ZipRecruiter

Log In

1

Soldering Crimping Jobs (NOW HIRING)

Tri-Tech Electronics, Inc.

Assembler

Orlando, FL · On-site

$15 - $16/hr

Duties include following written instructions for soldering, crimping, lacing, wiring, and potting tasks. Essential Job Duties and Responsibilities: * Master the skills outlined in Tri-Tech ...

Tri-Tech Electronics, Inc.

Assembler

Orlando, FL

$15 - $16/hr

Duties include following written instructions for soldering, crimping, lacing, wiring, and potting tasks. Essential Job Duties and Responsibilities: * Master the skills outlined in Tri-Tech ...

Openwork, LLC

Cable Assembler

Kyle, TX

$20 - $25/hr

Performing soldering, crimping, and splicing in compliance with J-STD-001 standards * Using hand tools and specialized equipment for cable assembly, including wire strippers, heat guns, and ...

Actalent

Mechanical Technician

Littleton, CO

Perform soldering, crimping, and harness builds, including fabrication of wire harnesses and connectors for spacecraft systems. * Install project-specific sensors such as thermistors and ...

New

AmeriTech Staffing, Inc.

Be Seen First

Electrical Assembler

Stafford, TX · On-site

$18 - $20/hr

Perform soldering, crimping, and wire termination as required * Drill, mount, and fasten components to panels and enclosures * Conduct continuity checks and basic electrical testing * Inspect ...

New

Adecco

Electrical Assembly Soldering

Stacy, MN

$22 - $24/hr

Assemble circuit boards and electronic systems; install components, units, subassemblies, wiring, or assembly casings, using soldering, crimping, hardware and other tools/equipment so they work as ...

On Target Staffing

Be Seen First

Assembler

Chandler, AZ · On-site

$17/hr

Perform basic soldering, crimping, and cable routing * Inspect and test assemblies for quality and functionality * Maintain a clean and organized work area Qualifications * Previous assembly or ...

next page

Showing results 1-20

All JobsSoldering Crimping Jobs

Soldering Crimping information

See salary details

$12

$20

$28

How much do soldering crimping jobs pay per hour?

As of Jun 14, 2026, the average hourly pay for soldering crimping in the United States is $20.44, according to ZipRecruiter salary data. Most workers in this role earn between $17.55 and $22.12 per hour, depending on experience, location, and employer.

What are the key skills and qualifications needed to thrive as a Soldering and Crimping Technician, and why are they important?

To thrive as a Soldering and Crimping Technician, you need proficiency in manual dexterity, attention to detail, and a foundational understanding of electronics and wiring, often supported by a high school diploma or technical training. Familiarity with soldering irons, crimping tools, multimeters, and the ability to read technical schematics are typically required, and certifications like IPC-A-610 or J-STD-001 can be advantageous. Strong hand-eye coordination, patience, and effective communication skills distinguish top performers in this role. These skills ensure high-quality, reliable electrical connections, which are critical for safety and performance in electronic assemblies.

What are soldering and crimping in electronics?

Soldering and crimping are two common techniques used to join electrical wires and components. Soldering involves melting a metal alloy (solder) to create a permanent, conductive connection between wires or electronic parts. Crimping, on the other hand, uses a special tool to compress a metal connector onto a wire, creating a secure mechanical and electrical bond without the need for heat. Both methods are essential in electronics manufacturing and repair, with soldering offering a more permanent solution and crimping being faster and often more suitable for field or modular work.

What is the difference between Soldering Crimping vs Soldering Crimping?

AspectSoldering Crimping
Skills RequiredElectrical wiring, soldering, crimping techniques
CertificationsElectronics or electrical certifications often preferred
Work EnvironmentManufacturing plants, electronics assembly lines
Tools UsedSoldering irons, crimping tools, wire strippers

Both roles involve working with electrical components, requiring similar certifications and tools. Soldering Crimping specialists focus on connecting wires through soldering and crimping techniques, often in electronics manufacturing. The primary difference lies in the specific tasks: soldering involves melting solder to join components, while crimping uses mechanical connectors. Understanding these distinctions helps employers and workers identify the right skills for each role.

Can I make a career out of soldering?

Soldering is a key skill in careers such as electronics assembly, manufacturing, and electrical work. Professionals in these fields often advance by gaining certifications, experience with specialized tools, and understanding safety protocols, making soldering a viable career path with opportunities for growth.

What are some common challenges faced by Soldering Crimping technicians, and how can they be addressed on the job?

Soldering Crimping technicians often encounter challenges such as maintaining consistent quality under time constraints, working with small or delicate components, and ensuring reliable electrical connections. These can be addressed by following strict quality control procedures, staying organized, and using the correct tools and techniques for each task. Regular training and collaboration with quality assurance teams also help technicians stay updated on best practices and improve their skills, leading to fewer errors and more efficient work.

