ZipRecruiter

Log In

1

Contract Controls Engineer Jobs in Florida (NOW HIRING)

Wunderlich-Malec

Controls Engineer

Orlando, FL · On-site

$77K - $100K/yr

Manage vendor scope to verify safety, functionality, and all contract requirements are satisfied ... engineering. Disciplines outside of the electrical/controls area will not be considered)

Virtual Hire Staffing

Controls Engineer

Orlando, FL · On-site

$80 - $110/hr

Manage vendor scope to verify safety, functionality, and all contract requirements are satisfied ... engineering. Disciplines outside of the electrical/controls area will not be considered)

Wunderlich-Malec

Controls Engineer

Orlando, FL · On-site

$77K - $100K/yr

Manage vendor scope to verify safety, functionality, and all contract requirements are satisfied ... engineering. Disciplines outside of the electrical/controls area will not be considered)

Kforce Technology Staffing

Controls Engineer

Juno Beach, FL · On-site

$81K - $105K/yr

Kforce has a client in Juno Beach, FL that is seeking a Controls Engineer. Key Responsibilities ... Hourly employees on a Service Contract Act project are eligible for paid sick leave. Note: Pay is ...

Johnson Controls

High Level Engineer - Controls

Miami, FL · On-site +1

$79K - $103K/yr

Uses available tools to assemble detailed applications for the customer contract, including the ... Performs detailed engineering or cost impact analysis to quantify cost savings or other customer ...

next page

Showing results 1-20

All JobsContract Controls Engineer JobsContract Controls Engineer Jobs in Florida

Contract Controls Engineer information

See Florida salary details

$41.1K

$72.2K

$97.9K

How much do contract controls engineer jobs pay per year?

As of Aug 24, 2026, the average yearly pay for contract controls engineer in Florida is $72,169.00, according to ZipRecruiter salary data. Most workers in this role earn between $62,400.00 and $80,700.00 per year, depending on experience, location, and employer.

What is a contract controls engineer?

A Contract Controls Engineer is a temporary or project-based professional responsible for designing, implementing, and maintaining control systems in industrial, manufacturing, or automation environments. They work with PLCs, SCADA systems, and other automation technologies to ensure efficient and reliable operations. Their role often includes programming, troubleshooting, and optimizing control systems to meet project or regulatory requirements. Typically, they collaborate with engineers, technicians, and stakeholders to deliver solutions on time and within budget. Contract positions allow flexibility and exposure to various industries and projects.

What does a contract controls engineer do?

A Contract Controls Engineer typically spends their days designing, programming, and commissioning control systems for client projects, often working onsite and remotely based on project needs. The role involves collaborating closely with project managers, electricians, and other engineers to ensure all automation solutions are delivered on time and meet client specifications. Routine tasks may include troubleshooting system issues, developing technical documentation, and overseeing installation or upgrades of control panels. The work environment is fast-paced and project-oriented, providing variety and the opportunity to tackle new technical challenges each week.

What are the key skills and qualifications needed to thrive as a contract controls engineer?

To thrive as a Contract Controls Engineer, you need a solid background in electrical or control systems engineering, experience with automation, and a relevant engineering degree. Familiarity with PLCs, SCADA systems, control panel design software, and certifications such as a Professional Engineer (PE) license are highly valued. Strong problem-solving abilities, effective communication, and adaptability are essential soft skills for success in this dynamic role. These skills are crucial for delivering reliable automation solutions, ensuring project success, and collaborating efficiently with multidisciplinary teams on contract-based projects.

What are the most commonly searched types of Controls Engineer jobs in Florida?

The most popular types of Controls Engineer jobs in Florida are:

What are popular job titles related to Contract Controls Engineer jobs in Florida?

For Contract Controls Engineer jobs in Florida, the most frequently searched job titles are:

What job categories do people searching Contract Controls Engineer jobs in Florida look for?

The top searched job categories for Contract Controls Engineer jobs in Florida are:

What cities in Florida are hiring for Contract Controls Engineer jobs?

Cities in Florida with the most Contract Controls Engineer job openings:

Contract Controls Engineer jobs near you
Infographic showing various Contract Controls Engineer job openings in Florida as of August 2026, with employment types broken down into 91% Full Time, 5% Part Time, and 4% Contract. Highlights an 85% Physical, 6% Hybrid, and 9% Remote job distribution, with an average salary of $72,169 per year, or $34.7 per hour.

