ZipRecruiter

Log In

2

Entry Level Metal Fabrication Jobs (NOW HIRING)

Ipsen, Inc.

Sheet Metal Workers

Souderton, PA · On-site

... sheet entry level and experienced metal fabricators. Mon-Fri first shift (6:30am to 3:00pm) with ... Qualifications Prior sheet metal fabrication experience is preferred. Must have good basic math ...

AtWork Personnel

Metal Fabricator / Welder

Marietta, GA · On-site

$18 - $26/hr

Welder / Fabrication Technician Locations: Marietta, Kennesaw & Atlanta, GA Schedule: Full-Time Pay ... We work with candidates at all levels, from entry level to management. We will assist you in ...

Superior Duct Fabrication, Inc.

Be Seen First

Sheet Metal Production Worker

Corona, CA · On-site

$18 - $20/hr

Superior Duct Fabrication in Corona is seeking to fill one opening for entry-level production ... Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating ...

AtWork Personnel

Metal Fabricator / Welder

Marietta, GA · On-site

$18 - $26/hr

Welder / Fabrication Technician Locations: Marietta, Kennesaw & Atlanta, GA Schedule: Full-Time Pay ... We work with candidates at all levels, from entry level to management. We will assist you in ...

Fabrication Company

Entry Level Welder

Sussex, WI · On-site

$19 - $22/hr

Behr Enterprises is looking for an entry level Welder. Position will be focused in a high priority ... Company Description Specializing in metal fabrication, welding, and assembly of a variety of ...

Molina Ventures LLC

Be Seen First

Commercial Sheet Metal Mechanic

San Antonio, TX · On-site

$20 - $26/hr

This is not an entry-level position . We need people who understand commercial HVAC duct ... Sheet metal fabrication experience. * Ability to modify fittings in the field. * Ability to ...

Molina Ventures LLC

Be Seen First

Commercial Sheet Metal Mechanic

San Antonio, TX · On-site

$20 - $26/hr

This is not an entry-level position . We need people who understand commercial HVAC duct ... Sheet metal fabrication experience. * Ability to modify fittings in the field. * Ability to ...

New Tech Metals

Be Seen First

General Labor / Parts Puller - Fabrication

New Franken, WI · On-site

$19 - $20/hr

This is an entry-level manufacturing position responsible for removing, deburring, counting ... Remove finished metal parts from sheet metal and production equipment. * Deburr and finish parts ...

ACO, Inc.

Metal Shop Apprentice

Casa Grande, AZ · On-site

$17.50/hr

METAL SHOP APPRENTICE SUMMARY: Full Time The Metal Shop Apprentice is an entry-level training position designed to develop the skills necessary for a successful career in metal fabrication and ...

ACO, Inc.

Metal Shop Apprentice

Casa Grande, AZ · On-site

$17.50/hr

METAL SHOP APPRENTICE SUMMARY: Full Time The Metal Shop Apprentice is an entry-level training position designed to develop the skills necessary for a successful career in metal fabrication and ...

ACO, Inc.

Metal Shop Apprentice

Casa Grande, AZ · On-site

$17.50/hr

METAL SHOP APPRENTICE SUMMARY: Full Time The Metal Shop Apprentice is an entry-level training position designed to develop the skills necessary for a successful career in metal fabrication and ...

previous page

Showing results 41-60

All JobsManufacturing JobsMetal Fabrication JobsSheet Metal Mechanic JobsEntry Level Metal Fabrication Jobs

Entry Level Metal Fabrication information

See salary details

$12

$21

$32

How much do entry level metal fabrication jobs pay per hour?

As of Sep 8, 2026, the average hourly pay for entry level metal fabrication in the United States is $21.74, according to ZipRecruiter salary data. Most workers in this role earn between $17.31 and $24.52 per hour, depending on experience, location, and employer.

What is an entry level metal fabrication?

An Entry Level Metal Fabrication job involves working with metal materials to cut, shape, and assemble components using tools like saws, welders, and grinders. Workers typically assist experienced fabricators, follow blueprints, and ensure quality control. No prior experience is usually required, but basic mechanical skills and attention to detail are beneficial. Safety training and on-the-job learning help beginners develop important fabrication techniques.

