ZipRecruiter

Log In

2

Entry Level Machinist Jobs in Raleigh, NC (NOW HIRING)

Armtec Defense Technologies

Machine Operator

Lillington, NC · On-site

$14.25 - $17/hr

Lillington, NC, USA Type: Full Time Job Summary Machine Operator: Entry-level position in the manufacturing assembly area that requires assembler tasks and set up of and operation of automatic and ...

Raleigh Labor Source. Inc.

Be Seen First

Construction Laborers (Entry level to Skilled)

Raleigh, NC · On-site

$15 - $18/hr

Positions are available for entry-level workers, skilled laborers and specialized trades such as ... Safely operate hand tools, power tools, and construction machinery as needed. * Following all ...

Horizon Research Inc.

Be Seen First

Entry-Level Research Associate

Chapel Hill, NC · On-site

Entry-Level Research Associate Location: Chapel Hill, NC Position Type: This is a full-time, hybrid ... machine, printer) · Communicate effectively, both orally and in writing · Travel by car and ...

Horizon Research Inc.

Be Seen First

Entry-Level Research Associate

Chapel Hill, NC · On-site

Entry-Level Research Associate Location: Chapel Hill, NC Position Type: This is a full-time, hybrid ... machine, printer) · Communicate effectively, both orally and in writing · Travel by car and ...

At Work Group- Raleigh, NC

Be Seen First

Warehouse Production Associate (1st & 2nd Shifts)

Zebulon, NC · On-site

$13 - $14.50/hr

This position is responsible for operating production machinery, communicating with supervisor/team, and keeping up with a fast-paced work flow. Entry-level friendly. Hablamos Espanol! Position:

Blue Line Aviation LLC

Dishwasher

Smithfield, NC · On-site

$11.25 - $14.50/hr

This is an entry-level position which involves setting up, operating, monitoring and repairing dishwashing machines, as well as performing other dishwashing duties. Responsibilities: * Washing dishes.

Low and Slow Smokehouse

Dishwasher

Smithfield, NC

$11.25 - $14.50/hr

This is an entry-level position which involves setting up, operating, monitoring and repairing dishwashing machines, as well as performing other dishwashing duties. Responsibilities: * Washing dishes.

Low and Slow Smokehouse

Dishwasher

Smithfield, NC · On-site

$11.25 - $14.50/hr

This is an entry-level position which involves setting up, operating, monitoring and repairing dishwashing machines, as well as performing other dishwashing duties. Responsibilities: * Washing dishes.

Low and Slow Smokehouse

Dishwasher

Smithfield, NC

$11.25 - $14.50/hr

This is an entry-level position which involves setting up, operating, monitoring and repairing dishwashing machines, as well as performing other dishwashing duties. Responsibilities: * Washing dishes.

Adecco

Warehouse Worker - Durham, NC

Raleigh, NC

$15 - $16.13/hr

Are you looking for an entry-level opportunity with steady pay and growth potential? Adecco is ... Support machine operations by unloading trays of cards, inspecting for defects, and loading ...

Adecco

Warehouse Worker - Durham, NC

Raleigh, NC

$15 - $16.13/hr

Are you looking for an entry-level opportunity with steady pay and growth potential? Adecco is ... Support machine operations by unloading trays of cards, inspecting for defects, and loading ...

Adecco

Warehouse Worker - Durham, NC

Raleigh, NC

$15 - $16.13/hr

Are you looking for an entry-level opportunity with steady pay and growth potential? Adecco is ... Support machine operations by unloading trays of cards, inspecting for defects, and loading ...

Three Point Solutions

Product Engineer

Fuquay Varina, NC · On-site

$40 - $43/hr

Heavy Machine Manufacturing Company Duration: 12 Months Location: Fuquay-Varina, NC 27526 Shift: 1st Shift (8:00 AM - 4:00 PM, with possible overtime) Job Summary: Entry-level engineering role ...

Adecco

Warehouse Worker

Cary, NC

$15 - $16.13/hr

This entry-level role offers a competitive starting pay of $15.00 - $16.13 per hour, with ample overtime opportunities to boost your earnings. What You'll Do: * Support machine operations by ...

