ZipRecruiter

Log In

1

Temporary Mri Rf Coil Engineer Jobs (NOW HIRING)

Symmetrio

MRI Coil Repair Technician

$70K - $100K/yr

This role is ideal for a hands-on biomedical or RF-focused technician with direct experience ... Collaborate with MRI technologists, biomedical staff, and engineering teams to reduce equipment ...

nudge

MR Physicist

San Francisco, CA · On-site

Develop novel MRI pulse sequences and image reconstruction algorithms that push the envelope of ... Work closely with other MR physicists, an RF coil engineer, our software, mechanical, and ...

Nudge

MR Physicist

San Francisco, CA · On-site

Develop novel MRI pulse sequences and image reconstruction algorithms that push the envelope of ... Work closely with other MR physicists, an RF coil engineer, our software, mechanical, and ...

GE HealthCare

Lead Electrical Engineer - RF

Waukesha, WI · On-site

$160.20K - $167.20K/yr

The RF designs this candidate owns will support critical MRI scanner functionality for signal ... Work with related sub-systems (Tx / Rx coil design, power, cooling, etc) to manage interactions.

Gehc

Lead Electrical Engineer - RF

Waukesha, WI · Hybrid

$160.20K - $167.20K/yr

The RF designs this candidate owns will support critical MRI scanner functionality for signal ... Work with related sub-systems (Tx / Rx coil design, power, cooling, etc) to manage interactions.

ATD Technology LLC

MRI Technician-Travel

Morristown, NJ · On-site

$57 - $59/hr

Position patient on examining table and place specified coil (receiver) such as head coil or knee ... ATD is a full service provider with offerings in Contract, Permanent and Temp-to-Perm staffing ...

ATD Technology LLC

MRI Technician

Morristown, NJ · On-site

$54 - $56/hr

Position patient on examining table and place specified coil (receiver) such as head coil or knee ... ATD is a full service provider with offerings in Contract, Permanent and Temp-to-Perm staffing ...

ATD Technology LLC

MRI Technician-Travel

Morristown, NJ · On-site

$57 - $59/hr

Position patient on examining table and place specified coil (receiver) such as head coil or knee ... ATD is a full service provider with offerings in Contract, Permanent and Temp-to-Perm staffing ...

Belcan

Senior RF Design Engineer

Liberty Township, OH · On-site

$125K - $175K/yr

Senior RF Design Engineer Pay Rate: $125,000 - $175,000 annually Location: Middletown, OH Start ... We offer excellent opportunities for contract, temporary, temp-to-hire, and direct assignments. We ...

next page

Showing results 1-20

People also search for

All JobsMri Rf Coil Engineer JobsTemporary Mri Rf Coil Engineer Jobs

Temporary Mri Rf Coil Engineer information

See salary details

$37K

$117.7K

$183K

How much do temporary mri rf coil engineer jobs pay per year?

As of May 30, 2026, the average yearly pay for temporary mri rf coil engineer in the United States is $117,680.00, according to ZipRecruiter salary data. Most workers in this role earn between $97,500.00 and $139,000.00 per year, depending on experience, location, and employer.

What engineering jobs pay $500,000?

High-level engineering roles such as senior aerospace engineers, petroleum engineers, and certain specialized software engineers can earn $500,000 or more annually, often with extensive experience, advanced certifications, and leadership responsibilities. Executive engineering positions or roles in highly profitable industries tend to have the highest compensation packages.

What is the best job for an electronics and communication engineer?

For an electronics and communication engineer, roles such as MRI RF Coil Engineer are ideal, involving designing and testing radio frequency coils used in MRI machines. These positions require strong knowledge of electromagnetics, circuit design, and often certification in relevant engineering standards. Such jobs are typically found in medical device companies, research institutions, or healthcare technology firms.

What is the difference between Temporary Mri Rf Coil Engineer vs Temporary MRI Technologist?

AspectTemporary Mri Rf Coil EngineerTemporary MRI Technologist
CredentialsEngineering degree, RF coil certificationRadiologic technologist license, ARRT certification
Work EnvironmentResearch labs, medical device manufacturingHospitals, imaging centers
Employer & IndustryMedical device companies, research institutionsHospitals, clinics

While both roles involve MRI technology, the Temporary Mri Rf Coil Engineer focuses on designing and testing RF coils, requiring engineering expertise. In contrast, the Temporary MRI Technologist operates MRI scanners directly to capture images, requiring radiologic credentials. Their work environments and employer types also differ, with engineers working in research and development, and technologists in clinical settings.

What cities are hiring for Temporary Mri Rf Coil Engineer jobs? Cities with the most Temporary Mri Rf Coil Engineer job openings:
What are the most commonly searched types of Mri Rf Coil Engineer jobs? The most popular types of Mri Rf Coil Engineer jobs are:
What states have the most Temporary Mri Rf Coil Engineer jobs? States with the most job openings for Temporary Mri Rf Coil Engineer jobs include:
Temporary Mri Rf Coil Engineer jobs near you

Lead Electrical Engineer - RF Body Coils

Gehc

Florence, SC

Full-time

Posted 12 days ago

Job description

Job Description SummaryLead Electrical & RF (Radiofrequency) Coil Engineer - MRI
Location: Florence, SC
Relocation Benefits: Competitive relocation package available
Why this role matters
At GE HealthCare, we build technology that helps clinicians see more, know more, and do more-so patients can get the care they need, when it matters most. In this role, you'll help advance MRI performance and patient outcomes by designing and improving RF coil and transmit chain components that are central to image quality, reliability, and serviceability. Your work will directly influence the safety, consistency, and accessibility of MRI scanning for patients around the world.
We're looking for a Lead Electrical & RF Coil Engineer who brings strong electrical/RF fundamentals, curiosity, and a collaborative mindset. If you enjoy solving meaningful problems with supportive, cross functional partners-and want room to grow technically and as a leader-this could be a great fit.
We encourage you to apply even if you don't meet every preferred qualification. Many successful candidates bring a blend of experiences, and we value potential, learning agility, and teamwork.
Role overview
The Electrical & RF Coil Engineer for MRI (Magnetic Resonance Imaging) understands the function and design of RF circuits, RF electronics, and antennas-and applies that knowledge to design high power body transmit/receive coils and low power receive only coils. As a Lead Engineer, you will design and implement RF solutions that optimize cost, manufacturability, reliability, and serviceability of the final product. You will develop new component and product designs for the RF Body Coil and Transmit Chain components, and you will also own and maintain parts of the existing installed base.Job Description

What you will do (key responsibilities)

You will contribute across the full product lifecycle-partnering closely with engineering, manufacturing, suppliers, and field teams to deliver robust designs.

  • Design and develop RF electrical components and interconnects for MRI body coils, spanning both highpower and lowpower applications.
  • Perform design and analysis of RF transmit/receive components and printed circuit board (PCB) elements (e.g., birdcage antenna structures, circuit boards).
  • Use RF and electromagnetic (EM) simulation and design tools to create efficient, reliable, and manufacturable designs.
  • Use PCB design software to create circuit boards intended for RF applications.
  • Engage in all phases of new product development, including: concept development, architecture, documentation, detailed design, prototyping, testing, cost considerations, supplier interfaces, manufacturing introduction, and service support.
  • Collaborate with crossfunctional teams to ensure product performance, quality, reliability, and smooth integration into the broader MRI system.
  • Participate in-and when needed, lead-prototype build activities to ensure builds align with design intent; recommend design experiments and tests to validate performance and drive improvements.
  • Tackle complex, sometimes ambiguous technical challenges by performing troubleshooting (bench level and system level) across multiple variables to identify root cause and implement lasting solutions.
  • Support field issues through troubleshooting and rootcause investigation to help drive timely problem resolution and improve the installed base experience.
  • Develop robust designs for new or existing products that can be produced economically and aligned to established project timelines.
  • Provide creative, practical solutions to unstructured product and system design issues raised by both factory and field partners.
  • Study key component interactions (e.g., magnet / gradient / body coil) within MRI systems and propose solutions that improve overall system performance.

What success looks like

  • You deliver designs that balance performance, reliability, cost, manufacturability, and serviceability-and you communicate tradeoffs clearly.
  • You build strong partnerships across disciplines and help teams move forward with clarity and shared ownership.
  • You bring structure to complex problems-using data, testing, and simulation to guide decisions.
  • You contribute to a culture where people feel respected, supported, and empowered to do their best work.

Required qualifications

  • Bachelor's degree in Electrical Engineering (or equivalent technical degree).
  • Minimum 2 years of engineering experience.
  • Demonstrated experience in electrical design and/or circuit board (PCB) design.
  • Experience using electrical circuit and/or EM (electromagnetic) simulation tools.

Preferred qualifications

  • Experience with Electrical CAD software (e.g., Cadence) and computational/simulation tools (e.g., MATLAB, XFdtd).
  • Working understanding of MRI fundamentals, RF coil design, and electromagnetics.
  • Experience with MRI system operation.
  • Experience with numerical analysis tools and optimization methods.
  • Handson hardware experience with mechanical systems and components.
  • Comfort collaborating with crossfunctional, multidisciplinary teams.
  • Demonstrated leadership, teamwork, and interpersonal skills (this can be through technical leadership, mentoring, project ownership, or informal team leadership).
  • Strong written and verbal communication skills.

#LI-LRG1

#LI-Onsite

We will not sponsor individuals for employment visas, now or in the future, for this job opening.

GE HealthCare offers a great work environment, professional development, challenging careers, and competitive compensation. GE HealthCare is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

GE HealthCare will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable).

While GE HealthCare does not currently require U.S. employees to be vaccinated against COVID-19, some GE HealthCare customers have vaccination mandates that may apply to certain GE HealthCare employees.

Relocation Assistance Provided: Yes

Apply