What does an entry level metal fabrication do?

A typical day in Entry Level Metal Fabrication involves reading blueprints or instructions, measuring and cutting metal pieces, operating basic machinery and tools, and assisting experienced fabricators with assembly or welding tasks. You'll spend much of your time on the shop floor, collaborating with supervisors and teammates to ensure projects are completed accurately and safely. Attention to detail and a focus on workplace safety are key, as you'll be working in an environment where precision and adherence to protocols matter. As you gain experience, you may have opportunities to learn new skills and take on more responsibility within the fabrication team.

What are the key skills and qualifications needed to thrive in entry level metal fabrication?

To thrive as an Entry Level Metal Fabrication worker, you need basic math, measurement, and blueprint reading skills, along with a high school diploma or equivalent, and a willingness to learn hands-on fabrication techniques. Familiarity with hand tools, power tools, and common shop equipment (such as welders and grinders) is important, and OSHA safety certification is often beneficial. Attention to detail, reliability, and strong communication make you stand out in this position. These skills ensure you can follow instructions, maintain safety, and contribute effectively to production goals in a team-oriented environment.

How to get into entry level metal fabrication?

To start in entry level metal fabrication, gaining basic skills in welding, cutting, and metalworking is essential. Completing a high school diploma or equivalent and obtaining relevant certifications, such as OSHA safety training or welding certifications, can improve job prospects. Hands-on experience through apprenticeships or entry-level positions helps develop practical skills in a manufacturing environment.
More about Entry Level Metal Fabrication jobs

What cities are hiring for Entry Level Metal Fabrication jobs?

Cities with the most Entry Level Metal Fabrication job openings:

What are the most commonly searched types of Metal Fabrication jobs?

The most popular types of Metal Fabrication jobs are:

What states have the most Entry Level Metal Fabrication jobs?

States with the most job openings for Entry Level Metal Fabrication jobs include:

What job categories do people searching Entry Level Metal Fabrication jobs look for?

The top searched job categories for Entry Level Metal Fabrication jobs are:

Entry Level Metal Fabrication jobs near you
Infographic showing various Entry Level Metal Fabrication job openings in the United States as of August 2026, with employment types broken down into 92% Full Time, 3% Part Time, 2% Contract, and 3% Nights. Highlights an 96% Physical, 1% Hybrid, and 3% Remote job distribution, with an average salary of $45,214 per year, or $21.7 per hour.

Sheet Metal Workers

Ipsen, Inc.

Souderton, PA • On-site

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted 21 hours ago

Job description

Company Description

Global manufacturer located in Souderton PA seeks full time first shift sheet entry level and experienced metal fabricators.  Mon-Fri first shift (6:30am to 3:00pm) with overtime as required.

We offer competitive wages and an excellent benefits package including medical, dental, vision, 401K, life & disability insurance and paid vacation & sick time.

Job Description

Are you mechanically inclined and looking for hands-on work? If so, apply now! We are seeking full time sheet metal mechanics for our busy production department. Position involves cutting, bending, grinding, punching and shearing thin gauge sheet metal to fabricate parts for vacuum furnaces. Use of shears, brake presses, punch presses, drill presses and saws.

*Must have mechanical experience. Must be mechanically inclined. Prior sheet metal experience is a plus. (Note: this is not a welding position)

*Good basic math skills are required, must be able to use measuring devices. Ability to understand basic shop drawings/blue prints is helpful.

Experience using band saws, drill presses, brake presses, punches, grinders etc is preferred.

Qualifications

Prior sheet metal fabrication experience is preferred.

Must have good basic math skills - ability to read a tape measure and blue prints is required.

Must be able to lift up to 50 lbs and stand/walk for up to 8 hours per day.

Must be able to pass a background check and drug test.

Must be reliable and have your own transportation to and from Souderton (there is no public transportation)

Additional Information

  Wages depend on experience.  Please reply with resume and desired hourly rate.

 "All your information will be kept confidential according to EEO guidelines".

Apply