1

Sign Installer Apprentice Jobs in Minnesota (NOW HIRING)

Operating Engineer

Bloomington, MN · On-site

$69K - $94K/yr

Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of ... apprentice program or trade school preferred IMPORTANT EXPERIENCE • 5+ years of related work ...

Operating Engineer

Bloomington, MN

$69K - $94K/yr

Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of ... apprentice program or trade school preferred IMPORTANT EXPERIENCE 5+ years of related work ...

Operating Engineer

Eden Prairie, MN · On-site

$70K - $95K/yr

Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of ... apprentice program or trade school preferred IMPORTANT EXPERIENCE 5+ years of related work ...

Operating Engineer

Bloomington, MN

$69K - $94K/yr

Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of ... apprentice program or trade school preferred IMPORTANT EXPERIENCE 5+ years of related work ...

Operating Engineer

Eden Prairie, MN · On-site

$70K - $95K/yr

Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of ... apprentice program or trade school preferred IMPORTANT EXPERIENCE 5+ years of related work ...

Operating Engineer

Bloomington, MN

$69K - $94K/yr

Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of ... apprentice program or trade school preferred IMPORTANT EXPERIENCE 5+ years of related work ...

Operating Engineer

Eden Prairie, MN · On-site

$70K - $95K/yr

Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of ... apprentice program or trade school preferred IMPORTANT EXPERIENCE 5+ years of related work ...

Operating Engineer

Eden Prairie, MN · On-site

$70K - $95K/yr

Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of ... apprentice program or trade school preferred IMPORTANT EXPERIENCE 5+ years of related work ...

Operating Engineer

Bloomington, MN · On-site

$69K - $94K/yr

Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of ... apprentice program or trade school preferred IMPORTANT EXPERIENCE 5+ years of related work ...

Maintenance Mechanic

Arden Hills, MN · On-site

$33.93 - $40.39/hr

... License or higher Sign-on Bonus : $1000 after 30 days $500 after 6 months $500 after 1 year ... Highly-qualified candidates would possess a technical degree or apprenticeship certification and ...

next page

Showing results 1-20

Sign Installer Apprentice information

What are some common challenges a Sign Installer Apprentice may face during their training period?

As a Sign Installer Apprentice, you may encounter challenges such as adapting to working at heights, learning to safely handle specialized tools and equipment, and interpreting technical drawings or blueprints accurately. Weather conditions can also impact outdoor installations, requiring flexibility and a strong commitment to safety protocols. Additionally, effective communication with team members and clients is essential to ensure installations meet specifications and comply with local regulations.

What does a Sign Installer Apprentice do?

A Sign Installer Apprentice assists experienced sign installers in putting up, maintaining, and removing a variety of signs, such as billboards, storefront signs, and digital displays. Their duties include preparing materials, operating tools and equipment, following safety protocols, and learning to read installation plans. Apprenticeships provide hands-on training and experience, helping individuals develop the skills needed to eventually become fully qualified sign installers.

What is the difference between Sign Installer Apprentice vs Sign Installer?

AspectSign Installer ApprenticeSign Installer
CredentialsMay require basic OSHA training, on-the-job trainingTypically requires OSHA certification, specialized training
Work EnvironmentLearning environment, supervised tasks, outdoor/indoorFull responsibility for installations, outdoor/indoor
Job ResponsibilitiesAssisting with installations, learning tools and techniquesPerforming installations independently, troubleshooting

The Sign Installer Apprentice is in training, gaining skills under supervision, while the Sign Installer performs full installations independently. Apprenticeship prepares individuals for a career as a Sign Installer by building experience and certifications.

What are the key skills and qualifications needed to thrive as a Sign Installer Apprentice, and why are they important?

To thrive as a Sign Installer Apprentice, you need basic knowledge of construction techniques, mechanical aptitude, and a high school diploma or equivalent. Familiarity with power tools, lifting equipment, and safety protocols, as well as OSHA certification, is often required. Strong attention to detail, teamwork, and effective communication skills help ensure safe and accurate installations. These competencies are essential for delivering quality work, maintaining safety standards, and effectively collaborating with colleagues on job sites.
What are the most commonly searched types of Sign Installer jobs in Minnesota? The most popular types of Sign Installer jobs in Minnesota are:
What are popular job titles related to Sign Installer Apprentice jobs in Minnesota? For Sign Installer Apprentice jobs in Minnesota, the most frequently searched job titles are:
What job categories do people searching Sign Installer Apprentice jobs in Minnesota look for? The top searched job categories for Sign Installer Apprentice jobs in Minnesota are:
What cities in Minnesota are hiring for Sign Installer Apprentice jobs? Cities in Minnesota with the most Sign Installer Apprentice job openings:
Infographic showing various Sign Installer Apprentice job openings in Minnesota as of May 2026, with employment types broken down into 100% Full Time. Highlights an 100% In-person job distribution.
Operating Engineer

Operating Engineer

Cushman & Wakefield

Bloomington, MN • On-site

$69K - $94K/yr

Full-time

Medical, Dental, Vision, Life, Retirement

Posted 10 days ago


Cushman & Wakefield rating

7.7

Company rating: 7.7 out of 10

Based on 150 frontline employees who took The Breakroom Quiz

70th of 153 rated real estate companies


Job description

Job Title
Operating Engineer
Job Description Summary
Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties
Job Description
ESSENTIAL FUNCTIONS AND RESPONSIBILITIES
• Perform all plumbing, electrical, or HVAC requirements of the building(s)
• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.
• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings
• Verify field conditions and perform any necessary repairs or adjustments
• Monitor Energy Management
• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property
• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)
• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.
• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris
• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management
• Document and report activities to supervisor
• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns
• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits
• Complete all required C&W Safety Training as scheduled annually
• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours
KEY COMPETENCIES
• Technical Proficiency
• Initiative
• Flexibility
• Multi-Tasking
• Sense of Urgency
IMPORTANT EDUCATION
• High School Diploma of GED Equivalent
• Graduate of apprentice program or trade school preferred
IMPORTANT EXPERIENCE
• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting
ADDITIONAL ELIGIBILITY QUALIFICATIONS
• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)
• May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements
• Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)
• Basic Computing Skills in Outlook, Excel & Word
• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.
• Knowledgeable in energy management systems, techniques and operations.
• Thorough knowledge in all building systems operations, maintenance and repair.
May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties
WORK ENVIRONMENT
This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices
• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine
• Involves movement between departments, floors, and properties to facilitate work
• Ability to speak clearly so others can understand you
• Ability to read and understand information presented orally and in writing
• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics
OTHER DUTIES
This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.
Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements.
The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications.
The company will not pay less than minimum wage for this role.
The compensation for the position is: $31.45 - $37.00
Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated.
In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email Accommodations@cushwake.com. Please refer to the job title and job location when you contact us.
INCO: "Cushman & Wakefield"

What Cushman & Wakefield employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom