1

Cross Connection Control Device Inspector Jobs (NOW HIRING)

$34.09 - $37.71/hr

Moderate previous experience is required in cross-connection control, backflow prevention, environmental compliance, water distribution, plumbing inspection, code enforcement, or a related field.

next page

Showing results 1-20

Cross Connection Control Device Inspector information

See salary details

$11

$21

$33

How much do cross connection control device inspector jobs pay per hour?

As of Jul 21, 2026, the average hourly pay for cross connection control device inspector in the United States is $21.48, according to ZipRecruiter salary data. Most workers in this role earn between $17.31 and $24.04 per hour, depending on experience, location, and employer.

What kind of jobs in media bring in $150,000 a year?

A Cross Connection Control Device Inspector typically earns between $50,000 and $80,000 annually, with higher salaries possible for senior inspectors or those with specialized certifications. Jobs in media rarely reach $150,000 unless they involve executive roles, high-level management, or specialized technical positions such as media executives or producers with extensive experience. Salary levels depend on industry, experience, and location, but media roles generally do not offer such high salaries for entry- or mid-level positions.

What are the key skills and qualifications needed to thrive as a Cross Connection Control Device Inspector, and why are they important?

To thrive as a Cross Connection Control Device Inspector, you need strong knowledge of plumbing systems, water safety regulations, and typically a certification in cross-connection control or backflow prevention. Familiarity with inspection tools, backflow testing equipment, and relevant reporting software is commonly required. Attention to detail, problem-solving abilities, and effective communication are crucial soft skills for this role. These skills ensure the safety and compliance of water systems, protecting public health and meeting regulatory standards.

How much do backflow testers make?

Backflow testers, including Cross Connection Control Device Inspectors, in California typically earn between $20 and $40 per hour, depending on experience, certifications, and location. The annual salary can range from approximately $40,000 to $80,000, with some experienced professionals earning higher wages. Certification and knowledge of local regulations can influence earning potential.

What is the difference between Cross Connection Control Device Inspector vs Backflow Prevention Tester?

AspectCross Connection Control Device InspectorBackflow Prevention Tester
CertificationsTypically requires Cross Connection Control certification and possibly backflow prevention certificationsRequires backflow prevention device testing certification, often including state-specific licenses
Work EnvironmentInspecting plumbing systems, public water systems, and cross connection devicesTesting and maintaining backflow prevention devices in various settings
Industry UsageUsed mainly by water utilities, health departments, and plumbing inspectorsPrimarily employed by plumbing companies, water districts, and testing agencies

While both roles involve ensuring water safety and require knowledge of backflow prevention, the Cross Connection Control Device Inspector focuses on inspecting and verifying cross connection devices, whereas the Backflow Prevention Tester specializes in testing and maintaining backflow prevention devices. Both roles often require similar certifications and work in related environments, but their specific responsibilities differ.

What are Cross Connection Control Device Inspectors?

Cross Connection Control Device Inspectors are professionals responsible for inspecting, testing, and maintaining backflow prevention devices to protect drinking water supplies from contamination. They ensure that cross connections—where potable water could be exposed to pollutants—are correctly identified and controlled in buildings and public water systems. These inspectors typically work for utilities, municipalities, or private companies, and must be knowledgeable about plumbing systems, local codes, and state regulations. Their work helps maintain public health and safety by preventing the reverse flow of contaminated water into clean water systems.

What does a cross connection control specialist do?

A cross connection control specialist inspects and tests backflow prevention devices to ensure they are functioning properly and preventing contamination of potable water supplies. They identify potential cross connections, enforce plumbing codes, and may require certification to perform inspections and repairs. Their work helps maintain water safety and compliance with health regulations.

What are some common challenges faced by Cross Connection Control Device Inspectors in the field?

Cross Connection Control Device Inspectors often face challenges such as accessing devices in hard-to-reach or confined spaces, interpreting complex plumbing systems, and ensuring compliance with evolving local and state regulations. They may also encounter situations where property owners or facility managers are not fully aware of inspection requirements, requiring effective communication and education skills. Inspectors must keep meticulous records and manage multiple site visits, making strong organizational skills essential for success in the role.

How hard is it to get your backflow certification?

For a Cross Connection Control Device Inspector, obtaining backflow certification typically involves completing a state-approved training course and passing a certification exam. The process can take several days to weeks depending on the program and requires knowledge of plumbing, water systems, and safety standards.
More about Cross Connection Control Device Inspector jobs
What job categories do people searching Cross Connection Control Device Inspector jobs look for? The top searched job categories for Cross Connection Control Device Inspector jobs are:
Infographic showing various Cross Connection Control Device Inspector job openings in the United States as of July 2026, with employment types broken down into 1% As Needed, 79% Full Time, 17% Part Time, and 3% Contract. Highlights an 93% Physical, 1% Hybrid, and 6% Remote job distribution, with an average salary of $44,668 per year, or $21.5 per hour.
Cross Connection Control Specialist

Cross Connection Control Specialist

City of Tracy

Tracy, CA

$90K - $109K/yr

Other

Medical, Dental, Vision, Life, PTO

Posted 8 days ago


Job description

Description Click here to learn more about the City of Tracy and here for the job announcement. TENTATIVE RECRUITMENT SCHEDULE Application Deadline: July 31, 2026 @ 4:00 PM Oral Board Exam: WEEK OF AUGUST 10, 2026 (THIS STEP WILL ONLY BE SCHEDULED IF NEEDED) Selection interview: WEEK OF AUGUST 17, 2026 ABOUT THE OPPORTUNITY The ideal Cross Connection Control Specialist is a knowledgeable, detail-oriented professional committed to protecting public health and ensuring the safety of Tracy's drinking water system. They are a confident leader who balances technical expertise, regulatory compliance, and team supervision while coordinating the City's Cross Connection Control Program.

The successful candidate is organized, analytical, and proactive, with the ability to interpret and apply evolving water regulations, oversee program operations, communicate effectively with a variety of stakeholders, and confidently use technology to support efficient program administration. Above all, they are committed to continuous improvement, operational excellence, and delivering safe, reliable water service to the Tracy community. WHY CHOOSE CITY OF TRACY The City of Tracy offers excellent pay, including 4% COLA increases in July 2027 and 2028.

Employees approved to work a compressed work schedule also enjoy strong work-life balance through a 9/80 schedule, providing a three-day weekend every other week. Our competitive benefits package includes fully covered HMO Medical, Dental and Vision for employee + family, generous vacation and sick leave, life insurance, optional 457(b) deferred compensation with a City match, and longevity pay. We proudly participate in CalPERS, with employees enrolled in either the 2% @ 55 or 2% @ 62 formula based on eligibility, with retirement calculated using a three-year final compensation average.

For a full overview of everything we offer, check out our Benefits section to learn more about the programs and support available to City of Tracy employees. Together, these benefits reflect our commitment to employee well-being, long-term stability, and rewarding career growth. DEFINITION Under general direction, coordinates and administers various day-to-day activities related to the City's Cross Connection Control Program, including plans, schedules, assigns, reviews, and participates in the work of staff responsible for providing testing and certification of back-flow prevention assemblies; maintains the City's backflow prevention device database; conducts cross-connection surveys and inspections to meet local and State requirements; oversee the testing of new mains in accordance with state requirements; provide technical and functional program support to the division; and performs related duties, as assigned.

SUPERVISION RECEIVED AND EXERCISED Receives general direction from assigned supervisory or management staff. Exercises supervision over assigned staff. CLASS CHARACTERISTICS This is a professional class that performs the full range of duties related to the day-to-day administration of the City's Cross Connection Control Program.

The incumbent is designated as the Cross Connection Control Coordinator in accordance with the State Water Resource Control Board Cross Connection Control Handbook, and the City's ordinances and standards. Is also responsible for planning, organizing, supervising, reviewing, and evaluating the work of staff providing cross-connection support related to the Cross Connection Control Program and is expected to work independently and apply breadth and depth of knowledge in cross-connection and back-flow prevention procedures and regulations. Successful performance of the work requires the frequent use of tact, discretion, and independent judgment, knowledge of departmental and City activities, and extensive staff, public, and organizational contact.

