ZipRecruiter

Log In

1

Ipc Designer Jobs (NOW HIRING)

Apex

PCB Designer / Altium Librarian

Los Angeles, CA · On-site

$124K - $170K/yr

Iterate designs based on prototype feedback, test results, and manufacturing input * Own and ... Familiarity with IPC standards (IPC-2221, IPC-7351, IPC-A-610 Class 3) * Experience with PLM ...

Northwoodspace

Senior PCB Designer

Torrance, CA · On-site

$100K - $220K/yr

Strong understanding of IPC standards (e.g., IPC-2221, IPC-7351) and commercial manufacturing ... PCB Designer/Level 3: $100,000-$125,000 PCB Designer/Level 4: $144,000-$180,000 PCB Designer/Level ...

USA Firmware

Mid-Level PCB Designer

Brecksville, OH · Hybrid

Familiarity with IPC standards * Strong communication and organizational skills Preferred * ARM Cortex-M hardware * Mixed-signal analog/digital designs * USB * Ethernet * CAN * RS-485 * SPI * IC

USA Firmware

Mid-Level PCB Designer

Brecksville, OH · On-site +1

Familiarity with IPC standards * Strong communication and organizational skills Preferred * ARM Cortex-M hardware * Mixed-signal analog/digital designs * USB * Ethernet * CAN * RS-485 * SPI * I²C

USA Firmware

Mid-Level PCB Designer

Brecksville, OH · Remote

Familiarity with IPC standards * Strong communication and organizational skills Preferred * ARM Cortex-M hardware * Mixed-signal analog/digital designs * USB * Ethernet * CAN * RS-485 * SPI * I²C

Luxus

Plumbing Designer / Engineer

Dallas, TX

$75K - $95K/yr

Plumbing Designer / Engineer (MEP) Company Name: RTM Engineering Consulting Location: Dallas, TX ... Deep familiarity with the International Plumbing Code (IPC) and International Building Code (IBC)

Luxus

Plumbing Designer / Engineer

Dallas, TX

$75K - $95K/yr

Plumbing Designer / Engineer (MEP) Company Name: RTM Engineering Consulting Location: Dallas, TX ... Deep familiarity with the International Plumbing Code (IPC) and International Building Code (IBC)

Luxus

Plumbing Designer / Engineer

Dallas, TX · On-site

$75K - $95K/yr

Plumbing Designer / Engineer (MEP) Company Name: RTM Engineering Consulting Location: Dallas, TX ... Deep familiarity with the International Plumbing Code (IPC) and International Building Code (IBC)

Judge Group, Inc.

Senior PCB Designer

Lansdale, PA · On-site

Senior PCB Designer Location: US-PA-Lansdale 6 months C2H Overview: This position is a temporary ... Specifically, IPC-2221. Working knowledge of ASME Y-14 Drawing and Dimensioning Standards.

Judit Inc

Sr. PWB Designer

Wilmington, MA

The individual should be knowledgeable in IPC standards, supplier PWB/PWA/Flex fabrication ... Allegro PWB designer experience * Create and maintain component libraries * Experienced in ...

next page

Showing results 1-20

All JobsIpc Designer Jobs

Ipc Designer information

See salary details

$40K

$100.7K

$169K

How much do ipc designer jobs pay per year?

As of Jul 23, 2026, the average yearly pay for ipc designer in the United States is $100,705.00, according to ZipRecruiter salary data. Most workers in this role earn between $75,500.00 and $120,000.00 per year, depending on experience, location, and employer.

What is the highest paid designer job?

The highest paid design roles often include senior UX/UI designers, industrial designers, and creative directors, especially in large corporations or specialized industries. These positions typically require extensive experience, advanced skills, and leadership responsibilities, with salaries reaching six figures or more in some cases.

What kind of jobs in media bring in $150,000 a year?

In media, high-paying roles such as senior media planners, media directors, or digital marketing managers can earn $150,000 or more annually. These positions typically require extensive experience, strong strategic skills, and proficiency with industry tools like media planning software and analytics platforms.

How to get a job in IC design?

To get a job as an IC designer, candidates typically need a bachelor's degree in electrical engineering, computer engineering, or a related field. Strong skills in digital and analog circuit design, proficiency with CAD tools like Cadence or Synopsys, and knowledge of semiconductor fabrication processes are essential. Gaining experience through internships or projects and obtaining relevant certifications can improve employment prospects.

What is the difference between Ipc Designer vs Electrical Drafter?

AspectIpc DesignerElectrical Drafter
CredentialsTypically requires an associate degree or technical certification in PCB design or electronicsUsually requires a high school diploma and technical drafting training
Work EnvironmentDesigning PCB layouts in electronics manufacturing or engineering firmsCreating electrical schematics and drawings in construction or manufacturing settings
Industry UsageCommonly used in electronics, aerospace, and telecommunications industriesCommon in construction, manufacturing, and electrical contracting industries

The main difference between an Ipc Designer and an Electrical Drafter lies in their focus and industry. Ipc Designers specialize in PCB layout design for electronics, requiring specific certifications and working primarily in electronics-related fields. Electrical Drafters focus on creating electrical schematics for construction or manufacturing projects, often with different certifications. Both roles involve technical drawing skills but serve distinct industries and purposes.

What is the IPC designer certification program?

