ZipRecruiter

Log In

1

Qfn Jobs (NOW HIRING)

Epiq Solutions

SMT Rework Lead

Mount Airy, MD · On-site

$70K - $90K/yr

Conduct BGA/QFN/QFP component removal and replacement using rework equipment. * Interpret schematics, assembly drawings, BOMs, ECOs, and work instructions. * Support failure analysis and root cause ...

Vadatech Inc

Soldering Specialist

Henderson, NV · On-site

$17 - $21.50/hr

Perform advanced rework, repair, and modifications on complex surface-mount and through-hole electronic assemblies including BGA, QFN and other high-density components, while ensuring minimal thermal ...

VadaTech

Soldering Specialist

Henderson, NV · On-site

$17 - $21.50/hr

Perform advanced rework, repair, and modifications on complex surface-mount and through-hole electronic assemblies including BGA, QFN and other high-density components, while ensuring minimal thermal ...

Vadatech Inc

Soldering Specialist

Henderson, NV · On-site

$17 - $21.50/hr

Perform advanced rework, repair, and modifications on complex surface-mount and through-hole electronic assemblies including BGA, QFN and other high-density components, while ensuring minimal thermal ...

Pronto.ai, Inc.

PCB Technician

San Francisco, CA · On-site

We require self-driven applicants with a strong attention to detail, and experience with reliably reworking challenging SMT components including QFN parts and exposed pads. Work is split roughly ...

Avant Technology

Be Seen First

SMT Rework Technician

Pflugerville, TX · On-site

$16 - $18/hr

Handling advanced rework for fine-pitch components like BGA (Ball Grid Array), QFN (Quad Flat No-Lead), and CSP (Chip Scale Packages). Defect Repair: Troubleshooting, repairing, and modifying PCBA ...

PDS Tech Commercial

Assembler -21797-1

Oldsmar, FL

$24/hr

Perform BGA reballing and replacement , QFN rework, and high-density connector repairs * Replace and repair SMT and through-hole components , including fine-pitch parts * Utilize hand and reflow ...

Chipton Ross Inc.

Solderer

Oldsmar, FL · On-site

$23 - $26/hr

POSITION RESPONSIBILITIES: • Perform manual and/or selective soldering of through hole, surface mount (SMT), BGA, QFN, CSP, and other component types. • Conduct visual inspections and use ...

Aerotek

Micro Soldering Technician

San Jose, CA

$35 - $50/hr

Solid knowledge of component packages such as SMD, QFN, LGA, and BGA, including their handling and rework requirements. Additional Skills & Qualifications * Experience executing advanced micro ...

next page

Showing results 1-20

All JobsQfn Jobs

Qfn information

See salary details

$37K

$79.5K

$112K

How much do qfn jobs pay per year?

As of Jun 22, 2026, the average yearly pay for qfn in the United States is $79,480.00, according to ZipRecruiter salary data. Most workers in this role earn between $60,000.00 and $92,000.00 per year, depending on experience, location, and employer.

What jobs pay $10,000 a month without a degree?

Jobs related to manufacturing or electronics, such as working with QFN (Quad Flat No-Lead) packages in electronics assembly or testing, can sometimes pay high wages without requiring a degree, especially with specialized skills or certifications. High-paying roles in sales, real estate, or skilled trades like electrical work may also reach or exceed $10,000 monthly, often based on experience, performance, and market demand.

What jobs pay 2000 a day?

High-paying jobs that can pay around $2,000 a day typically include specialized roles such as surgeons, anesthesiologists, corporate lawyers, and senior executives. These positions often require advanced education, extensive experience, and professional certifications, and may involve high-stakes environments or demanding schedules.

What are the key skills and qualifications needed to thrive as a QFN Process Engineer, and why are they important?

To thrive as a QFN Process Engineer, you need a solid background in materials science, semiconductor manufacturing processes, and quality control, typically supported by an engineering degree in a related field. Experience with equipment such as wire bonders, die attach machines, and statistical process control (SPC) software is often required. Strong problem-solving skills, attention to detail, and effective communication are essential soft skills for collaborating with cross-functional teams and resolving production issues. These skills ensure efficient production, high product quality, and continuous improvement in the fast-paced semiconductor packaging environment.

What is the difference between Qfn vs PCB Designer?

AspectQfnPCB Designer
Required credentialsTechnical certifications, electronics knowledgeElectrical engineering or related degree, CAD software skills
Work environmentElectronics manufacturing, assembly linesDesign offices, engineering teams
Industry usageElectronics manufacturing, component assemblyElectronics, telecommunications, consumer devices
Common search intentUnderstanding manufacturing roles, component assemblyDesigning PCBs, layout, and schematic work

Qfn (Quad Flat No-Lead) refers to a type of surface-mount package for integrated circuits, while PCB Designer focuses on creating printed circuit board layouts. The two roles are related but serve different functions: Qfn pertains to specific component packaging, whereas PCB Designer involves designing the entire circuit board that may include Qfn components. Both roles require electronics knowledge and often overlap in electronics manufacturing and design industries.

What is the 3 month rule for jobs?

The 3 month rule for jobs generally refers to a probationary period, often lasting three months, during which an employer evaluates a new employee's performance and fit for the role. For positions like QFN (qualified financial nurse) or similar roles, this period may be used to assess skills, compliance with protocols, and adaptability before confirming permanent employment or benefits. It is common for employers to set this timeframe to ensure mutual suitability before full integration into the team.

What are QFN packages?

QFN stands for Quad Flat No-lead, which is a type of surface-mount integrated circuit package. QFN packages are small, lightweight, and have no leads extending from the sides, making them ideal for applications where space and thermal performance are important. They feature a flat, exposed pad on the bottom for improved heat dissipation and electrical grounding. QFN packages are commonly used in consumer electronics, automotive systems, and communication devices.

Is QC a high paying job?

Quality Control (QC) jobs can offer competitive wages depending on the industry, location, and level of experience. Entry-level QC positions typically pay around minimum wage or slightly above, while experienced QC inspectors or managers can earn higher salaries, especially with certifications or specialized skills. Overall, QC roles are generally considered moderate in pay compared to other technical or managerial positions.

What are some common challenges faced by professionals working with QFN (Quad Flat No-Lead) packages in electronics manufacturing?

Professionals working with QFN packages often encounter challenges related to soldering and inspection due to the package's leadless design and exposed thermal pad. Ensuring reliable solder joints can be complex, as the connections are located underneath the component and are not visible after placement, making process control and X-ray inspection critical. Additionally, achieving proper thermal management and preventing voids during reflow soldering require attention to paste application and reflow profiles. Close collaboration with PCB designers, process engineers, and quality assurance teams is essential to address these challenges and ensure high assembly yields.
More about Qfn jobs
What cities are hiring for Qfn jobs? Cities with the most Qfn job openings:
What states have the most Qfn jobs? States with the most job openings for Qfn jobs include:
What job categories do people searching Qfn jobs look for? The top searched job categories for Qfn jobs are:
Qfn jobs near you
Infographic showing various Qfn job openings in the United States as of June 2026, with employment types broken down into 93% Full Time, 4% Contract, and 3% Nights. Highlights an 89% Physical, 8% Hybrid, and 3% Remote job distribution, with an average salary of $79,480 per year, or $38.2 per hour.
SMT Rework Lead

SMT Rework Lead

Epiq Solutions

Mount Airy, MD • On-site

$70K - $90K/yr

Full-time

Posted yesterday

Job description

Job Type
Full-time
Description
The SMT Rework Lead is responsible for leading daily rework and repair operations within a high-mix RF electronics manufacturing environment. This role combines hands-on technical repair work with leadership responsibilities to ensure product quality, throughput, schedule adherence, and continuous improvement across the rework area.
The ideal candidate is an experienced electronics technician with strong SMT/BGA rework capability, leadership presence, and the ability to balance production demands with quality expectations in a fast-paced manufacturing setting.
RESPONSIBILITIES
Job responsibilities include, but are not limited to:
Leadership & Team Oversight
  • Lead and coordinate daily activities of the SMT rework team.
  • Assign work based on production and engineering priorities, technician skill levels, and customer deadlines.
  • Provide technical guidance, coaching, and training to rework technicians.
  • Monitor team performance, productivity, workmanship, and adherence to procedures.
  • Support hiring, onboarding, cross-training, and performance feedback efforts.
  • Promote a culture of accountability, quality, urgency, and continuous improvement.

Technical Rework & Repair
  • Perform complex SMT and through-hole rework and repair on RF electronic assemblies and PCAs.
  • Conduct BGA/QFN/QFP component removal and replacement using rework equipment.
  • Interpret schematics, assembly drawings, BOMs, ECOs, and work instructions.
  • Support failure analysis and root cause investigations alongside Quality and Engineering teams.
  • Verify workmanship to IPC standards and internal customer requirements.

Production & Throughput Support
  • Support daily production goals by maintaining efficient repair turnaround times.
  • Escalate material shortages, tooling issues, or process bottlenecks impacting flow.
  • Track and communicate rework status, aging jobs, and repair metrics.
  • Ensure proper documentation of repairs, defects, and disposition activities in ERP/MES systems.

Quality & Compliance
  • Ensure all work complies with IPC-A-610, J-STD-001, ESD and company workmanship standards.
  • Maintain accurate repair records and defect tracking documentation.
  • Drive reduction of repeat defects and rework trends through corrective action participation.
  • Support audits, customer inspections, and process validation activities, as required.

Continuous Improvement
  • Identify opportunities to improve repair processes, tooling, fixtures, and workflow efficiency.
  • Recommend process improvements to reduce defects and increase first-pass yield.
  • Assist in development and refinement of rework procedures and visual aids.
  • Support Lean manufacturing and 5S initiatives withing the work area.

Requirements
SKILLS, EXPERIENCE & EDUCATION
  • Required job skills, experience and education include:
  • High school diploma or GED required
  • 5+ years of SMT rework/repair experience in electronics manufacturing
  • 2+ years of leadership, lead, or mentoring experience
  • Strong hands-on experience with SMT, fine-pitch, BGA, QFN, and RF PCB assemblies
  • Ability to read schematics, assembly drawings, and technical documentation
  • Experience using microscopes, soldering stations, hot air systems, and BGA rework equipment
  • Knowledge of IPC-A-610 and J-STD-001 standards
  • Familiarity with ESD handling requirements and controlled manufacturing environments
  • Strong organizational, communication, and troubleshooting skills
  • Preferred job skills, experience and education include:
  • Technical degree or electronics certification
  • IPC-A-610 and/or J-STD-001 certification(s)
  • Experience in RF, defense, aerospace, telecommunications, or high-reliability electronics manufacturing
  • Familiarity with ERP/MRP or MES systems
  • Experience supporting Lean manufacturing initiatives

WORK ENVIRONMENT & PHYSICAL REQUIREMENTS
  • Climate-controlled electronics manufacturing environment
  • Exposure to soldering fumes, ESD-controlled areas, and precision manufacturing equipment
  • Fast-paced production environment with shifting priorities and schedule-driven deadlines
  • Ability to sit or stand for extended periods
  • Ability to work under microscope magnification for prolonged periods
  • Frequent use of hands for fine motor soldering and assembly tasks
  • Ability to occasionally lift up to 25 lbs.

Salary Description
$70,000 to $90,000 per year

Apply