ZipRecruiter

Log In

2

Entrylevel Quality Control Inspector Jobs in Houston, TX

Control Devices LLC

QC Inspector

Houston, TX · On-site

Position: QC Inspector Reporting Line: QHSE Manager Department: Manufacturing Facility: Lumpkin Rd. Location: Houston, TX FLSA Status: Non-Exempt Work Status: Direct Indirect Company Overview Gilmore ...

Focus

Quality Control Inspector

Katy, TX · On-site

$22 - $24/hr

As a member of our company, the Quality Control Inspector is required to perform hands-on and visual inspections on products prior to testing (pre-power inspection). Must be detail oriented, able to ...

AWC Indeed

Quality Control Inspector

Conroe, TX

Quality Control Inspector Location: Conroe, Texas Job Type: Full-Time | Onsite Industry: Oil amp; Gas / Manufacturing About the Role: We are seeking a detail-oriented and motivated Quality Control ...

Enerstaff

Quality Control Inspector

Houston, TX · On-site

$20 - $25/hr

QUALITY CONTROL INSPECTOR (TEMPORARY) Location: Houston, TX 77049 Pay: $20-$25 DOE Shift: 8am-5pm Start: ASAP Duration: 3 months QUALITY CONTROL INSPECTOR (TEMPORARY) Location: Houston, TX 77049 Pay ...

New

Enerstaff

Quality Control Inspector

Houston, TX · On-site

$20 - $25/hr

QUALITY CONTROL INSPECTOR (TEMPORARY) Location: Houston, TX 77049 Pay: $20-$25 DOE Shift: 8am-5pm Start: ASAP Duration: 3 months QUALITY CONTROL INSPECTOR (TEMPORARY) Location: Houston, TX 77049 Pay ...

Enerstaff

Quality Control Inspector

Houston, TX · On-site

$20 - $25/hr

QUALITY CONTROL INSPECTOR (TEMPORARY) Location: Houston, TX 77049 Pay: $20-$25 DOE Shift: 8am-5pm Start: ASAP Duration: 3 months QUALITY CONTROL INSPECTOR (TEMPORARY) Location: Houston, TX 77049 Pay ...

DBM GLOBAL INC

QC Inspector

Humble, TX

The QC Inspector uses a high degree of proficiency while utilizing full skills of the trade including knowledge of codes and standards to verify that the final product is free of defects and meets ...

SCHUFF STEEL CO

QC Inspector

Humble, TX · On-site

The QC Inspector uses a high degree of proficiency while utilizing full skills of the trade including knowledge of codes and standards to verify that the final product is free of defects and meets ...

Schuff Steel

QC Inspector

Humble, TX · On-site

The QC Inspector uses a high degree of proficiency while utilizing full skills of the trade including knowledge of codes and standards to verify that the final product is free of defects and meets ...

Connect Staffing

Quality Control Inspector

Houston, TX · On-site

$18 - $21/hr

Connect Staffing is hiring a Quality Control Technician for an oilfield drilling components manufacturer in North Houston, TX. In this role, you will inspect rotors, stators, and precision-machined ...

next page

Showing results 1-20

People also search for

All JobsEntrylevel Quality Control Inspector JobsEntrylevel Quality Control Inspector Jobs in Houston, TX

Entrylevel Quality Control Inspector information

See Houston, TX salary details

$11

$20

$31

How much do entrylevel quality control inspector jobs pay per hour?

As of Jun 10, 2026, the average hourly pay for entrylevel quality control inspector in Houston, TX is $20.51, according to ZipRecruiter salary data. Most workers in this role earn between $16.54 and $22.93 per hour, depending on experience, location, and employer.
What are popular job titles related to Entrylevel Quality Control Inspector jobs in Houston, TX? For Entrylevel Quality Control Inspector jobs in Houston, TX, the most frequently searched job titles are:
What job categories do people searching Entrylevel Quality Control Inspector jobs in Houston, TX look for? The top searched job categories for Entrylevel Quality Control Inspector jobs in Houston, TX are:
What cities near Houston, TX are hiring for Entrylevel Quality Control Inspector jobs? Cities near Houston, TX with the most Entrylevel Quality Control Inspector job openings:
Entrylevel Quality Control Inspector jobs near you
QC Inspector

