ZipRecruiter

Log In

1

Permanent Combat Designer Jobs (NOW HIRING)

US Department of the Army

$36.74/hr

Permanent Change of Station (PCS) costs, MAY be authorized. Authorization for payment of PCS ... of combat, tactical, commercial, special purpose vehicles, and equipment. Ability to diagnose ...

US Department of the Army

$36.74/hr

Permanent Change of Station (PCS) costs, MAY be authorized. Authorization for payment of PCS ... of combat, tactical, commercial, special purpose vehicles, and equipment; ability to diagnose ...

US Department of the Army

$36.74/hr

Permanent Change of Station (PCS) costs, MAY be authorized. Authorization for payment of PCS ... of combat, tactical, commercial, special purpose vehicles, and equipment. Ability to diagnose ...

Sentradel

Mechanical Engineer

San Francisco, CA · On-site

$105K - $170K/yr

About Sentradel Over 90 percent of combat deaths in Ukraine are caused by small drones. In Colombia ... designed to defeat Group 1 (small FPV drones) and low flying Group 2 drone threats. We have shot ...

HX5 LLC

Electrical Engineer

Ogden, UT · On-site

Army, Navy, Pacific Air Forces, Air Combat Command (ACC), Air Force Materiel Command (AFMC), and ... Citizenship or US Permanent Residency is a requirement for this position. * Must be able to ...

Sentradel

Guidance and Controls Engineer

San Francisco, CA · On-site

$120K - $190K/yr

About Sentradel Over 90 percent of combat deaths in Ukraine are caused by small drones. In Colombia ... designed to defeat Group 1 (small FPV drones) and low flying Group 2 drone threats. We have shot ...

Sentradel

Electrical Engineer

San Francisco, CA · On-site

$110K - $170K/yr

About Sentradel Over 90 percent of combat deaths in Ukraine are caused by small drones. In Colombia ... designed to defeat Group 1 (small FPV drones) and low flying Group 2 drone threats. We have shot ...

Analog Devices

Staff Wireless IC Digital Designer

Dallas, TX · On-site

$134K/yr

ADI combines analog, digital, AI, and software technologies into solutions that combat climate ... As such, applicants for this position - except US Citizens, US Permanent Residents, and protected ...

Sentradel

Head of Manufacturing

San Francisco, CA · On-site

$120K - $220K/yr

About Sentradel Over 90 percent of combat deaths in Ukraine are caused by small drones. In Colombia ... designed to defeat Group 1 (small FPV drones) and low flying Group 2 drone threats. We have shot ...

next page

Showing results 1-20

All JobsPermanent Combat Designer Jobs

Permanent Combat Designer information

See salary details

$21.5K

$65.4K

$112K

How much do permanent combat designer jobs pay per year?

As of Aug 1, 2026, the average yearly pay for permanent combat designer in the United States is $65,444.00, according to ZipRecruiter salary data. Most workers in this role earn between $42,500.00 and $85,000.00 per year, depending on experience, location, and employer.
What cities are hiring for Permanent Combat Designer jobs? Cities with the most Permanent Combat Designer job openings:
What are the most commonly searched types of Combat Designer jobs? The most popular types of Combat Designer jobs are:
What states have the most Permanent Combat Designer jobs? States with the most job openings for Permanent Combat Designer jobs include:
Permanent Combat Designer jobs near you

