ZipRecruiter

Log In

1

Assistant X Ray Welding Jobs (NOW HIRING)

Curtiss Wright EMD

Weld Engineer

Cheswick, PA

$85K - $125K/yr

... x-ray quality structural and seal welds . * Candidates need a working knowledge of welding ... To assist in the review of supplier qualifications and procedures or provide support for audits.

Vip Staffing - zrb

Combo Welder

New Braunfels, TX

$30/hr

... steel welding test, purged root with a 304 fill. Both tests are sent to an X-Ray lab for non ... A welder is also required to assist fitter and a variety of other tasks supervisor deems necessary.

VIP Staffing

Combo Welder

New Braunfels, TX · On-site

$25 - $30/hr

... steel welding test, purged root with a 304 fill. * Both tests are sent to an X-ray lab for ... A welder is also required to assist the fitter and perform a variety of other tasks the supervisor ...

VIP STAFFING

Combo Welder

New Braunfels, TX

$25 - $30/hr

... steel welding test, purged root with a 304 fill. * Both tests are sent to an X-ray lab for ... A welder is also required to assist the fitter and perform a variety of other tasks the supervisor ...

Vip Staffing - zrb

Combo Welder

New Braunfels, TX

$30/hr

... steel welding test, purged root with a 304 fill. Both tests are sent to an X-Ray lab for non ... A welder is also required to assist fitter and a variety of other tasks supervisor deems necessary.

RK Industries, LLC

Welder - Hiring Now

Denver, CO

$19.75 - $26/hr

From interpreting blueprints and weld symbols to setting up fixtures and performing X-ray quality ... Continually evaluate weld machine performance and technology to improve cycle times. * Assist shop ...

RK Industries, LLC

Welder - Submarine Building

Denver, CO

$19.75 - $26/hr

From interpreting blueprints and weld symbols to setting up fixtures and performing X-ray quality ... Continually evaluate weld machine performance and technology to improve cycle times. * Assist shop ...

Moxtek

X-Ray Manufacturing Systems Engineer II

Orem, UT · On-site

$63K - $81K/yr

... * Assist with troubleshooting equipment and process interactions in manufacturing environments ... Welding methods such as TIG, spot welding, and laser welding. * X-ray tube manufacturing, electron ...

Kinsley Steel, Inc.

Master Welder III

Richmond, VA

Perform advanced welding on carbon steel, stainless steel, and aluminum. * Ability to successfully carbon arc gouge * Produce x-ray quality welds for critical applications. * Assist with WPS ...

Kinsley Steel, Inc.

Master Welder III

Richmond, VA · On-site

$31 - $35/hr

Perform advanced welding on carbon steel, stainless steel, and aluminum. * Ability to successfully carbon arc gouge * Produce x-ray quality welds for critical applications. * Assist with WPS ...

Moxtek

X-Ray Manufacturing Systems Engineer II

Orem, UT · On-site

$70K - $90K/yr

... * Assist with troubleshooting equipment and process interactions in manufacturing environments ... Welding methods such as TIG, spot welding, and laser welding. * X-ray tube manufacturing, electron ...

Howmet

XRAY Tech Level II - 3rd Shift

Dover, NJ

$28 - $31/hr

Expected to assist in the implementation of Howmet's EHS value and policy statement and its ... Locates defects on actual castings from x-ray film indications and marks locations for weld repair ...

RK Industries, LLC

Shop Pipe Welder

Denver, CO · On-site

$32 - $36/hr

From interpreting blueprints and weld symbols to setting up fixtures and performing X-ray quality ... Continually evaluate weld machine performance and technology to improve cycle times. * Assist shop ...

RK Industries, LLC

Shop Pipe Welder

Denver, CO · On-site

From interpreting blueprints and weld symbols to setting up fixtures and performing X-ray quality ... Continually evaluate weld machine performance and technology to improve cycle times. * Assist shop ...

Aerotek

Vessel Welder

Houston, TX · On-site

$27.50 - $30/hr

... shop. * Assist with or perform fitting tasks, including fitting pipe or learning pipe fitting ... Demonstrated ability to perform back gouging for 100% X-ray quality welds. * Experience welding on ...

