General Laborer - UIC Nappairit
$16 - $20/hr
Erect or dismantle scaffolding, shoring, braces, traffic barricades, ramps, or other temporary ... Control traffic passing near, in, or around work zones. * Dig ditches or trenches, backfill ...
General Laborer - UIC Nappairit
$16 - $20/hr
Erect or dismantle scaffolding, shoring, braces, traffic barricades, ramps, or other temporary ... Control traffic passing near, in, or around work zones. * Dig ditches or trenches, backfill ...
Temporary Traffic Control information
What is temporary traffic control?
Temporary traffic control refers to the use of signs, signals, barricades, flaggers, and other devices or personnel to safely manage the flow of vehicles and pedestrians around construction zones, roadwork, or special events. The goal is to protect both workers and the public by providing clear guidance and minimizing disruptions to normal traffic patterns. Temporary traffic control plans are developed to address specific site conditions and ensure compliance with safety regulations. Workers in this field are trained to set up, monitor, and adjust traffic controls as needed.
What are some common challenges faced by temporary traffic control professionals, and how can they be managed on the job?
Temporary Traffic Control professionals often encounter challenges such as unpredictable traffic patterns, adverse weather conditions, and the need to communicate effectively with both drivers and construction teams. Managing these challenges involves staying alert, following established safety protocols, and adapting quickly to changing environments. Regular training, clear signage, and strong teamwork are key to ensuring safety and efficiency on the job. Collaboration with law enforcement and site supervisors is also essential to address issues as they arise and maintain smooth traffic flow.
What are the key skills and qualifications needed to thrive as a temporary traffic control professional, and why are they important?
To thrive as a Temporary Traffic Control professional, you need a solid understanding of road safety protocols, traffic laws, and often a flagger certification or completion of an approved traffic control training course. Familiarity with traffic control devices, signage, and communication equipment is typically required. Strong attention to detail, situational awareness, and effective communication are critical soft skills in this role. These skills and qualities are essential for ensuring the safety of workers, motorists, and pedestrians in dynamic and potentially hazardous environments.
What is the difference between Temporary Traffic Control vs Flagger?
| Aspect | Temporary Traffic Control | Flagger |
|---|---|---|
| Certifications | Typically requires OSHA and traffic control certifications | Requires OSHA and flagging certifications |
| Work Environment | Works on various construction sites, roadworks, and events | Primarily stationed at traffic sites directing vehicles |
| Employer & Industry Usage | Used by construction companies, municipalities, and contractors | Employed by similar entities for traffic management |
| Common Search & Comparison | Often compared due to overlapping roles in traffic safety | Focuses on directing traffic at specific points |
Temporary Traffic Control encompasses a broad range of activities including setting up signs, barriers, and directing traffic flow, while a Flagger specifically focuses on manually directing vehicles using hand signals. Both roles require similar certifications and are essential for maintaining safety during roadwork or events. The main difference lies in scope: Temporary Traffic Control involves overall site setup, whereas Flagger duties are more specific to manual traffic direction.
Do temporary traffic control flaggers get paid weekly?
Temporary traffic control flaggers are typically paid on a weekly or biweekly basis, depending on the employer and location. Payment schedules can vary, but weekly pay is common in the industry. Overtime and shift differentials may also apply based on the work environment and hours worked.
What are the most commonly searched types of Traffic Control jobs in Alaska?
The most popular types of Traffic Control jobs in Alaska are:
What are popular job titles related to Temporary Traffic Control jobs in Alaska?
For Temporary Traffic Control jobs in Alaska, the most frequently searched job titles are:
What job categories do people searching Temporary Traffic Control jobs in Alaska look for?
The top searched job categories for Temporary Traffic Control jobs in Alaska are:
What cities in Alaska are hiring for Temporary Traffic Control jobs?
Cities in Alaska with the most Temporary Traffic Control job openings:
$16 - $20/hr
Part-time
Posted 4 days ago
Job description
Overview
UIC Nappairit is seeking a General Laborer for a Remote location in Alaska. This position will perform tasks involving physical labor at construction site. Will clean and prepare sites, dig trenches, set braces to support the sides of excavations, assist in concrete placement, and clean up rubble, debris and other waste materials. Will identify and load/offload building materials, machinery, or tools, distributing them to the appropriate locations. May operate hand and power tools of all types: air hammers, earth tampers, cement mixers, wheelbarrows, small mechanical hoists, measuring equipment, and a variety of other equipment and instruments. May assist other craft workers. May perform other duties as assigned. This is a Davis Bacon Act (DBA) position and is estimated to work approximately 60hrs per week.
ResponsibilitiesEssential functions will include:
- Clean or prepare construction sites to eliminate possible hazards.
- Erect or dismantle scaffolding, shoring, braces, traffic barricades, ramps, or other temporary structures.
- Load, unload, or identify building materials, machinery, or tools, distributing them to the appropriate locations.
- Measure, mark, or record openings or distances to layout areas where construction work will be performed.
- Tend pumps, compressors, or generators to provide power for tools, machinery, or equipment or to heat or move materials.
- Mix, pour, or spread concrete, using portable cement mixers and wheelbarrows.
- Control traffic passing near, in, or around work zones.
- Dig ditches or trenches, backfill excavations, or compact and level earth to grade specifications, using picks, shovels, pneumatic tampers, or rakes.
- Provide own transportation to and from worksite.
- Must be willing to work safely and follow all company policies.
- Work independently with minimal supervision and complete assigned daily tasks.
- Work well within a team setting.
- Ability to interact with both co-workers and clients in a courteous and professional manner.
- Must be able to follow directions.
Knowledge and Critical Skills/Expertise:
- Proficient with all hand and power small tools.
- Knowledge of materials, methods, and the tools involved in the construction or repair of houses, buildings, or other structures.
- Knowledge/awareness of safety issues.
- Ability to perform duties and operation of tools of the trade in strict compliance with OSHA rules.
Minimum Qualifications:
- One (1) year of general labor experience.
Physical and Mental Demands:
- Lift/push/pull 50lbs to 100lbs on an occasional basis.
- Lift/push/pull up to 20lbs on a frequent basis.
- Will be required to have the ability to bend, squat, crouch, crawl, and kneel.
- Must have the ability to climb in a safe manner (climbing includes stairs, scaffolding, ladders, and ramps).
- Perform prolonged standing (2-3-hour intervals).
- Able to work at a variety of levels (ex. waist, eye, above head).
- Must have good balance while working on uneven surfaces and maneuvering obstacles.
- Possess sufficient handgrip and coordination to carry and operate tools and equipment.
- Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.
- Able to respond to verbal and audible sounds/commands.
- Able to utilize adequate visual skills.
- Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts.
- Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down.
- Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.
- Ability to turn head from side to side and about the vertical axis.
- Ability to turn body at the waist from side to side and about the vertical axis.
- Ability to reach in all directions.
- Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials.
- Using hands and arms in handling, installing, positioning, moving materials, and manipulating materials.
Working Conditions:
- Ability to withstand extreme temperatures (cold and hot).
- While performing the duties of this job, the employee is regularly exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions.
- The employee is frequently exposed to high, precarious places; fumes or airborne particles.
- The noise level in the work environment is usually very loud.
- The wearing of appropriate personal protective equipment mitigates risks associated with these conditions and is mandatory.
- Work environment is that of a construction site.
- May be working in close proximity to moving equipment.