The IPC designer certification program is a professional credential for individuals involved in designing printed circuit boards (PCBs). It validates knowledge of industry standards, design best practices, and the use of design tools like CAD software. Certification can enhance credibility and career opportunities for IPC designers.
More about Ipc Designer jobs
What cities are hiring for Ipc Designer jobs? Cities with the most Ipc Designer job openings:
What states have the most Ipc Designer jobs? States with the most job openings for Ipc Designer jobs include:
What job categories do people searching Ipc Designer jobs look for? The top searched job categories for Ipc Designer jobs are:
Ipc Designer jobs near you
Infographic showing various Ipc Designer job openings in the United States as of July 2026, with employment types broken down into 88% Full Time, 7% Part Time, 1% Temporary, and 4% Contract. Highlights an 88% Physical, 6% Hybrid, and 6% Remote job distribution, with an average salary of $100,705 per year, or $48.4 per hour.
Principal Printed Circuit Board (PCB) Designer

Principal Printed Circuit Board (PCB) Designer

Thales Defense & Security, Inc.

Clarksburg, MD • On-site

$109K - $139K/yr

Full-time

Medical, Retirement, PTO

Posted 19 days ago

Job description

Thales Defense & Security, Inc. (TDSI) Headquartered in Clarksburg, MD, is a U.S. company that has been serving domestic and international defense Air, Land and Sea domains for 60+ years. With over 1,000 employees, TDSI and its four subsidiaries (Advanced Acoustic Concepts, Digital Receiver Technology, Tampa Microwave, and Trusted Cyber Technologies), supports U.S. Joint Services, special operations forces and multi-national partners with a variety of communication, visualization, signal intelligence/electronic warfare, and sensor/sonar capabilities. TDSI's key technologies include tactical handheld radios, expeditionary satellite terminals, helmet-mounted displays, optics and target recognition capability, advanced radars, undersea sensing and missile systems. Lives depend on what we do!
Top Benefits (Subject to terms of applicable policies/plans)
  • Competitive Salary
  • Yearly Incentive Compensation Plan
  • Medical insurance for self and eligible family members
  • Generous 401(k) program- up to 7% company contribution and 100% immediate vesting
  • Tuition Reimbursement
  • Paid wellness, vacation, and holiday leave
  • Paid maternity, paternity, and parental leave
  • 9/80 Work Schedule (every other Friday off)
  • Hybrid working environment

We are excited to announce that we have an opening in our Clarksburg, MD office for a Principal PCB Designer. This role reports to the Electrical Engineering Manager.
Responsibilities
  • Layout and route Rigid, Flex, and Rigid Flex PCB's that consist of analog and digital circuits and components.
  • Modify electronic circuit schematics and lead PCB design/layout activities.
  • Create documentation to manufacture printed wiring assemblies (PCAs).
  • Work with Vendors to design Stackups for HDI designs.
  • Implement Design rules into ECAD tools.
  • Create and maintain Component Library as required.
  • Create new library components as required for new designs.
  • Provide technical guidance, support and mentoring to less experienced PCB Designers.
  • Interface, resolve, and document PCB issues arising from board fabrication.
  • Participate in continuous improvement and team building activities.
  • Maintain productive working relationships with all team members.
  • Complete assigned tasks in a quality and timely manner with minimal supervision.
  • Effectively support and communicate to management status, issues, needs and ideas.

Qualifications
The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  • U.S. Citizenship required. - Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.
  • ASEE or equivalent work experience.
  • 12+ years of electrical PCB Layout design experience including high speed digital communications busses.
  • Firm understanding of IPC standards for the production of Rigid and Rigid-Flex PCBs (IPC-6011, IPC-6012 CLASS 3, IPC-6013 CLASS 3, IPC-2221, IPC-7351, AND IPC-SM-840D CLASS 3).
  • Firm understanding of High-Speed Digital layout techniques (up to 25 GHz).
  • Must have recent Rigid-Flex layout experience.
  • Must have recent DDR3 or DDR4 layout experience.
  • Ability to start and complete complex PC designs per instruction by Electrical and Mechanical designers.
  • Proficiency at designing both RF and digital designs.
  • Expert user of current PCB design software including BOTH Cadence OrCAD PCB Designer and Altium Designer. Siemens Xpedition (Mentor DxDesigner) experience is a plus.
  • CAD library administration including symbol, footprint generation and component parameter administration.
  • Experience with HDI via structures.
  • Familiarity with risk reducing PCB design techniques regarding EMC/EMI to meet military and aerospace standards.
  • Ability to analyze a design to meet technical requirements.
  • Ability to think "out-of-the-box" and develop innovative design concepts.
  • Experience with DoD standards and practices (MIL-STD, ASTM, ANSI, etc.).
  • Experience with Microsoft Office tools, such as MSExcel, MSWord, and Visio.
  • Strong communication skills.

The annualized pay range for this role is $109,470- $139,879 along with a target incentive compensation plan (ICP) of 5%. The pay range provided is a good faith estimate representative of the experience level for the role described above. TDSI considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.
For specific questions about this job posting, candidates may contact talent acquisition at careers@thalesdsi.com.
Thales Defense & Security, Inc. is committed to non-discrimination as applicable under federal, state and local laws. We are an E-Verify Employer.
If you need an accommodation or assistance in order to apply for a position with Thales Defense & Security, Inc., please call Human Resources at 202-961-1016.
#LI-JD1 #LI-Onsite

Apply