Controls Engineer

Wunderlich-Malec

Orlando, FL • On-site

$77K - $100K/yr

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted 5 days ago

Job description

Wunderlich-Malec Engineering (WM) is a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States. When you join WM you become part of a company that is:
  • 100% employee-owned with 40+ years of industry history
  • ENR (Engineering News Record) Top 500 firm
  • Rated as a top System Integrator Giant

We have a Controls Engineer position open in Orlando, FL. This position is responsible for electrical/controls engineering on large scale projects. Project requirements involve control system design from scratch (hardware/software/network), electrical panel design and power calculations, risk assessment, component selection and configuration, control system programming, and control system installation/commissioning.
Major Responsibilities
  • Must be organized, technically competent, have effective oral and written communications, experienced in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters
  • Responsible for system design from blank sheet of paper to create concept of electrical/control/system components based on project requirements
    • Experience doing design via drafting software (AutoCAD preferred)
  • Provide input, and system modification as needed, for system integration with other project disciplines
    • Able to interface with facility design to optimize panel location minimizing voltage drop and designing a more efficient system hardware layout
  • Manage vendor scope to verify safety, functionality, and all contract requirements are satisfied
  • Ensures design complies with any local or government agency design/implementation codes in addition to client codes/standards
  • Knowledge of analyzing system design for Hazard analysis development and mitigation
  • Design and analysis for safety critical parts within a control system
  • Designing redundant mitigations in system to increase safety and reliability
  • Designing systems with complex motion and integration from automated systems
  • Develops documents of system configuration and design. Documents include Description of operation, Detailed control system design description, panel assembly drawings and schematics, termination drawings, network layout, system implementation/acceptance test plans, system routine maintenance/job plans
  • Able to perform the following system design calculations/analysis: Short circuit protection, harmonics, noise reduction / cancellation, power consumption, load flow, short circuit protection, protective relay / circuit design, ground fault monitoring, safety system implementation (SIL/PL rating knowledge is preferred)
  • Designs, develops, and implements DCS/PLC control system (logic software) to meet process requirements. As well as the ability to understand and implement client design standards for software system
  • Understanding of control system components and instrumentation to properly design software interface/control to achieve system functionality
  • Develops documents detailing control/software configuration and design. Documents include: Theory/Description of operation, Detailed control system design description, Software design plan, Detailed software implementation/description, system implementation/acceptance test plans
  • Knowledge of design, troubleshooting, and code implementation for the following programming languages: Ladder logic (required), C++ (preferred), visual basic (preferred), and structured text (required)
  • Ability to perform processor loading calculations, scan time analysis, input/output response timing analysis, control system network delays analysis, and program task/code block priorities/timing management/interface
  • Can design code that is efficient (not processor resource heavy) while maintaining a minimalist implementation to help facility future modifications and understanding by client post turnover. This includes providing any documentation and/or tools that will assist with program understanding and troubleshooting
  • Ability to diagnose control system issues during troubleshooting to assist in determining root cause (trending, system analysis, test logic, etc.)
  • Ability to minimize secondary faults from occurring within logic by programming "smart" diagnostics that can determine root cause and minimize further effects caused by initial fault
  • Will assist with initial start-up and debug integrated systems and the development of system documentation
  • Individual will be working on automation and control system integration projects for clients in industries such as entertainment and manufacturing
  • Will act as technical lead on projects and may guide lower level engineers, technicians, and contractors
  • Knowledge of ride system design for attractions involving guests is preferred
  • Capable of working "off" shifts as needed during installation/commissioning to support project

Job Requirements
  • Must be organized, technically competent, have effective oral and written communications, experienced in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters

Education Bachelor's degree in Electrical Engineering. (Bachelor's degrees in other disciplines may be acceptable if work experience is directly related to electrical engineering. Disciplines outside of the electrical/controls area will not be considered).
Experience 5+ years of experience covering most responsibilities listed above. Preferred experience in ASTM standards, attractions industry, safety engineering, instrumentation, components, and logic programming. Experience with AutoCAD is also desired.
Key Competencies Knowledge of contract documents and specifications. Ability to collect field data and accurately record findings. Ability to perform system design functions. Planning, Customer Focused, Timely Decision Making, Informing, Organizing, Priority Setting, Problem Solving. Experience working with hardware/software from one of the major industrial manufacturers (i.e. Allen-Bradly, Siemens, etc.). Experience with ethernet based distributed remote I/O systems.
Skills All employees are required to be proficient in the use of Microsoft Windows and Office environments.
Travel Ability to travel up to 30% worst case (10% is typical with last couple years depending on project).
Physical Demands of Position Seeing, color perception, hearing, listening, clear speech, dexterity in hands, driving, lifting, climbing, ability to mount and dismount equipment, pushing, and pulling.
Working Condition Expected on client location 5 days a week, Standard office environment, On-site office environment, and diverse industrial/construction environments. Frequent PC usage, copy machines, phones.
*Job Descriptions are not exhaustive lists of all skills, responsibilities, or efforts associated with a job. They reflect principal job elements essential for performing the job and evaluating performance.
Wunderlich-Malec is proud to offer a comprehensive employee-owner benefit package. Full-time employees may be eligible for the following benefits: Medical • Dental • Vision • Basic and Supplemental Life and AD&D • Long Term Disability • Voluntary Short Term Disability • Healthcare & Dependent Care Flexible Spending Accounts • Health Savings Account • Paid Time Off (PTO) • Paid Holidays • Tuition Reimbursement • Referral Bonus Program • 401(k)/Profit Sharing • 100% ESOP (Employee Stock Ownership Plan) • Employee Assistance Program • Will Preparation Resources • Worldwide Travel Assistance
#LI-WM1
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Apply