Positions at this level receive only occasional instruction or assistance as new or unusual situations arise and are fully aware of the operating procedures and policies of the work unit. Essential and Marginal Duties EXAMPLES OF TYPICAL JOB FUNCTIONS (Illustrative Only) Management reserves the right to add, modify, change, or rescind the work assignments of different positions and to make reasonable accommodation so that qualified employees can perform the essential functions of the job. Coordinate and administer the City's Cross Connection Control Program.

Manages, investigates, and documents all water quality customer complaints. Plans, organizes, assigns, supervises, and reviews the work of staff responsible for maintaining an annual backflow testing and maintenance schedule and monthly notification program; coordinating the testing, maintenance and repair of backflow prevention devices; communicating with testing contractors to investigate devices that have failed or have not been tested; issuing enforcement letters; and initiate water shut off procedures, as necessary. Participates in the development and implementation of goals, objectives, policies, and priorities for assigned services and programs; identifies resource needs; recommends and implements policies and procedures, including standard operating procedures.

Evaluates employee performance, counsels employees, and effectively recommends initial disciplinary action; assists in selection and promotion. Trains staff in work and procedures and in the operation and use of backflow prevention devices; implements procedures and standards. Monitors operations and activities of assigned staff; recommends improvements and modifications and prepares various reports on operations and activities.

Inspects work in progress and completed work of assigned employees for accuracy, proper work methods, techniques, and compliance with applicable standards and specifications. Identifies opportunities for improving service delivery methods and procedures; provides recommendations concerning process changes; reviews with appropriate management staff; implements improvements. Performs the most complex backflow and cross connection control duties and provides technical assistance to assigned staff.

Monitors and controls supply and equipment; orders supplies and equipment as necessary; prepares documents for equipment procurement. Oversees and participates in assembling and compiling information for a variety of departmental, State mandated, and statistical reports, including verifying accuracy and completion of prevention assemblies, locations, inspections, and testing. Prepares and presents staff reports, presentations, and other necessary correspondence; participates in community meetings as necessary.

Consult with, and explain cross connection control requirements, to property owners, managers, contractors, government agencies and the public. Maintain and administer the City of Tracy list of certified backflow assembly testers. Monitors changes in regulations and technology that may affect operations; implements policy and procedural changes after approval.

Attends and participates in professional group meetings; stays abreast of new trends and innovations related to cross connection control services; research emerging products and enhancements and their applicability to City needs. Provides general information regarding department policies, procedures, and regulations, including responding appropriately to complaints, requests for information, and requests for service in person and by telephone, forwarding written complaints against personnel, and coordinating work with other City departments. Performs other related duties as assigned.

Minimum Qualifications KNOWLEDGE OF Principles and practices of employee supervision, including work planning, assignment, review and evaluation, discipline, and the training of staff in work procedures. Principles and practices of leadership. Applicable Federal, State and local laws, ordinances, regulations, and guidelines relevant to recycled water and cross-connection control regulations, including shut down tests.

Operations, services, and activities of a cross-connection control program. Principles, practices, and techniques of cross-connections. Basic principles and practices of budget administration and accountability.

Materials, methods, techniques, and terminology used in the implementation and enforcement of cross-connection control of potable and recycled water systems. Use, testing, and operation of backflow prevention devices. Business letter writing and the standard format for reports and correspondence.

Business arithmetic and basic statistical techniques. Record keeping principles and procedures. Principles and practices of data collection and report preparation.

Techniques for providing a high level of customer service effectively dealing with the public, vendors, contractors, and City staff. The structure and content of the English language, including the meaning and spelling of words, rules of composition, and grammar. Modern equipment and communication tools used for business functions and program, project, and task coordination.

