ZipRecruiter

Log In

1

Shutdown Instrument Technician Jobs (NOW HIRING)

Kinder Morgan

I&E Tech - CO2

Snyder, TX · On-site

... emergency shutdown, etc. Working with facility engineers, the instrument technician will provide input to optimize the systems and ensure appropriate regulatory requirements and records are ...

Kinder Morgan inc

I&E Tech - CO2

Snyder, TX · On-site

... emergency shutdown, etc. Working with facility engineers, the instrument technician will provide input to optimize the systems and ensure appropriate regulatory requirements and records are ...

TotalEnergies

Analyzer Technician

Port Arthur, TX · On-site

... i.e. startup/shutdown and safe work procedures. * Produce reports, project documentation ... Two-year Analyzer or Instrument Technician Degree, or equivalent education; OR * High School ...

Linde

I&E Technician

Phoenix, AZ · On-site

Utilize analytical skills, instrument trends, alarm logs, diagnostic data, and root cause analysis ... Support plant startup, shutdown, turnaround, and commissioning activities while maintaining ...

Linde Group

I&E Technician

Phoenix, AZ

Utilize analytical skills, instrument trends, alarm logs, diagnostic data, and root cause analysis ... Support plant startup, shutdown, turnaround, and commissioning activities while maintaining ...

Linde

I&E Technician

Phoenix, AZ · On-site

Execute startup and shutdown activities and assist with process equipment operations * Further, you ... Evaluate diagnostic data, equipment performance trends, failure modes, instrument trends, alarm ...

Linde Group

I&E Technician

Phoenix, AZ · On-site

Execute startup and shutdown activities and assist with process equipment operations * Further, you ... Evaluate diagnostic data, equipment performance trends, failure modes, instrument trends, alarm ...

Linde

I&E Technician

Phoenix, AZ · On-site

Support plant startup, shutdown, turnaround, and commissioning activities while maintaining ... meters, and instrument calibration equipment * You have working knowledge of electricity ...

CVR Energy, Inc.

Instrument Engineer

Wynnewood, OK · On-site

... emergency shutdown systems * Provide ongoing technical support to operations and maintenance ... and Technicians to broaden knowledge and experience * Embrace positive change, promote safety ...

Cvr Energy, Inc.

Instrument Engineer

Wynnewood, OK · On-site

... emergency shutdown systems * Provide ongoing technical support to operations and maintenance ... and Technicians to broaden knowledge and experience * Embrace positive change, promote safety ...

Linde

I&E Technician

Niagara Falls, NY · On-site

$53K - $78K/yr

And you will support startup, shutdown, and operation of process plant equipment * Calibrate and ... Proficiency using I/E hand tools, meters, instrument calibration equipment, and related testing ...

next page

Showing results 1-20

All JobsShutdown Instrument Technician Jobs

Shutdown Instrument Technician information

See salary details

$15

$30

$46

How much do shutdown instrument technician jobs pay per hour?

As of Jul 16, 2026, the average hourly pay for shutdown instrument technician in the United States is $30.16, according to ZipRecruiter salary data. Most workers in this role earn between $23.32 and $35.82 per hour, depending on experience, location, and employer.

What are the key skills and qualifications needed to thrive in the Shutdown Instrument Technician position, and why are they important?

To thrive as a Shutdown Instrument Technician, you need a solid understanding of instrumentation, process control systems, and industrial safety standards, often acquired through a technical diploma or equivalent experience. Familiarity with calibration tools, PLCs (Programmable Logic Controllers), and adherence to safety certifications such as OSHA or site-specific training is essential. Strong problem-solving skills, attention to detail, and the ability to work efficiently under pressure as part of a team are important soft skills in this role. These competencies are critical because shutdowns are time-sensitive, high-stakes periods where precise and safe work directly impacts plant reliability and operational success.

What is a Shutdown Instrument Technician job?

A Shutdown Instrument Technician is responsible for inspecting, testing, calibrating, and maintaining instrumentation and control systems during plant or facility shutdowns. Their role ensures that equipment functions accurately and safely before operations resume. They work with pressure gauges, transmitters, control valves, and other devices to troubleshoot and repair faults. This job requires adherence to safety protocols, technical expertise, and the ability to work under tight deadlines.

What are the typical responsibilities of a Shutdown Instrument Technician during a plant turnaround or shutdown?

During a plant shutdown or turnaround, a Shutdown Instrument Technician is responsible for inspecting, calibrating, repairing, and replacing various instrumentation and control devices used in industrial processes. Their daily tasks often include testing sensors, transmitters, and control loops, troubleshooting malfunctions, and ensuring all equipment meets safety and operational standards before start-up. Technicians typically work closely with engineers, operations staff, and other maintenance teams to coordinate activities and minimize downtime. The role requires flexibility and a readiness to work extended hours to meet tight project deadlines, as the safe and timely completion of shutdown tasks is crucial for overall plant performance.

