ZipRecruiter

Log In

1

Union Insulator Jobs (NOW HIRING)

ABM Industries

Union Electrician

Boston, MA · On-site

$56.61/hr

ABM Industries is seeking a Union Electrician (103) to support the electrical needs of a commercial ... and pull insulated wires or cables through the conduit to complete circuits between boxes.

ABM Industries

Union Electrician

Boston, MA · On-site

$56.61/hr

ABM Industries is seeking a Union Electrician (103) to support the electrical needs of a commercial ... and pull insulated wires or cables through the conduit to complete circuits between boxes.

Brown and Root

Mechanical Apprentice

Valliant, OK

Mechanical Apprentice Apply, remove, and repair insulation on equipment, pipes, ductwork, or other ... union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

Brown & Root

Mechanical Apprentice

Valliant, OK · On-site

Mechanical Apprentice Apply, remove, and repair insulation on equipment, pipes, ductwork, or other ... union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

ABM Industries

Union Electrician

Boston, MA

$56.61/hr

ABM Industries is seeking a Union Electrician (103) to support the electrical needs of a commercial ... and pull insulated wires or cables through the conduit to complete circuits between boxes.

Brown & Root

Mechanical Apprentice

Valliant, OK · On-site

Mechanical Apprentice Apply, remove, and repair insulation on equipment, pipes, ductwork, or other ... union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

pcg

Shipyard Worker/Hull Trainee

San Diego, CA

$21.97/hr

Insulation work performed on the job will be reviewed and evaluated by supervisors. All newly hired ... Employees will be required to join the applicable labor union, Local 5 or Local 721 * Must be at ...

pcg

Shipyard Worker/Hull Trainee

San Diego, CA

$21.97/hr

Insulation work performed on the job will be reviewed and evaluated by supervisors. All newly hired ... Employees will be required to join the applicable labor union, Local 5 or Local 721 * Must be at ...

Topbuild

Fabricator - Union

Portland, OR · On-site

$21.30 - $25.27/hr

About Your Future with Distribution International Are you looking for a career with an industry leader that drives the future of energy-efficient insulation and building material products? Is being ...

TopBuild Corp.

Fabricator - Union

Portland, OR · On-site

$21.30 - $25.27/hr

About Your Future with Distribution International Are you looking for a career with an industry leader that drives the future of energy-efficient insulation and building material products? Is being ...

next page

Showing results 1-20

All JobsUnion Insulator Jobs

Union Insulator information

See salary details

$12

$24

$31

How much do union insulator jobs pay per hour?

As of Jun 12, 2026, the average hourly pay for union insulator in the United States is $24.58, according to ZipRecruiter salary data. Most workers in this role earn between $20.19 and $26.44 per hour, depending on experience, location, and employer.

What jobs pay $2000 a day?

Union insulators typically do not earn $2000 a day; high-paying construction or specialized trades may reach such daily rates, especially with overtime, experience, or union negotiations. These roles often require certifications, physical skill, and work in demanding environments. Most high-earning jobs in construction or skilled trades are project-based and depend on location, experience, and union agreements.

Is there a union for insulators?

Yes, there are unions for insulators, such as the International Association of Heat and Frost Insulators and Allied Workers. These unions provide collective bargaining, training, and job support for insulators across various regions.

What are the key skills and qualifications needed to thrive as a Union Insulator, and why are they important?

To thrive as a Union Insulator, you need strong mechanical aptitude, knowledge of insulation materials and installation techniques, and typically a high school diploma or GED, often supplemented by apprenticeship training. Familiarity with tools like cutting devices, power tools, and safety equipment, as well as adherence to OSHA standards, is essential. Attention to detail, teamwork, and good communication skills help ensure safe and efficient project completion. These skills are crucial for delivering high-quality insulation work, maintaining safety, and meeting project deadlines in construction and industrial environments.

How to become a union insulator?

To become a union insulator, you typically need to complete an apprenticeship program that combines on-the-job training with classroom instruction, usually lasting 3-4 years. Applicants must meet age and education requirements, pass a skills test or aptitude exam, and often need a valid driver's license; once certified, they can work as a journeyperson insulator in union settings.

What are Union Insulators?

Union Insulators are skilled tradespeople who install and maintain insulation materials on pipes, ductwork, walls, and other mechanical systems to help control temperature, prevent energy loss, and protect against fire or noise. They are members of a labor union, which provides training, job opportunities, and workplace protections. Union Insulators typically work on construction sites, in industrial plants, and in commercial or residential buildings, ensuring that insulation is properly installed to meet safety and efficiency standards.

What Are Union Insulator Jobs?

Union insulator jobs include apprenticeships as well as roles as an insulation installer and foreman. Tradespeople who specialize in insulation can join an organization like the International Association of Heat and Frost Insulators & Allied Workers, a union which protects workers’ rights and promotes safety standards. As an apprentice, you work under the supervision of a senior tradesman and learn to install, remove, and repair insulation in roofs, walls, or around plumbing, HVAC, and mechanical systems. As an insulator or foreman, your duties involve ensuring work is done well and complying with cleanliness and safety standards. Other responsibilities include keeping track of job site materials and generating daily progress and inventory reports.

What are some common challenges Union Insulators face on the job, and how can they be addressed?

Union Insulators often work in environments that require physical stamina and attention to detail, such as construction sites and industrial facilities. Common challenges include working in tight or elevated spaces, exposure to temperature extremes, and handling potentially hazardous materials. These challenges can be managed by adhering strictly to safety protocols, using personal protective equipment, and participating in ongoing safety and skills training provided by the union. Teamwork and communication are also essential for maintaining safety and efficiency on the job.

How much does a union pipe insulator make?

Union pipe insulators typically earn between $20 and $35 per hour, depending on experience, location, and union agreements. Skilled insulators with certifications and experience can earn higher wages and may receive benefits such as health insurance and retirement plans.
More about Union Insulator jobs
What cities are hiring for Union Insulator jobs? Cities with the most Union Insulator job openings:
What are the most commonly searched types of Insulator jobs? The most popular types of Insulator jobs are:
What states have the most Union Insulator jobs? States with the most job openings for Union Insulator jobs include:
What job categories do people searching Union Insulator jobs look for? The top searched job categories for Union Insulator jobs are:
Union Insulator jobs near you
Infographic showing various Union Insulator job openings in the United States as of June 2026, with employment types broken down into 1% As Needed, 1% Full Time, and 98% Part Time. Highlights an 5% Physical, and 95% Hybrid job distribution, with an average salary of $51,119 per year, or $24.6 per hour.

Electrical Engineering Technician

Union Technologies

Dallas, TX • On-site

Full-time

Posted 7 days ago

Job description

Union Technologies is reindustrializing America's defense manufacturing base with a first-of-its-kind Factories-as-a-Stockpile™ model, integrating advanced robotics, manufacturing, and software into sovereign factory systems at scale. Headquartered in Dallas, Texas, UNION is dedicated to restoring America's industrial strength and guaranteeing deterrence for the century ahead.
We recently emerged from stealth with $50M in funding led by top-tier venture investors and strategic partners. Read more in our Press Release
Job Summary:
You are the hands on extension of site electrical engineering at Union Factory 1. You support the Staff Electrical Engineer in keeping forging, machining, and inspection operations running safely and on schedule. The job exists to reduce unplanned electrical downtime, deliver capital project electrical scope, build and wire in house control panels, and keep site documentation up to date.
Day to day, you walk down equipment, redline as built drawings, execute LOTO, support arc flash data collection, build and wire control panels per Staff EE designs, install and commission capital scope, and troubleshoot faults on CNC machines, forging presses, conveyors, and facility power.
Key Responsibilities:
  • Install, maintain, troubleshoot, and repair electrical systems and components across forging, machining, inspection, and facility equipment.
  • Read and apply electrical schematics, ladder logic, P&IDs, and wiring diagrams. Redline them when reality disagrees.
  • Perform preventive and corrective maintenance on motors, VFDs, control circuits, lighting, distribution gear, and grounding systems.
  • Test electrical systems with multimeters, clamp meters, insulation resistance testers, phase rotation meters, and thermal imagers. Log readings in the CMMS.
  • Support PLC and HMI troubleshooting on Rockwell ControlLogix and CompactLogix and on Siemens TIA Portal platforms. Coordinate code changes with controls engineering.
  • Maintain electrical spares inventory. Flag stockouts and assist with purchasing on parts you specify or use.
  • Comply with the NEC, NFPA 70E, NFPA 79, and site electrical standards. Cite the applicable article when asked.
  • Wear required PPE. Stop work and escalate any unsafe condition.
  • Other duties as assigned by the Staff Electrical Engineer or Maintenance Manager.

Minimum Qualifications
  • High school diploma or equivalent.
  • 2 to 5 years of electrical experience in a manufacturing or industrial environment.
  • Demonstrated experience troubleshooting industrial motor circuits and basic controls.
  • Ability to work flexible hours including overtime, weekends, and an on call rotation.
  • Industrial electrical systems: 480V three phase distribution, motor controls, VFDs, control transformers, grounding and bonding.
  • Schematic and wiring diagram reading. Comfortable redlining what you find in the field.
  • Electrical troubleshooting in a production environment. Calm under downtime pressure.
  • Control panel building and wiring per UL 508A and NFPA 79 practice: component mounting, wire duct fill, power and signal segregation, grounding and bonding, terminal block selection, wire labeling.
  • Working knowledge of PLC and HMI platforms (Rockwell and/or Siemens). Able to monitor I/O, safely force outputs when authorized, and interpret fault codes.
  • Electrical safety standards: OSHA 1910 Subpart S, NFPA 70E current edition, NEC.
  • Test equipment: DMM, clamp meter, insulation resistance tester (megger), phase rotation meter, power quality analyzer, thermal imager.
  • Microsoft Office (Excel, Word, Outlook) and CMMS data entry. AutoCAD viewer or full AutoCAD experience for reading and printing drawings.
  • Clear written documentation

Preferred / Bonus Skills
  • Associate/ B.S. degree or technical certificate in electrical, electromechanical, or industrial controls.
  • Journeyman or industrial electrician license.
  • Experience with forging presses, large CNC machine tools, or heavy industrial conveyors.
  • Hands on control panel building experience in a UL 508A shop or industrial maintenance setting.
  • Prior involvement in supporting an Arc Flash Study or NFPA 70E program rollout.
  • Prior involvement in capital project commissioning and startup.

Physical Demands
The physical demands described here are representative of those an employee must meet to perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to:
  • Walk, stand, sit, bend, reach, stoop, kneel, crouch, crawl, and move continually throughout the shift.
  • Lift and carry up to 50 pounds. Occasional overhead lifting required.
  • Climb ladders and work from elevated platforms. Work in confined spaces when permitted.
  • Vision adequate for reading nameplates, drawings, and instrument displays, including peripheral vision, depth perception, and color discrimination for wire identification.
  • Tolerate plant floor conditions: heat near forging operations, noise, vibration, hot metal, moving heavy equipment, and exposure to cutting fluids and oils.
  • Work flexible hours including overtime and weekends to meet customer demands.

Personal Protective Equipment typically required to perform the essential functions of this job will be provided.

Apply