Computers and software programs (e.g., Microsoft software packages) to conduct, compile, and/or generate documentation. ABILITY TO Lead, implement, and administer a cross-connection program in accordance with the State Water Resource Control Board Cross Connection Control Handbook, and the City's ordinances and standards. Select and supervise staff, provide training and development opportunities, ensure work is performed effectively, and evaluate performance in an objective and positive manner

Recommend and implement goals, objectives, policies, and procedures for providing cross-connection control program services and activities. Analyze, interpret, apply, explain, and ensure compliance with applicable Federal, State, and local policies, procedures, laws, and regulations. Identify problems, research and analyze relevant information, and develop and present recommendations and justification for solutions.

Perform the most difficult back-flow prevention assemblies and operate related equipment, tools, and materials properly. Develop cost estimates for supplies, tools, and equipment. Research, analyze, and evaluate new service delivery methods, procedures, and techniques.

Prepare clear and concise reports, correspondence, procedures, and other written materials. Maintain accurate records and files of work performed. Make accurate arithmetic, financial, and statistical computations.

Establish and maintain a variety of manual and computerized record keeping systems. Effectively representing the department and the City in meetings with governmental agencies; community groups; various business, professional, and regulatory organizations; and in meetings with individuals. Learn and understand the organization and operation of the City and of outside agencies as necessary to assume assigned responsibilities.

Independently organize work, set priorities, meet critical deadlines, and follow-up on assignments. Effectively use computer systems, software applications, and modern business equipment to perform a variety of work tasks. Communicate clearly and concisely, both orally and in writing, using appropriate English grammar and syntax.

Use tact, initiative, prudence, and independent judgment within general policy, procedural, and legal guidelines. Establish, maintain, and foster positive and effective working relationships with those contacted in the course of work. EDUCATION AND EXPERIENCE Any combination of training and experience that would provide the required knowledge, skills, and abilities is qualifying.

A typical way to obtain the required qualifications would be: Equivalent to an associate's degree with major course work in a related field such as natural resource or utility management, environmental science, biological or physical science, engineering, or planning, and three (3) years of increasingly responsible cross-connection control survey/inspection experience. LICENSES AND CERTIFICATIONS Possession of, or the ability to obtain, a valid Class C California driver's license upon appointment. May be required to complete National Incident Management System (NIMS) Training.

Possession of a Backflow Prevention Assembly General Tester Certificate from the American Water Works Association is required at time of application. Possession of a Cross Connection Control Specialist Certificate from the American Water Works Association is required at time of application. Possession and continued maintenance of a Grade D1 Water Distribution Operator Certificate from the State Water Resources Control Board is required within six (6) months of hire.

Additional Information PHYSICAL DEMANDS When assigned to an office environment, must possess mobility to work in a standard office setting and use standard office equipment, including a computer; vision to read printed materials and a computer screen; and hearing and speech to communicate in person and over the telephone; ability to stand and walk between work areas may be required. Finger dexterity is needed to access, enter, and retrieve data using a computer keyboard or calculator and to operate standard office equipment. Positions in this classification occasionally bend, stoop, kneel, reach, push, and pull drawers open and closed to retrieve and file information.

When assigned to field inspection, must possess mobility to work in changing site conditions; possess the strength, stamina, and mobility to perform light to medium physical work; to sit, stand, and walk on level, uneven, or slippery surfaces; to reach, twist, turn, kneel, and bend, to climb and descend ladders; and to operate a motor vehicle and visit various City sites; vision to inspect site conditions and work in progress. The job involves fieldwork requiring frequent walking in operational areas to identify problems or hazards, with exposure to hazardous materials in some site locations. Employees must possess the ability to lift, carry, push, and pull materials and objects averaging a weight of 50 pounds, or heavier weights, in all cases with the use of proper equipment and/or assistance from other staff.

ENVIRONMENTAL CONDITIONS Employees work in an office environment with moderate noise levels, controlled temperature conditions, and no direct exposure to hazardous physical substances. Employees also work in the field and are exposed to loud noise levels, cold and hot temperatures, inclement weather conditions, road hazards, vibration, confining workspace, chemicals, mechanical and/or electrical hazards, and hazardous physical substances and fumes. Employees may interact with upset staff and/or public and private representatives in interpreting and enforcing departmental policies and procedures.

WO...