RK Industries, LLC

Shop Pipe Welder

Denver, CO · On-site

$32 - $36/hr

From interpreting blueprints and weld symbols to setting up fixtures and performing X-ray quality ... Continually evaluate weld machine performance and technology to improve cycle times. * Assist shop ...

next page

Showing results 1-20

All JobsAssistant X Ray Welding Jobs

Assistant X Ray Welding information

What is the difference between Assistant X Ray Welding vs Assistant Welding?

AspectAssistant X Ray WeldingAssistant Welding
CertificationsBasic welding certifications, X-ray safety trainingBasic welding certifications
Work EnvironmentIndustrial sites, areas requiring non-destructive testingGeneral welding sites, workshops
Job ResponsibilitiesAssisting with X-ray inspections, preparing welds for testingAssisting with welding tasks, preparing materials

Assistant X Ray Welding focuses on supporting non-destructive testing processes using X-ray technology, requiring specialized safety training. In contrast, Assistant Welding involves general support in welding tasks without the need for X-ray procedures. Both roles are essential in industrial settings but differ mainly in technical requirements and responsibilities.

More about Assistant X Ray Welding jobs
What cities are hiring for Assistant X Ray Welding jobs? Cities with the most Assistant X Ray Welding job openings:
What are the most commonly searched types of X Ray Welding jobs? The most popular types of X Ray Welding jobs are:
What states have the most Assistant X Ray Welding jobs? States with the most job openings for Assistant X Ray Welding jobs include:
What job categories do people searching Assistant X Ray Welding jobs look for? The top searched job categories for Assistant X Ray Welding jobs are:
Assistant X Ray Welding jobs near you
Infographic showing various Assistant X Ray Welding job openings in the United States as of June 2026, with employment types broken down into 20% Full Time, 76% Part Time, and 4% Contract. Highlights an 98% Physical, 1% Hybrid, and 1% Remote job distribution.
Welding & Pipefitting Technician

Welding & Pipefitting Technician

Cushman & Wakefield

Eddyville, IA • On-site

$40.19/hr

Full-time

Medical, Dental, Vision, Life, Retirement

Posted 6 days ago

Cushman & Wakefield rating

7.7

Company rating: 7.7 out of 10

Based on 150 frontline employees who took The Breakroom Quiz

71st of 154 rated real estate companies

Job description

Job Title
Welding & Pipefitting Technician
Job Description Summary
Welding & Pipefitting Technician
Who Are We?
C&W Services is the industry leader in cutting-edge maintenance and janitorial programs for facilities ranging corporate office portfolios and manufacturing plants to large public venues-keeping our client's facility running smoothly all the time.
What's The Job?
Title: Welding & Pipefitting Technician
Location: Eddyville, IA
Salary: Up to $40.19
Hours: Monday -Thursday 6:00 am -4:30 pm
What's in it for me?
Weekly pay on Fridays.
Comprehensive benefits day one, including Employee Perks and Daily Pay Program.
Advancement opportunities.
Training to work in a cutting-edge facility.
Company provided safety apparel and uniforms.Job Description
What Will I Be Doing?
Here are just a few things you can expect to do daily:
  • Team member must be able to work in a team oriented and safety conscious environment. "Safety First" expectations include, but are not limited to, PJHA process, Observation process, and compliance with all company / site safety guidelines and procedures.

  • Assigned tasks list to include, but not limited to, repairs and preventive maintenance on tanks, vessels, piping systems and structural systems.

  • This position may require moderate supervision and follow-up.

  • Tasks also include layout and fabrication of new and replacement piping systems, as well as installation of valves and related piping equipment. Repairs and preventive maintenance to be performed in conformance with established standards. Assist in formulating preventive maintenance standards / work procedures while performing those duties and provide work order feedback on discrepancies noted in service delivery.

  • Must have working knowledge of the following topics; blueprint reading, ability to draw and interpret isometric diagrams, or be able to be certified to B31. 1 Pipe Welding Code as well as 6-G in stainless steel. Lays out, positions, and secures parts and assemblies according to specifications, using straightedge, combination square, calipers, and ruler.

