
Operate specialized testing equipment, including ball and seat testers, vacuum testers, and air ... Minimum of 1 year of hands-on experience as a TAC Technician or Rod Pump Technician required.
Carlsbad, NM · On-site
Operate specialized testing equipment, including ball and seat testers, vacuum testers, and air ... Minimum of 1 year of hands-on experience as a TAC Technician or Rod Pump Technician required.
$9.62 - $13.46
7% of jobs
$13.46 - $17.31
15% of jobs
$17.77 is the 25th percentile. Wages below this are outliers.
$17.31 - $21.15
22% of jobs
The median wage is $22.36 / hr.
$21.15 - $25
17% of jobs
$25 - $28.85
11% of jobs
$30.45 is the 75th percentile. Wages above this are outliers.
$28.85 - $32.69
6% of jobs
$32.69 - $36.54
4% of jobs
$36.54 - $40.38
5% of jobs
$40.38 - $44.23
5% of jobs
$44.23 - $48.08
3% of jobs
$48.08 - $51.92
3% of jobs
$9
$27
$51
To thrive as a Tac Air (Tactical Air Operations Specialist), you need strong knowledge in air combat tactics, situational awareness, and military procedures, often supported by formal military training or relevant certifications. Familiarity with advanced flight simulation systems, radio communications equipment, and mission planning software is essential. Exceptional decision-making, clear communication, and teamwork skills are highly valued in this position. These competencies are crucial for coordinating air operations effectively and ensuring mission success in high-pressure environments.
A Tac Air job typically refers to a position in tactical aviation, involving roles such as pilot, air traffic controller, or aviation support specialist. Jobs in this field are often associated with military or defense contracting operations, providing close air support, reconnaissance, or air combat training. Employees may work with advanced aircraft and simulation systems to train military personnel or support operational missions. These roles require specialized training, certifications, and often prior military aviation experience.
In a Tac Air position, your daily tasks usually involve planning and executing tactical air missions, coordinating with ground and air units, and monitoring mission progress using specialized technology. You’ll often participate in briefings, update mission plans based on intelligence or changing conditions, and maintain detailed records of all operations. You may also assist in training newer team members or conducting simulations to ensure readiness. The work environment is highly collaborative, with close interactions between pilots, ground controllers, mission planners, and technical specialists. This role offers a dynamic pace and the opportunity to develop advanced operational and leadership skills.

Full-time
Re-posted 11 days ago
Top Aces Corp (TAC) is a US Based company headquartered in Mesa, AZ specializing in airborne training services. With its impressive fleet of aircraft it offers:
Airborne training services
Including tactical "Red Air" services
Electronic warfare
Radar theory
Other combat tactics
TAC, which previously operated as Advanced Training Systems International, Inc. (ATSI),
Has a solid background in providing airborne training services to the US Navy and US Air Force, and has
Also provided advanced operational test and evaluation services such as air-to-air refueling trials.
SUMMARY: Reporting to the Company President, the position is responsible for leading the overall Maintenance and Logistics function of the U.S. operations, which is responsible for the maintenance of over 30 aircraft and supporting the operational growth of the company. This role provides strategic input toward the direction of the maintenance organization in meeting functional and company objectives. The main duties are listed below, but include an overarching responsibility to ensure the company and all Maintenance staff adherence to the U.S. Federal Aviation Agency (FAA) regulatory requirements. Located at our US HQ in Mesa, AZ.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Setting Maintenance and Logistics function policies
Ensuring zero preventable flight safety incidents
Promote and support Flight Safety, OHS and Quality Management Systems and in being compliant to any related regulations.
Full compliance to FAA and other airworthiness authorities
Ensuring fleet maintains less than 2% mission loss due to maintenance
Comply to all duties as described in the Company Maintenance Control Policy Manual
Ensuring continuous improvements
Implementing corrective action plans
Management of staff and performance based setting of objectives
Participate in senior management reviews, providing expert opinion and technical support
Financial and Budget forecasting for department
Coordinating with HR the hiring of staff required
You will have the following responsibilities in order to comply with the company's Occupational Health and Safety program. As a Manager/Supervisor, you are responsible for:
o Providing a safe and healthy workplace including the necessary equipment, systems, and tools which are properly maintained
o Providing information, training, instruction and supervision to protect the Occupational Health and Safety of Employees
o Ensuring Employees under their direction know and comply with Occupational Health and Safety requirements
o Ensuring Employees under their direction receive adequate supervision.
o Establishing, supporting, and consulting with Occupational Health and Safety committees and Workplace Occupational Health and Safety representatives on all matters to improve workplace Occupational Health and Safety including regular safety inspections of the workplace.
Must be able to work under pressure and meet deadlines, while maintaining a positive attitude and providing exemplary customer service.
Ability to work independently and to carry out assignments to completion within parameters of instructions given, prescribed routines, and standard accepted practices.
Perform related duties as assigned by supervisor.
Maintain compliance with all company policies and procedures.
SKILLS AND/OR QUALIFICATIONS:
Knowledge of Project Management, Supervision of Aircraft Maintenance, Financial Knowledge and Budgeting Skills.
Familiarity of Airworthiness processes with US Armed Forces and FAA, as well as, Security Management and ITAR regulations.
General knowledge of business operations and local legislation. Financial Statements and Budgeting.
Knowledge of US Government contractual process and associated regulations.
Strong Managerial experience overseeing large teams.
Strong communicator who disseminates and obtains information with discretion, professionalism, and diplomacy.
Excellent verbal and written communication skills, including ability to effectively communicate with internal and external customers.
Excellent computer proficiency (MS Office - Word, Excel and Outlook).
The ability to effectively work with all levels of staff and management, with a demonstrated ability to drive consensus across different functional teams
Strong talent management and team development skills
Excellent planning and problem-solving skills, and the ability to resolve issues effectively and efficiently
Ability to travel
Ability to perform all work in support of our Corporate Values of Safety, Teamwork, Focus, Innovation and Integrity
Demonstrates strong and visible support of our values
CERTIFICATIONS, LICENSES, REGISTRATIONS:
None Required.
EDUCATION AND/OR WORK EXPERIENCE:
SPECIAL WORK CONDITIONS:
Applicants selected may be subject to a Government security investigation and must meet the eligibility requirements to be cleared for and to gain access to applicable classified information. Eligibility requirements include U.S. nationals or permanent residents (Green Card).
This description has been designed to indicate the general nature and level of work being performed by employees working in this position and within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job.
Top Aces Corp. is an equal opportunity employer and values diversity. All employment and personnel related decisions are decided solely on the basis of qualifications, merit, performance and business need.