More about Shutdown Instrument Technician jobs
What are the most commonly searched types of Shutdown Instrument Technician jobs? The most popular types of Shutdown Instrument Technician jobs are:
What states have the most Shutdown Instrument Technician jobs? States with the most job openings for Shutdown Instrument Technician jobs include:
What job categories do people searching Shutdown Instrument Technician jobs look for? The top searched job categories for Shutdown Instrument Technician jobs are:
Shutdown Instrument Technician jobs near you
Infographic showing various Shutdown Instrument Technician job openings in the United States as of July 2026, with employment types broken down into 2% As Needed, 78% Full Time, 17% Part Time, 1% Temporary, and 2% Contract. Highlights an 93% Physical, 1% Hybrid, and 6% Remote job distribution, with an average salary of $62,743 per year, or $30.2 per hour.
I&E Tech - CO2

I&E Tech - CO2

Kinder Morgan

Snyder, TX • On-site

Full-time

Posted 2 days ago

Kinder Morgan rating

8.5

Company rating: 8.5 out of 10

Based on 92 frontline employees who took The Breakroom Quiz

14th of 52 rated energy and utility

Job description

What We Are Looking For
The successful candidate will ensure instrumentation control systems and automation systems are calibrated and functioning properly. Accountable for maintaining and safely operating all facility instrumentation, measurement devises and final control elements, such as process control, safety shutdown, fire detection and suppression, gas detection, emergency shutdown, etc. Working with facility engineers, the instrument technician will provide input to optimize the systems and ensure appropriate regulatory requirements and records are maintained. This position will require the ability to assess, maintain, repair and monitor control, analytical systems, and distributed control systems. The instrument technician should be skilled in maintaining the performance of temperature, pressure, flow and level measurement control equipment, as well as valves, hydraulic control panels and single loop controllers. You will be subject to the on-call schedule and must respond to emergency call outs as scheduled. Perform housekeeping and general maintenance as required. Perform any other functions as trained, requested and instructed by supervision. This position requires a strong electrical and mechanical aptitude; the candidates must be able to demonstrate knowledge and skill through experience and /or training.
What You Will Do
  • Manage spare/critical parts inventory keeping necessary amounts of inventory in stock to reduce any delays or failures.
  • Properly record and complete I&E maintenance reports and service records.
  • Maintain a clean work space by removing trash and debris from all areas of responsibility including structures, offices, restrooms, break rooms, vehicles, etc.
  • Maintain good and open communication with operators, supervision, and managers via radio and other proper means.
  • Completion of maintenance inspections, checklists, and PMs.
  • Participation in Process Safety Management with a heavy emphasis on Instrument and Electrical integrity.
  • Participation in safety and environmental training and attendance to daily briefings.
  • Observation of company safety and operational procedures and policies. Promptly reporting of any observed unsafe conditions to management.
  • Tasks involve the use of various mechanical, measuring & testing devices, hand and other tools, computers and other equipment, and driving company vehicles. Duties involve climbing tank stairs, manually opening and closing large valves, regularly lifting 40 to 50 lbs. and occasionally moving or lifting up to 100 lbs., and other physical activities.
  • Requires the use of computer / motor controlled equipment and / or the manual turning of valves throughout the process area.
  • Provides HAZWOPER and Resource Conservation and Recovery Act support and is involved in emergency response activities.
  • Drive company vehicle to work sites away from base location.
  • Perform other duties as assigned.

Essential duties and responsibilities:
  • Successful completion of broad I&E maintenance tasks
  • Maintain the asset safely and in compliance with regulations and corporate policies.
  • Mentor fellow employees when the opportunity presents itself.
  • Participating in project planning including P&ID development, Cause & Effect development, & Control System design.
  • Maintaining and optimizing SCADA communications systems and programmable logic controllers.
  • Able to troubleshoot using P&IDs and loop diagrams.
  • Calibrates, tests, inspects, operates, troubleshoots and maintains electronic devices (PLCs, DCSs, transmitters, etc.)
  • Working knowledge of Microsoft Office applications (Word, Excel, PowerPoint and Outlook)
  • The ability to work independently, as a team leader, or as a team member within the maintenance group.
  • Provide oversight of on-site contractors and provide assurance of competency, safety, and productivity.
  • Maintain and update all system documentation including loop diagrams, panel drawings and all relevant discipline control documents.
  • Assist in the development of I&E maintenance procedures and annual I&E maintenance budgets.
  • Continued implementation and enhancement of preventative maintenance programs.
  • Continuously optimize, evaluate and effectively use company and contractor resources and personnel
  • Responsible for adding to and maintaining an approved contractor list.
  • Analyze purchases and invoices and identify improvement opportunities.
  • Handle regulatory issues as required.
  • Evaluation of company and contractor safety practices and performance.
  • Required to carry a cell phone and be available to respond during working and non-working hours.
  • Perform other duties as assigned.