Electrical Engineer II

Combat Mobility Solutions

Muskegon, MI • On-site

Full-time

Re-posted 14 days ago

Job description

About the Organization
RENK America is a leading supplier in the defense, marine and industry sector with superior mobility, propulsion and drive train solutions. Our tradition is centered on precision-engineered systems for maximum impact, efficiency and endurance. RENK's ambition is to support each and every one of its customers to exceed standards in harsh conditions and combat situations. RENK America employs over 500 employees at our US locations in Muskegon, Michigan, Cincinnati, Ohio, Camby, Indiana and Roseville, Michigan. RENK America is driven by this sense of pride and purpose in our country and our community.
Description
The Transmission Electrical Engineer will be responsible for the design of transmission electronics and software for military ground vehicles including tanks, howitzers, and infantry fighting vehicles. Projects will include the full scope of product development including research, design, prototyping, and testing of functional improvements. This engineer will report to the Manager of Transmission Engineering and will perform their job duties with the oversight of a Project Engineer.
Essential Functions:
  • Responsible for electrical systems design, analysis, integration, and performance evaluation in combat vehicle applications. This includes FPGA, PCB, harnesses, enclosures, controllers, sensors, motor/generators, inverters, and effectors.
  • Support development of hybrid power packs including designing, testing, and integrating the electrical components that combine internal combustion engines with electric propulsion, including battery packs, inverters, and electric motors.
  • Develop controller architecture design plans by researching, analyzing, selecting, and applying powertrain control engineering techniques and criteria. This involves circuit design including parameters, stability, bandwidth, noise, parasitic effects, impedances, high-frequency behavior, filters, and EMI compatibility.
  • Develop & release detailed design specifications including CAD models, schematics, and drawings for qualification and production release using Engineering Change Proposals (ECPs).
  • Work in a cross-functional environment including interfacing with program management, project engineering, test engineering, analysts, designers, and mechanical engineering. Also includes interfacing with customers and suppliers.
  • Compose design verification test plans that capture all performance data to assess new design requirements compliance. Oversee qualification activities including HIL/SIL, bench, dynamometer, and vehicle level testing.
  • Participate in root cause failure analysis investigations on electronic and electro-mechanical systems.
  • Analyzes electrical and software requirements to determine feasibility of design within time and cost constraints.
  • Prepares electrical design reports by collecting, analyzing, and summarizing data and trends.
  • Supports investigations involving the origination or modification of electronic components, firmware, or software specifications and requirements.
  • Maintain existing product design including support of technical data packaged (TDP), production and supply chain support.

Position Requirements
Minimum Qualifications:
  • Bachelor of Science (BS) in Electrical Engineering from an accredited university required with 2-8 years of relevant experience.
  • Ability to perform engineering calculations such as power analysis, wire gage and trace size, & Spice analysis.
  • General knowledge of electrical systems, circuit board design, harnesses, and components up to 1000V.
  • Knowledge of MIL-Standards, IEEE documentation, SAE specs, and IPC.
  • Skilled in the design of rigid and flex Printed Circuit Boards (PCB)
  • The ability to create and read schematics, assembly drawings and wire harness prints.
  • Schematic capture and PCB layout for multi-layer boards using Altium.
  • Problem solving and troubleshooting skills, including the ability to participate in or lead failure analysis investigations.
  • Ability to make technical decisions, complete assignments within budget and schedule, and work with minimal supervision.
  • Ability to manage and organize multiple project tasks to meet established deadlines, including tracking metrics and reporting status of engineering activities.
  • Excellent written and verbal communications.
  • Ability to utilize all Microsoft Office applications including Word, Excel, PowerPoint, Project, and Visio.
  • Must be willing to travel (domestic and foreign) up to 10%.
  • Must be able to move freely, with or without reasonable accommodation, throughout a manufacturing environment.
  • Must be capable of obtaining a DOD security clearance if necessary for the program.

Preferred Additional Skills:
  • Previous experience with vehicle electric and/or hybrid electric powertrain components and concepts such as:
    • Permanent magnet motors/generators
    • High Voltage inverters/converters
    • Powertrain control systems
    • Integration into a vehicle and performance evaluation
  • MS in Electrical or Software Engineering (or other advanced degree).
  • Systems engineering experience.
  • Hybrid electric vehicle or powertrain experience.
  • Creo or other CAD modeling software experience.
  • Manufacturing or assembly line experience.
  • Fluent in German or French, or other languages.
  • Understanding of bill of materials and processes to develop them.
  • Root cause failure analysis training such as 6 sigma, 8D, Shainin Red X, etc.
  • Circuit card and harness design exposure including IPC training or certification.
  • Proficient in engineering software such as LTSpice, Vector CANalyzer/CANape, MATLAB Simulink, LabView.
  • Experience in an aerospace/military manufacturing environment with SMT, complex assembly, and product test.

RENK America is an Equal Opportunity Employer including Veterans/Disability
Full-Time/Part-Time
Full-Time
Exempt/Non-Exempt
Exempt
EOE Statement
RENK America is proud to be an Affirmative Action/Equal Opportunity Employer. RENK America is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. RENK America maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
This position is currently accepting applications.

Apply