QC Inspector

Control Devices LLC

Houston, TX • On-site

Full-time

Posted 12 days ago

Job description

Position: QC Inspector
Reporting Line: QHSE Manager
Department: Manufacturing
Facility: Lumpkin Rd.
Location: Houston, TX
FLSA Status: Non-Exempt
Work Status: Direct Indirect
Company Overview
Gilmore's manufacturing and headquarters are located in Houston, Texas USA, and it has a network of distribution partners that span the globe supporting global regional markets.
Our people are fundamental to the success of our organization and remain at the heart of our achievements. At Gilmore, we aim to develop our business around a valued and motivated workforce that encourages personal development and allows our people to flourish and realize their fullest potential.
Role Synopsis
Inspects finished products, in-process, incoming materials, and witness/reviews of assembly and test functions and documentation, etc. for conformance to company standards. Conducts routine and non-routine analysis of raw materials, in-process, and finished product, using variety of testing devices and procedures to maintain product quality.
Essential Duties & Responsibilities (includes, but is not limited to the following)
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed herein are representative of the knowledge, skill, and/or ability required. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. These duties and responsibilities are not listed in order of importance.
  • Conduct dimensional inspections of machined parts ensuring product meets drawing specifications and standards, purchase order requirements, and customer standards as applicable.
  • Ability to read and interpret drawings including a thorough understanding of GD&T.
  • Expert at the determination of best, efficient inspection methods and choosing appropriate measurement and monitoring devices to confirm compliance with drawing requirements.
  • Use typical measuring instruments and tools in a QC lab (optical comparator, profilometer, hardness testers, height gages, micrometers, calipers, manual CMM etc.)
  • Zeiss DCC CMM experience with Calypso software is a plus.
  • Basic tool calibration of hand tools (micrometers, calipers etc.) and understanding of tool measurement capabilities.
  • Machine shop math including trigonometry.
  • Understanding of material traceability. Ability to read and interpret material test reports for raw material receiving inspection.
  • Conducts final inspection for product release prior to the product leaving the facility ensuring all defined requirements are met. Includes paperwork and test package review.
  • Maintain housekeeping in the Quality Control Lab.
  • Working knowledge of ISO 9001, API Q1, and has a good understanding of quality management system principles.
  • Able to work in a team with minimal supervision of required tasks.
  • Develop work instructions and procedures as directed by the QHSE Manager.
  • Other duties and responsibilities as assigned by the QHSE Manager

Compliance Requirements
Gilmore has a Business Ethics Policy (the "Policy") which provides guidance to employees in day-to-day roles, as well as helping the employee and the business comply with the law at all times. The incumbent must read, understand and comply with, at all times, the Policy along with all other corresponding policies, procedures and directives.
QHSE Responsibilities
  • Demonstrate a personal commitment to Quality, Health, Safety and the Environment
  • Apply Gilmore, and where appropriate Client Company's, Quality, Health, Safety & Environment Policies and Safety Management Systems
  • Promote a culture of continuous improvement, and lead by example to ensure company goals are achieved and exceeded

Qualifications/Work Experience
Education
  • High School diploma or equivalent

Experience/ Skills
  • Minimum of 3 years experience as an inspector conducting precision part dimensional inspection and general oilfield valve inspections and tests.
  • Ability to read and interpret documents such as technical drawings, procedures, operating instructions, and safety rules.
  • Ability to write routine reports and correspondence.
  • Ability to solve practical problems and deal with a variety of situations where only limited information is available, with minimal supervision.
  • Ability to interpret a variety of instructions in English in both written and oral format.
  • Strong communication and organization skills.
  • Working knowledge of Microsoft Office software.
  • Working knowledge of PSI gages and ADT pressure pumps.

Preferred
  • CMM - Coordinate-Measuring Machine experience highly preferred.
  • Proficient in Calibration data entry and protocol per standards

Physical Requirements
The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions.
  • Ability to lift and carry files, packages, and boxes weighing up to fifty (50) pounds.
  • Natural or corrected vision to read printed materials and computer screens.
  • Natural or corrected hearing and speech to communicate in person and over the telephone.
  • Capable of properly using standard office equipment, including a telephone, and a computer with keyboard.
  • Ability to wear required Personal Protective Equipment (PPE). Includes hard hats, steel-toed shoes, safety glasses, etc.

Work Environment
The work environment characteristics described herein are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions.
  • Work will mostly be performed indoors in a controlled environment.
  • Some exposure to the manufacturing and shop areas

Apply