What You Need
Education:
  • High School diploma or equivalent

Experience / specific knowledge:
  • Petroleum transportation, storage and distribution, electrical and or mechanical experience is a plus.
  • Must have general knowledge of 4-20ma control and associated transmitters.
  • Knowledge in control network architecture

Competencies, skills and abilities:
  • Electrical and/or Mechanical aptitude.
  • Basic computer skills. (Microsoft Word, Excel and Email). Send and receive email, perform inventory accounting, and enter repair work orders, etc.
  • Ability to accept supervision / direction and work cooperatively with other people.
  • Good oral and written communications in English. Ability to read and understand English.
  • Ability to perform mathematical calculations in the performance of some duties. Calculators and computers are available.
  • Ability & dependability to perform job duties with little or no supervision.
  • Ability to recognize, define and effectively resolve problems individually or collectively within a group and in ambiguous situations.
  • Must satisfactorily complete all training including passing evaluations & tests.
  • Successful completion of background check and drug screen, post offer.
  • Required to carry a company provided cell phone, and be available to respond during working and none working hours based on business needs.
  • Must be able to work with a team, take direction from supervisor(s) and lead personnel, focus attention on details, follow work rules, and adhere to established work schedules.

Physical demands:
  • Ability to manually open and close valves, unload arriving material, lift, carry / move weights regularly weighing 40 -50 lbs. and occasionally up to 100 lbs.
  • Ability to walk on paved, gravel or other uneven surfaces.
  • Ability to manipulate and use hand tools in performance of various maintenance functions.
  • Ability to see to perform various administrative and field operator and maintenance tasks.
  • Ability to stand; walk, sit, ascend / descend stairs/ladders; use hands to finger, handle, or feel objects, tools, or controls, reach with hands and arms; climb or balance; stoop, kneel, or crouch; talk and hear.
  • Must be capable of climbing heights to maintain equipment.

Working conditions:
  • Work schedule as necessary (days, afternoon / evening, night shifts) including overtime and callouts as may be necessary, including weekends and holidays. Work rotating shift schedules that operate 24 hours/ day, 7 days/ week on static work sites
  • Work outside in all weather conditions in daylight and darkness.

Preferred education, experience, certifications, competencies, skills and abilities:
  • Relevant 2 year Associate Degree or 4 year degree.
  • Associates Degree in a technical field, or equivalent skills and experience.
  • Prior experience in petroleum industry, chemical process, power plant, electrical and or mechanical experience
  • Work experience in natural gas industry instrumentation, electronics, and control systems.
  • Understanding of process controls and gas processing fundamentals.
  • Knowledge and experience in safe handling practices of flammable gases, liquids and high pressure systems.
  • Knowledge and experience within a Process Safety Management facility.
  • Proficient (perform with limited assistance) with Microsoft Excel, Word, PowerPoint, & Outlook
  • 3+ years direct experience reading instrumentation and electrical diagrams.
  • 3+ years direct experience with electrical controls, electrical distribution systems and motor controls
  • 3+ years direct experience with SCADA/PLC/DCS/Pneumatic controlled loops with the ability to troubleshoot an array of problems associated with the equipment.

Why Join Kinder Morgan
Kinder Morgan is a large energy infrastructure company operating in North America. Access to reliable, affordable energy is a critical component for improving lives around the world. We are committed to providing energy transportation and storage services in a safe, efficient, and environmentally responsible manner for the benefit of the people, communities, and businesses we serve.
Kinder Morgan provides equal employment opportunity to all employees and applicants for employment without regard to race, color, religion, sex, pregnancy, childbirth and related medical conditions, gender (including gender identity and expression), sexual orientation, national origin, ancestry, citizenship status, age, physical or mental disability, genetic information, marital status, military or veteran status, family status, status as an individual authorized to work in the U.S., or any other status protected by law.
For more information about Kinder Morgan, our culture, opportunities available, and to join our Talent Community, please visit our careers site at www.kindermorgan.com.

What Kinder Morgan employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Kinder Morgan logo

About Kinder Morgan

Sourced by ZipRecruiter

Kinder Morgan is moving the fuels of today for the energy of the future. From the natural gas that heats your home to the gasoline that fuels your vehicle, our pipeline and terminal assets provide the necessary infrastructure to meet today's growing global energy demand and play a key role in the low-carbon energy transition of the future.

Industry

Oil and gas extraction

Company size

10,000+ Employees

Headquarters location

Houston, TX, US

Year founded

1997

Social media

FacebookTwitter

View All Kinder Morgan Jobs

Apply