  • Tack-welds or welds components and assemblies, using electric, gas, arc, or other welding equipment. Cuts workpiece, using powered saws, hand shears, or chipping knife. Melts lead bar, wire, or scrap to add lead to joint or to extrude melted scrap into reusable form. Installs or repairs equipment, such as lead pipes, valves, floors, and tank linings.

  • Observes tests on welded surfaces, such as hydrostatic, x-ray, and dimension tolerance to evaluate weld quality and conformance to specifications. Inspects grooves, angles, or gap allowances, using micrometer, caliper, and precision measuring instruments. Removes rough spots from work piece, using portable grinder, hand file, or scraper.

  • Welds components in flat, vertical, or overhead positions. Heats, forms, and dresses metal parts, using hand tools, torch, or arc welding equipment. Ignites torch and adjusts valves, amperage, or voltage to obtain desired flame or arc.

  • Deciphers engineering drawings and specifications to plan layout, assembly, and welding operations. Develops templates and other work aids to hold and align parts. Identifies required equipment and welding method, applying knowledge of metallurgy, geometry, and welding techniques.

  • Works from elevated areas such as ladders, platforms, scaffolding, etc. utilizing fall protection equipment as necessary to complete tasks. Must have the flexibility to work all shifts including holidays and weekends as demanded by the job. Perform other tasks, including but not limited to mechanical repairs and maintenance, as assigned by Supervisor

  • Ensures compliance with all company / customer regulations, policies, and procedures.

  • Achieve performance expectations set forth as part of performance appraisals to include employee development planning.

  • Communications with all team members to assist the development of short- and long-range planning in assist of the company's goals and objectives

  • Maintain personal tools required for your job to include an up to date documented personal tool list. Required tool listing to be supplied as part of employment.

  • Meet physical requirements of the job. Physical requirements of the job will be provided to you prior to employment.

  • Perform assigned tasks in a safe, effective, and efficient manner.

  • Accurate and timely administrative duties to include, but not limited to, time accounting and work order completion.

Special Note: This job description summarizes the duties of two types of welders. "Pipe Fitters" perform much of the preparation work while "Pipe Welders" are certified and perform the actual welding. We are currently seeking an individual who is certified, willing and able to perform the duties of both Pipe Fitter and Pipe Welder.
What Makes Me Qualified?
Don't meet all of the requirements but are still interested in working for us? Please apply and we will review your resume for other roles!
  • Education: Welding Certificate

  • 2+ years of Industrial Pipe Fitting, Pipe Welding and Repairs. Certification required.

  • 1-2 years of education in industrial maintenance technologies preferred.

What are the physical demands of the role?
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
  • The ability to observe details at close range (within a few feet of the observer).

  • Control Precision - The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions.

  • Manual Dexterity - The ability to quickly grasp, manipulate, or assemble objects.

  • Substantial lifting (up to 50 pounds) is required

  • Ability to move for extended or continuous periods of time

  • Ability to ascend and descend staircases, ladders, and/or step stools

  • Ability to operate applicable hand tools, power tools, and equipment

  • Ability to operate forklifts or other vehicles in a safe manner

  • Ability to wear a respirator while performing job duties

  • Communication/ Expression -The ability to communicate information and ideas so others will understand.

  • Information Ordering - The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).

What is the work environment?
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable employees with disabilities to perform the essential functions.
While performing the duties of this job, the employee is frequently exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; risk of electrical shock and vibration. The employee is occasionally exposed to extreme heat and extreme cold, wet and/or humid conditions. The noise level in the work environment is usually very loud.
Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements.
The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications.
The company will not pay less than minimum wage for this role.
The compensation for the position is: $34.16 - $40.19
C&W Services is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated.
In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at C&W Services, please call the ADA line at 1-888-365-5406 or email Accommodations@cushwake.com. Please refer to the job title and job location when you contact us.
INCO: "C&W Services"

What Cushman & Wakefield employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply