ZipRecruiter

Log In

1

Mechanical Inspector Jobs in Houston, TX (NOW HIRING)

Verify

Mechanical Inspector

Pearland, TX

$22.50 - $29.75/hr

We are seeking a Quality Source Inspector with expertise in electrical and mechanical commodity products, including but not limited to Circuit Card Assemblies (CCA), Printed Wiring Board Circuit Card ...

Verify

Mechanical Inspector

Pearland, TX

$22.50 - $29.75/hr

We are seeking a Quality Source Inspector with expertise in electrical and mechanical commodity products, including but not limited to Circuit Card Assemblies (CCA), Printed Wiring Board Circuit Card ...

Verify Inc.

Mechanical Inspector

Pearland, TX

$22.50 - $29.75/hr

We are seeking a Quality Source Inspector with expertise in electrical and mechanical commodity products, including but not limited to Circuit Card Assemblies (CCA), Printed Wiring Board Circuit Card ...

City of Houston, TX

Inspector (Mechanical)

Houston, TX · On-site

$25.19 - $33.70/hr

Performs mechanical Inspections, identifies problem areas with mechanical systems, serves correction notices and recommends solutions based on applicable mechanical codes and ordinances. Meets with ...

City of Houston

Inspector (Mechanical)

Houston, TX

$25.19 - $875/hr

Performs mechanical Inspections, identifies problem areas with mechanical systems, serves correction notices and recommends solutions based on applicable mechanical codes and ordinances. Meets with ...

next page

Showing results 1-20

All JobsMechanical Inspector JobsMechanical Inspector Jobs in Houston, TX

Mechanical Inspector information

See Houston, TX salary details

$15

$27

$42

How much do mechanical inspector jobs pay per hour?

As of Aug 3, 2026, the average hourly pay for mechanical inspector in Houston, TX is $27.99, according to ZipRecruiter salary data. Most workers in this role earn between $23.17 and $30.77 per hour, depending on experience, location, and employer.

How much do inspectors make per inspection?

Mechanical inspectors typically do not get paid per inspection but earn an hourly or salary wage, which can range from $20 to $40 per hour depending on experience, location, and industry. Some inspectors may receive bonuses or overtime pay for additional hours worked or specialized certifications.

What are the key skills and qualifications needed to thrive as a Mechanical Inspector, and why are they important?

To thrive as a Mechanical Inspector, you need a solid understanding of mechanical systems, blueprint reading, and quality assurance principles, typically supported by a relevant technical degree or certification. Familiarity with inspection tools, measurement devices, and standards such as ASME or ISO is commonly required. Attention to detail, problem-solving ability, and effective communication are standout soft skills in this role. These competencies are crucial for ensuring that mechanical components meet safety, reliability, and regulatory standards in various industries.

What are some common challenges Mechanical Inspectors face when working on large-scale projects?

Mechanical Inspectors working on large-scale projects often encounter challenges such as coordinating inspections across multiple teams, ensuring compliance with strict safety and quality standards, and managing tight deadlines. They must frequently review complex technical drawings and specifications, requiring strong attention to detail and effective communication with engineers, contractors, and project managers. Adapting to changing project scopes and resolving discrepancies quickly are essential for maintaining project timelines and quality.

What is the role of a mechanical inspector?

A mechanical inspector is responsible for examining machinery, equipment, and components to ensure they meet safety standards, specifications, and quality requirements. They perform inspections using tools like calipers and gauges, review technical drawings, and may hold certifications such as ASNT or API. Their work helps prevent equipment failures and ensures compliance with industry regulations.

How do you become a mechanical inspector?

To become a mechanical inspector, candidates typically need a high school diploma or equivalent, along with relevant experience in mechanical work or inspection. Many employers prefer candidates to have certifications such as the Certified Mechanical Inspector (CMI) or similar credentials, and knowledge of industry standards and tools like calipers and gauges is essential.

What is the difference between Mechanical Inspector vs Mechanical Technician?

AspectMechanical InspectorMechanical Technician
CertificationsASNT, API, or equivalent quality assurance certificationsTechnical diplomas or certifications in mechanical systems
Work EnvironmentInspection sites, quality control labs, manufacturing facilitiesMaintenance workshops, installation sites, repair facilities
Primary ResponsibilitiesInspect and verify mechanical components meet standardsInstall, maintain, and repair mechanical systems

Mechanical Inspectors focus on quality assurance and compliance through inspections, while Mechanical Technicians handle installation, maintenance, and repairs. Both roles often work in manufacturing or industrial settings and may require similar certifications, but their core duties differ significantly.

What type of inspectors make the most money?

Senior or specialized mechanical inspectors, such as those with advanced certifications like ASNT or API, tend to earn higher salaries. Inspectors working in high-demand industries like oil and gas, aerospace, or manufacturing often have higher pay due to the complexity and safety requirements of their work.

What does a Mechanical Inspector do?