Adecco

Warehouse Worker

Cary, NC · On-site

$15 - $16.13/hr

This entry-level role offers a competitive starting pay of $15.00 - $16.13 per hour, with ample overtime opportunities to boost your earnings. What You'll Do: * Support machine operations by ...

next page

Showing results 1-20

All JobsMachinist JobsEntry Level Machinist JobsEntry Level Machinist Jobs in Raleigh, NC

Entry Level Machinist information

See Raleigh, NC salary details

$11

$16

$21

How much do entry level machinist jobs pay per hour?

As of Jul 19, 2026, the average hourly pay for entry level machinist in Raleigh, NC is $16.98, according to ZipRecruiter salary data. Most workers in this role earn between $15.19 and $18.46 per hour, depending on experience, location, and employer.

What are some common challenges faced by entry level machinists, and how can they overcome them?

Entry level machinists often encounter challenges such as interpreting complex technical drawings, achieving precise measurements, and adapting to different types of machinery. These challenges can be overcome by seeking mentorship from experienced machinists, actively participating in on-the-job training, and consistently practicing measurement and machine operation skills. Building strong communication with team members and supervisors also helps, as it allows new machinists to ask questions and learn best practices, ultimately leading to improved confidence and technical proficiency.

What Does an Entry-Level Machinist Do?

As an entry-level machinist, your job is to read blueprints and use machinery to make cuts in various materials. This is primarily a training position that helps you develop the skills needed for becoming a professional machinist. As such, this job usually starts with simple machining tasks and progresses through a series of increasingly-complicated jobs until you know enough to no longer be called an apprentice. Entry-level machinists often use precise measuring instruments and equipment, perform mathematical calculations, and work under the supervision of an experienced machinist. This job usually involves standing for extended periods and occasionally lifting up to 35 pounds.

How much does an entry level machinist make?

An entry-level machinist typically earns between $15 and $20 per hour, with annual salaries ranging from approximately $30,000 to $40,000. Compensation can vary based on location, industry, and the complexity of the machinery operated, with skills in CNC programming and precision measurement often influencing pay rates.

What does an entry level machinist do?

An entry level machinist operates and maintains machines that shape metal and other materials into precise parts and tools. They typically work under the supervision of experienced machinists, learning to read blueprints, set up equipment, and monitor production processes. Their duties often include measuring finished parts, performing routine machine maintenance, and ensuring safety protocols are followed. This role is a foundational step in a machining career and provides hands-on experience with various manufacturing equipment.

What is the difference between Entry Level Machinist vs Apprentice Machinist?

AspectEntry Level MachinistApprentice Machinist
CredentialsHigh school diploma or equivalent; some technical trainingEnrolled in apprenticeship program; technical training included
Work EnvironmentManufacturing shops, machine shopsOn-the-job training under supervision, often in same environments
Employer & Industry UsageEntry-level positions in manufacturing and machiningTraining phase within manufacturing industry, often with union programs

While both roles involve machining tasks, an Entry Level Machinist is typically ready to perform basic machining duties independently after some training, whereas an Apprentice Machinist is still learning and gaining hands-on experience through a structured program. Both roles are essential in manufacturing, with apprentices focusing on skill development before becoming fully qualified machinists.

How to get started as a machinist?

To start as an entry-level machinist, obtain a high school diploma or equivalent and complete a technical training program or apprenticeship in machining. Developing skills in reading blueprints, operating machine tools, and understanding safety procedures is essential, and earning certifications such as the National Institute for Metalworking Skills (NIMS) can improve job prospects.

Will CNC machinists be replaced by AI?

CNC machinists operate computer-controlled machines and are essential for setting up, programming, and maintaining equipment. While AI and automation can handle repetitive tasks, skilled machinists are needed to oversee complex operations, troubleshoot issues, and ensure quality, making complete replacement unlikely in the near future.

Can you be a machinist with no experience?

Entry-level machinist positions often do not require prior experience, as employers may provide on-the-job training and may look for candidates with basic technical skills, a high school diploma, and an interest in machining. Developing knowledge of tools, safety procedures, and measurement techniques can help new machinists succeed in starting their careers.

What are the key skills and qualifications needed to thrive as an Entry Level Machinist, and why are they important?