Does soldering make money?

Soldering is a skill used in various trades such as electronics and manufacturing, and professionals who specialize in soldering can earn a competitive wage. Income depends on experience, certifications, and the industry, with many soldering jobs offering steady employment and opportunities for advancement. Crimping skills often complement soldering in electrical work, potentially increasing earning potential.

How much do people who solder make?

Soldering and crimping technicians typically earn between $30,000 and $50,000 annually, depending on experience, location, and industry. Skilled workers with certifications and experience in electronics or manufacturing may earn higher wages and have opportunities for advancement.

Is soldering certification worth it?

For soldering and crimping jobs, certification can demonstrate proficiency and may improve employment prospects, especially in industries with strict quality standards. While not always mandatory, having a certification can validate skills and potentially lead to higher pay or more advanced positions.
More about Soldering Crimping jobs
What cities are hiring for Soldering Crimping jobs? Cities with the most Soldering Crimping job openings:
What states have the most Soldering Crimping jobs? States with the most job openings for Soldering Crimping jobs include:
What job categories do people searching Soldering Crimping jobs look for? The top searched job categories for Soldering Crimping jobs are:
Soldering Crimping jobs near you
Infographic showing various Soldering Crimping job openings in the United States as of June 2026, with employment types broken down into 99% Full Time, and 1% Contract. Highlights an 100% Physical job distribution, with an average salary of $42,519 per year, or $20.4 per hour.
Wire and Soldering Technician

Wire and Soldering Technician

C4 Advanced Tactical Systems

Orlando, FL • On-site

$16.75 - $21/hr

Full-time

Medical, Dental, Retirement, PTO

Posted 10 days ago

Job description

C4 Advanced Tactical Systems, LLC (CATS) is a certified Build to Print, U.S. manufacturer specializing in complex and precision products. We provide many services including manufacturing, integration/testing, environmental testing, quality assurance, and logistics services.
Our primary focus is on quality and customer satisfaction. We are ITAR compliant and welcome FMF contracts and pass-through procurement for U.S. origin products.
CATS 90,000 square foot modern facility is in Central Florida, minutes from Orlando International Airport. Our facility includes a spacious office area, five production clean rooms, high-bay area and ERP integrated warehouse.
If you're a passionate self-starter, CATS is a great place to get ahead. Apply today!
Job Summary
  • Utilizing proper tools, equipment and processes to assemble, soldier, and crimp wired electronic components by following instructions and processes described in various forms of documentation and quality specifications.
  • Must have the ability to conduct:
    • Wiring assembly
    • Limited testing
    • Troubleshooting
    • Inspect

Essential Duties and Responsibilities
  • Assemble components into housing/s & sub-assemblies making required interconnections using soldering, crimping, and other techniques as specified, working to Class 3 workmanship standards. IPC J-STD-001
  • Fabricate cable assemblies using soldering, crimping, and other techniques as required to IPC-A-610 & IPC/WHMA-A- 620 standards.
  • Soldering wires of 32AWG under a microscope, as required.
  • Assembling products or sub-assemblies in a clean room manufacturing environment, according to verbal or written instructions or following drawings, and/or predefined assembly procedures.
  • Working to very tight tolerances on assembled parts.
  • Operate hand tools, power tools, and/or production equipment to include manual and automated testing.
  • Read and interpret blueprints and schematics.
  • Accurately record as-built information, traceability requirements, labor hours, and other statistics into computer databases to comply with customer requirements.
  • Assist other technicians/teammates, as required, with assembly processes and tasks
  • Support other activities as assigned by Production Manager.

Education and/or Experience
  • AS degree (preferred) or other formal education in electronics.
  • Minimum of 5 years of Wiring and Soldering experience
  • Must have Certification in high reliability electronic assembly processes, per J-STD-001, IPC-A-610 & IPC/WHMA-A-620.

Basic Employment Requirements
  • Excellent communication skills, self-motivated, capable of multitasking and high attention to detail.
  • Ability to interpret various forms of assembly documentation.
  • Ability to handle materials safely and lift up to 20 lbs.
  • Must be authorized to work in the US and be eligible to obtain a passport.
  • Must be able to work over-time as needed.

Work Environment/Corporate Culture
  • The work environment is one of a professional office.
  • 9/80 Work schedule or as assigned by Production Manager.
  • Full benefits package including medical, dental, STD, LTD, GTL, 401K, Holidays, Vacation, paid time off to eligible employees.
  • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

C4 Advanced Tactical Systems, LLC. is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status
  • Must pass Security background screening process.

Apply