ZipRecruiter

Log In

1

Contract Rf Filter Design Engineer Jobs in California

Skyworks

$22.50 - $42/hr

... engineers on advanced RF module technologies. This position is intended for highly motivated graduate students interested in RF design, electromagnetics, filter/RFIC/module co-design. You will ...

Skyworks

$22.50 - $42/hr

Description This is a Winter/Spring (January to June) co-op position on the Filter Design team at ... Understanding of cellular RF systems The typical pay range for an Engineering intern across the U.S ...

SpaceX

RF Engineer (Starship)

Hawthorne, CA · On-site

$145K - $175K/yr

... IIP2, IMD), RF filter design, and transmission line theory * Experience with revision control ... RF Engineer/Level I: $125,000.00 - $150,000.00/per year RF Engineer/Level II: $145,000.00 - $175 ...

Koch Industries

Senior RF Engineer

Camarillo, CA · On-site

$120K - $180K/yr

As a Senior RF Design Engineer, you'll be the technical cornerstone of our RF product development ... filter design, and electromagnetic compatibility. • Strong problem-solving skills and the ability ...

Raytheon

Senior RF Design Engineer

Los Angeles, CA · On-site

Effector RF Design Department is responsible for designing RF and Microwave hardware, including ... Filter design and fabrication * Circuit card assembly design and fabrication * Testing or designing ...

Raytheon

Senior RF Design Engineer

San Jose, CA

Effector RF Design Department is responsible for designing RF and Microwave hardware, including ... Filter design and fabrication * Circuit card assembly design and fabrication * Testing or designing ...

Raytheon

Senior RF Design Engineer

San Diego, CA · On-site

Effector RF Design Department is responsible for designing RF and Microwave hardware, including ... Filter design and fabrication * Circuit card assembly design and fabrication * Testing or designing ...

previous pagenext page

Showing results 21-40

All JobsContract Rf Filter Design Engineer JobsContract Rf Filter Design Engineer Jobs in California

Contract Rf Filter Design Engineer information

What is a contract RF filter design engineer?

Contract RF Filter Design Engineers are professionals who specialize in designing radio frequency (RF) filters on a contractual basis, rather than as permanent employees. They work with clients or companies to develop, analyze, and optimize electronic filters that control signal frequencies in RF systems, such as those found in wireless communications, radar, and broadcasting. Their work may involve using simulation software, prototyping, and testing to ensure filters meet specific performance criteria. These engineers often have expertise in electrical engineering, signal processing, and practical experience with various filter topologies. Contract roles can range from short-term projects to longer engagements, depending on the client's needs.

What are some typical challenges faced by a contract RF filter design engineer when joining a new project team?

As a Contract RF Filter Design Engineer, one common challenge is quickly adapting to different design methodologies and toolsets used by various clients. You may also encounter tight project timelines that require efficient problem-solving and rapid prototyping. Additionally, integrating your designs with existing system architectures and collaborating with cross-functional teams—such as hardware, testing, and manufacturing—can require strong communication skills to ensure all requirements are met. Being proactive in understanding client expectations and documentation standards is key to a smooth onboarding process.

What are the key skills and qualifications needed to thrive as a contract RF filter design engineer, and why are they important?

To excel as a Contract RF Filter Design Engineer, you need a solid background in electrical engineering, expertise in RF/microwave filter theory, and experience with circuit simulation and design, typically supported by a relevant engineering degree. Proficiency with design and simulation tools such as ADS, HFSS, CST, and familiarity with network analyzers and CAD software is essential. Strong problem-solving skills, attention to detail, and effective communication are valuable soft skills that set top engineers apart. These capabilities ensure the development of high-performance, reliable RF filters that meet stringent client and project requirements.

What is the difference between Contract Rf Filter Design Engineer vs Contract RF Circuit Design Engineer?

AspectContract Rf Filter Design EngineerContract RF Circuit Design Engineer
Primary FocusDesigning RF filters for signal integrity and frequency selectionDesigning RF circuits including amplifiers, mixers, and oscillators
Skills & CertificationsRF filter theory, simulation tools, relevant certificationsRF circuit design, PCB layout, simulation tools
Work EnvironmentElectronics manufacturing, telecommunications, aerospaceWireless devices, telecommunications, defense

While both roles involve RF design, the Contract Rf Filter Design Engineer specializes in creating filters to shape signal spectra, whereas the Contract RF Circuit Design Engineer focuses on broader RF circuit components. The choice depends on whether the project emphasizes filter performance or overall RF circuitry development.

What are the most commonly searched types of Rf Filter Design Engineer jobs in California?

The most popular types of Rf Filter Design Engineer jobs in California are:

What are popular job titles related to Contract Rf Filter Design Engineer jobs in California?

For Contract Rf Filter Design Engineer jobs in California, the most frequently searched job titles are:

What job categories do people searching Contract Rf Filter Design Engineer jobs in California look for?

The top searched job categories for Contract Rf Filter Design Engineer jobs in California are:

What cities in California are hiring for Contract Rf Filter Design Engineer jobs?

Cities in California with the most Contract Rf Filter Design Engineer job openings:

Contract Rf Filter Design Engineer jobs near you
Infographic showing various Contract Rf Filter Design Engineer job openings in California as of September 2026, with employment types broken down into 85% Full Time, 5% Part Time, and 10% Contract. Highlights an 100% In-person job distribution.