To thrive as an Entry Level Machinist, you need basic mechanical aptitude, math skills, and a high school diploma or equivalent, often supplemented by vocational training. Familiarity with CNC machines, micrometers, calipers, and blueprint reading is typically required. Attention to detail, problem-solving abilities, and a willingness to learn are standout soft skills in this field. These skills and qualities are crucial for producing precise parts, maintaining safety, and ensuring smooth workflow in a manufacturing environment.
More about Entry Level Machinist jobs
What are the most commonly searched types of Machinist jobs in Raleigh, NC? The most popular types of Machinist jobs in Raleigh, NC are:
What are popular job titles related to Entry Level Machinist jobs in Raleigh, NC? For Entry Level Machinist jobs in Raleigh, NC, the most frequently searched job titles are:
What job categories do people searching Entry Level Machinist jobs in Raleigh, NC look for? The top searched job categories for Entry Level Machinist jobs in Raleigh, NC are:
What cities near Raleigh, NC are hiring for Entry Level Machinist jobs? Cities near Raleigh, NC with the most Entry Level Machinist job openings:
Entry Level Machinist jobs near you
Infographic showing various Entry Level Machinist job openings in Raleigh, NC as of July 2026, with employment types broken down into 100% Full Time. Highlights an 100% In-person job distribution, with an average salary of $35,312 per year, or $17 per hour.
Machine Operator

Machine Operator

Armtec Defense Technologies

Lillington, NC • On-site

$14.25 - $17/hr

Full-time

Posted 5 days ago

Job description

Machine Operator, Armtec Defense Technologies
Armtec Defense Technologies (Armtec) is an operating unit of the Transdigm Group (NYSE: TDG), an industry leader in aerospace and defense products and services. Armtec is comprised of three business units producing subcomponents for ordnance in Coachella, CA; decoy countermeasure flares in Camden AR; and radar countermeasure chaff in Lillington NC. At Armtec, we welcome skilled and enthusiastic people who share our determination and high standards to join us in our mission-critical work supporting the US and allied war-fighters who serve us all by defending democracy and protecting freedom. This position is staffed in Lillington, at Armtec's world-class, sole-source facility for aerial countermeasure chaff.
Company Profile
Company Name: Armtec Defense Technologies, a subsidiary of Transdigm Corporation
Industry: Aerospace/Defense Products & Services
Number of Employees: 75
Job Overview
Title: Machine Operator
Job Family: Operations/Production
Reports to: Production Supervisor
Works with: Manufacturing Team
Location: Lillington, NC, USA
Type: Full Time
Job Summary
Machine Operator:
Entry-level position in the manufacturing assembly area that requires assembler tasks and set up of and operation of automatic and semi-automatic machines including, but not limited to, hank taping, roving, and polar cutting. Job rotates with the general assembly operations as required. Work with machine operators, pack finished goods and hand assemble chaff products. Must be able to do simple math calculations and read and write. Observes safety procedures. Maintain clean and safe work area.
Primary Responsibilities
• Must be able to lift 25 pounds repetitively, must be able to operate
Semi-automatic hank taping machine and automatic roving machines.
• Must be able to stand for up to 10 hours, must be able to bend, stoop, reach; repetitively lift up to 25 lbs., push and pull 500-700lb. wheeled hank carts, and sit.
• Exposed to noise and dust.
• Will maintain all equipment within safety operating parameters.
• Will maintain accurate logs and TPM charts.
• Must be able to start up and shutdown equipment.
• Must be flexible to production, maintenance, and equipment needs
• Maintain the highest ethical standards, even when challenged from above.
• Understand and live by Armtec's ethics and business conduct policies.
Qualifications
• Excellent manual dexterity and hand-eye coordination is required.
• The ability to read, write and comprehend the English language is required.
• Applicants must have the ability and willingness to work overtime as needed.
• Must perform SPC applications.
• Must be authorized to work in U.S.
• To conform to U.S. export control regulations, applicant should be eligible for any required authorization from the U.S. Government.
Education/Previous Experience Requirement
• High School diploma/GED
• 1 year manufacturing experience
• Tow motor experience preferred
Work Hours:
4-10 hour days
40 hours week
Overtime as needed
Equal Opportunity Employer M/F/ Disability/Protected

Apply