A Mechanical Inspector is responsible for examining and testing mechanical systems, equipment, and installations to ensure they meet safety standards, codes, and regulations. Their duties often include reviewing blueprints, conducting on-site inspections, documenting findings, and recommending corrective actions if any deficiencies are found. Mechanical Inspectors work in a variety of industries, such as construction, manufacturing, and facilities maintenance, to help ensure that machinery and systems operate safely and efficiently.

What Does a Mechanical Inspector Do?

A mechanical inspector performs a variety of quality assurance duties related to building codes and electrical maintenance. Your responsibilities include inspecting the installation and upkeep of all kinds of electrical and mechanical systems, such as furnaces, boilers, HVAC or air conditioning systems, and elevators in residential and commercial buildings. You inspect these systems to ensure they are functioning properly and do not violate any building or safety codes. You may work on construction sites to observe the installation and technical calibration of systems, or for existing buildings to write reports based on your inspections.

More about Mechanical Inspector jobs
What are the most commonly searched types of Mechanical Inspector jobs in Houston, TX? The most popular types of Mechanical Inspector jobs in Houston, TX are:
What are popular job titles related to Mechanical Inspector jobs in Houston, TX? For Mechanical Inspector jobs in Houston, TX, the most frequently searched job titles are:
What job categories do people searching Mechanical Inspector jobs in Houston, TX look for? The top searched job categories for Mechanical Inspector jobs in Houston, TX are:
What cities near Houston, TX are hiring for Mechanical Inspector jobs? Cities near Houston, TX with the most Mechanical Inspector job openings:
Mechanical Inspector jobs near you
Infographic showing various Mechanical Inspector job openings in Houston, TX as of July 2026, with employment types broken down into 88% Full Time, 8% Part Time, 3% Contract, and 1% Nights. Highlights an 99% Physical, and 1% Remote job distribution, with an average salary of $58,241 per year, or $28 per hour.

Mechanical Inspector

Verify

Pearland, TX

$22.50 - $29.75/hr

Full-time

Posted 11 days ago

Job description

Overview

Industry: Aerospace/Defense

Position: Source Inspector

Location: Pearland, TX

Schedule: 2 visits per month

Duration: On-going contract

Position Summary:

We are seeking a Quality Source Inspector with expertise in electrical and mechanical commodity products, including but not limited to Circuit Card Assemblies (CCA), Printed Wiring Board Circuit Card Assemblies (PWBCCA), cable and wire assemblies. This role involves performing inspections at multiple supplier locations to ensure compliance with industry standards and customer requirements. Candidates must possess a strong attention to detail, excellent technical skills, and the ability to document inspection results effectively.

Key Responsibilities:

    • Conduct inspections on electrical and mechanical commodity products, including CCA, PWBCCA, and cable/wire assemblies, ensuring compliance with engineering drawings, specifications, and applicable standards.
    • Verify product conformity through dimensional checks, visual inspections, and functional tests as required.
    • Review and approve First Article Inspections (FAI) and other quality documentation.
      • Familiarity with AS9102 Rev C, preferred
    • Identify non-conformances and collaborate with suppliers to resolve
    • Utilize precision measuring tools and equipment to perform detailed inspections.
      • Familiarity with inspection methods as required per JSTD-001 and/or IPC-610 such as
        • Use of UV light - 4x magnification
        • Use of Halo lighting
        • Use of inspection tools to accurately measure keep out areas, as required. ...etc.
    • Document inspection results accurately and provide detailed reports to stakeholders.
        • Experience: Experience in quality inspection, preferably in electrical and mechanical components for aerospace or related industries.
        • Education: High school diploma or equivalent required; technical degree or certification in quality assurance, electrical engineering, or a related field preferred.
        • Skills:
          • Proficient in interpreting engineering drawings, schematics, and technical specifications.
          • Skilled in the inspection of CCAs, PWBCCAs, and cable/wire assemblies.
            • IPC 610 preferred but not required
            • JSTD-001 preferred but not required
            • Must be willing to obtain certification as required
          • Familiar with aerospace and manufacturing quality standards (AS9100, ISO 9001).
          • Strong problem-solving, organizational, and communication skills.
          • Proficient in using precision measuring tools and documentation software.
        • Other Requirements:
          • Possess a personal cell phone and be willing to use a personal laptop onsite for reporting purposes.
            • Must be computer savvy and willing to use Verify Global web based email account while representing Verify
            • Must be Proficient using Microsoft Word and Excel.
          • Willingness to work in manufacturing environments and travel to multiple supplier locations.

      Physical Requirements:

        • Ability to stand, walk, and move around manufacturing and inspection areas for extended periods.
        • Capability to lift and handle objects up to [Insert Weight] pounds as needed during inspections.
        • Fine motor skills for handling precision measuring tools and delicate components.
        • Adequate vision (with or without corrective lenses) to perform detailed inspections.
        • Ability to work in manufacturing environments, including exposure to noise, dust, and temperature variations.
        • Verify Screenings:
          • Consent for Background Check (every 4 years)
          • Consent for Drug Screening, based on program requirements
          • Completed Eye Exam based on program requirements.
Employment Type: FULL_TIME

Apply