Senior Staff RF Design Engineer - Unmanned Aircraft Systems

San Diego, CA • On-site

TrellisWare Technologies
Telecommunications • 201 - 500 employees
Learn more about TrellisWare Technologiesexternal

Full-time

Re-posted 19 days ago

Job description

TrellisWare launched in 2000 with an innovative culture striving to push technological boundaries in the area of wireless communications. We are now a worldwide leader in highly advanced algorithms, waveforms, and communications systems that range from small form factor radio products to fully integrated solutions.
At TrellisWare, we connect passion with purpose and together we make an impact- on our careers, our company, and the world. And you can too. If you love to innovate and collaborate in a dynamic environment where boundaries are being pushed, you belong at TrellisWare. Where the opportunity to serve is not a challenge but a gift. Where you're never going alone. Because there's too much at stake to go solo.
Our Hardware Platforms and Accessories Team is seeking a Senior Staff RF Design Engineer specializing in Hardware systems for Unmanned Aircraft Systems (UAS). You would be responsible for designing and developing RF/Analog systems and modules for use within UAS platforms. This includes identifying and understanding requirements for wireless products in UAS platforms; designing RF, analog, and digital circuits that meet those requirements while keeping focus on minimizing Size, Weight & Power; driving design verification of new TrellisWare UAS products; transitioning product design into manufacturing; and sustaining the design throughout the product lifetime. The successful RF Design Engineer will fulfill these responsibilities by working collaboratively with Product Management, Program Management, and Sales along with engineering leads from Software, Product Test, and Manufacturing.
Enhancing cohesiveness and maintaining team morale is a responsibility of all our team members, as is the ambition for self-improvement and talent development. Through this dedication to unity and professional advancement, each team member is directly impacting the successful outcome of TrellisWare's deliverables and setting the tone for our core values of delivering excellence, pushing boundaries, and empowering people.
The essential duties and responsibilities include:
  • Work with Business Development and Product Management to clearly identify system requirements and HW features of UAS platforms and applicable TrellisWare products.
  • Lead HW design/architecture development for UAS systems across TrellisWare RF, Analog, Digital, and Mechanical disciplines.
  • Work with TrellisWare's Radio Products group to understand how Radio system SW runs on UAS products and drive HW design to facilitate SW operation.
  • Work with TrellisWare's Waveforms group to understand how modem performance depends on developed HW and drive design to meet Waveform/modem performance on UAS HW products.
  • Work with Program Management to establish schedules and budgets for development of new UAS products.
  • Lead HW-centric DVT of developed UAS platform including reviews of DVT results and recommendations.
  • Work with TrellisWare's product test, and certification groups to ensure developed HW meets overall UAS platform requirements.
  • Drive required manufacturing support infrastructure including test boards and fixtures, as well as test and calibration functionality needed for manufacturing.
  • Own creation and maintenance of product design material in TrellisWare's PLM systems.
  • Assist in developing product documentation.
  • Support technical customer meetings to provide integration recommendations, expected performance capabilities, and participate in customer troubleshooting.
  • Develop relationships with team members built on trust and respect.

Education and work experience requirements are:
  • Bachelor's degree in electrical engineering or related field of study required.
  • 10+ years of experience as an RF/Wireless Design Engineer

To be considered for this position, you would need to meet, at a minimum, the knowledge, skills, and abilities listed here:
  • Understands transceiver design, frequency conversion, frequency synthesizers, and PLL design to 3 GHz with tight packaging constraints.
  • Experience with front-end amplifiers and filter design.
  • Experience with receive sensitivity, noise figure, and transmit power measurements.
  • Experience with RF Power Amplifier design and characterization.
  • Demonstrates knowledge of RF analysis and computer-aided design tools.
  • Proficiency in circuit debugging and troubleshooting.
  • Experience with wireless communications and test equipment design.
  • Experience developing products for UAS or similar environments where SWaP, reliability, and performance are critical factors is preferred.
  • Ability to abstract complex, technical concepts and communicate them in a clear, relevant, complete manner to others.
  • Ability to work independently, demonstrate initiative and interact with a variety of engineering development teams.
  • Demonstrates analytical and problem-solving skills.
  • Demonstrates strong written and verbal communication skills.
  • Ability to work independently as well as in a team environment
  • Strong collaborative drive and interpersonal skills.
  • Strong initiative, proactive work ethic and prioritization skills.
  • Effective execution and decision making.

The physical demands described here represent those that must be met in order to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable those with qualified disabilities.
  • Able to frequently sit, stand, walk, use hands to fingers, handle or feel, reach within hands and arm's length, stoop, kneel, and crouch, talk and hear.
  • Regularly required to sit for extended periods of time; frequently required to use office equipment such as PC, printer, telephone, etc.
  • Able to regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds.
  • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

Additional requirements are:
  • U.S. Citizenship.

Note: Many of TrellisWare's positions require a security clearance or the ability to obtain one. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
TrellisWare Technologies pays competitively according to the market in an individual's geographic location, in addition to their qualifications and experience. The posted range is annually and for individuals located in the San Diego, CA area.
San Diego, California Pay Range
$115,000-$200,000 USD
Disclaimers
  • The above statements are not intended to be an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Nothing in the job description restricts the company's right to change, assign, or reassign duties and responsibilities at any time for any reason.
  • As part of our onboarding process, we conduct background checks, where legally permitted and appropriate for the role, in accordance with applicable laws, regulations, and privacy requirements.

*TrellisWare Technologies, Inc. is an EEO/AA/Disability/Vets Employer.*
Check out the Careers page for more information about working at TrellisWare Technologies.

Apply