ZipRecruiter

Log In

1

Rf Module Design Engineer Jobs in Florida (NOW HIRING)

HEICO

RF/Analog Design Engineer

Longwood, FL

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Analog Modules, Inc., a subsidiary of HEICO Corporation, designs and manufactures a wide range of ... The RF/Analog Design Engineer responsibilities include, but are not limited to the following:

Heico

RF/Analog Design Engineer

Longwood, FL · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Analog Modules, Inc., a subsidiary of HEICO Corporation, designs and manufactures a wide range of ... The RF/Analog Design Engineer responsibilities include, but are not limited to the following:

Socket.dev

Principal RF Design Engineer

Clearwater, FL · On-site

$140 - $230/hr

  • Medical

  • Dental

  • Vision

  • Retirement

  • PTO

We are seeking a Principal RF Design Engineer to join our team at our Clearwater, FL location. This ... modules, power supply modules, antennas, and related RF components in collaboration with ...

New

Raytheon

Senior RF Subsystems Engineer

Orlando, FL

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Design, test, and integrate RF sensors and subsystems across frequencies from MHz through ... modules, and/or monolithic microwave integrated circuits (MMICs). * Experience performing Link ...

Raytheon

Senior RF Subsystems Engineer

Miami, FL

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Design, test, and integrate RF sensors and subsystems across frequencies from MHz through ... modules, and/or monolithic microwave integrated circuits (MMICs). * Experience performing Link ...

Raytheon

Senior Principal RF Subsystems Engineer

Orlando, FL

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Specify, design, and test advanced RF sensors and subsystems across frequencies from MHz through ... RF modules, and monolithic microwave integrated circuits (MMICs). * Experience performing Link ...

Raytheon

Senior Principal RF Subsystems Engineer

Miami, FL

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Specify, design, and test advanced RF sensors and subsystems across frequencies from MHz through ... RF modules, and monolithic microwave integrated circuits (MMICs). * Experience performing Link ...

Raytheon

Principal RF Design Engineer

Orlando, FL

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Work in a lab to accomplish component characterization as well as module verification and ... Experience with RF design and fabrication * Experience with RF testing and troubleshooting

Raytheon

Principal RF Design Engineer

Miami, FL

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Work in a lab to accomplish component characterization as well as module verification and ... Experience with RF design and fabrication * Experience with RF testing and troubleshooting

Qorvo, Inc.

Staff Design Engineer

Apopka, FL · On-site

To work in a team by contributing one's RF skills to integrated module designs. * To continuously ... Engineering or Physics with an additional 3-5+ years design experience is required. * Experience ...

Qorvo, Inc.

Staff Design Engineer

Apopka, FL · Hybrid

To work in a team by contributing one's RF skills to integrated module designs. * To continuously ... Engineering or Physics with an additional 3-5+ years design experience is required. * Experience ...

Raytheon

RF Design Engineer II

Miami, FL

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

... engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Effector RF Design ...

Raytheon

RF Design Engineer II

Orlando, FL

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

... engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Effector RF Design ...

Qorvo, Inc.

Sr Filter Design Engineer

Apopka, FL · On-site

$91K - $125K/yr

In this position, you will have the unique opportunity to work among a team of expert in RF devices ... module performance through highly sophisticated co-design and integration technique. Our ...

previous pagenext page

Showing results 21-40

All JobsRf Module Design Engineer JobsRf Module Design Engineer Jobs in Florida

Rf Module Design Engineer information

What does an RF module design engineer do?

An RF Module Design Engineer specializes in designing, developing, and testing radio frequency (RF) modules used in a variety of wireless communication devices. They are responsible for creating circuit layouts, selecting components, and ensuring the modules meet performance, reliability, and regulatory standards. Their work often involves simulation, prototyping, and troubleshooting to optimize signal integrity and minimize interference. RF Module Design Engineers collaborate closely with hardware, software, and testing teams to integrate their modules into larger systems. This role is essential in industries such as telecommunications, aerospace, and consumer electronics.

What is the difference between Rf Module Design Engineer vs RF System Engineer?

AspectRf Module Design EngineerRF System Engineer
CredentialsBachelor's or Master's in Electrical Engineering, RF certificationsBachelor's or Master's in Electrical or RF Engineering, RF certifications
Work EnvironmentDesign labs, R&D departments, manufacturing facilitiesSystem integration labs, testing environments, R&D teams
Industry UsageWireless device manufacturing, telecom, consumer electronicsWireless networks, telecom infrastructure, system-level design

Both roles require strong RF engineering knowledge and similar educational backgrounds. The Rf Module Design Engineer focuses on designing and developing RF modules, while the RF System Engineer works on integrating RF components into complete systems. Understanding these differences helps in choosing the right career path or job search focus.

What are the key skills and qualifications needed to thrive as an RF module design engineer, and why are they important?

To thrive as an RF Module Design Engineer, you need strong expertise in RF circuit design, electromagnetic theory, and a relevant engineering degree, such as electrical or electronics engineering. Familiarity with tools like ADS, HFSS, and network analyzers, plus knowledge of industry standards and certifications such as IPC, is highly valued. Attention to detail, problem-solving abilities, and effective communication are crucial soft skills for collaborating with cross-functional teams and troubleshooting complex issues. These competencies ensure the development of high-performance, reliable RF modules that meet stringent industry requirements.

What are some common challenges faced by an RF module design engineer during the product development cycle?

RF Module Design Engineers often encounter challenges such as minimizing interference and signal loss, ensuring compliance with international wireless standards, and integrating modules into compact device enclosures without sacrificing performance. Balancing trade-offs between power consumption, cost, and performance is also a frequent consideration. Collaboration with cross-functional teams, such as PCB layout engineers and system architects, is essential to address these challenges and deliver robust, manufacturable designs.

What are popular job titles related to Rf Module Design Engineer jobs in Florida?

For Rf Module Design Engineer jobs in Florida, the most frequently searched job titles are:

What job categories do people searching Rf Module Design Engineer jobs in Florida look for?

The top searched job categories for Rf Module Design Engineer jobs in Florida are:

What cities in Florida are hiring for Rf Module Design Engineer jobs?

Cities in Florida with the most Rf Module Design Engineer job openings:

Rf Module Design Engineer jobs near you

RF/Analog Design Engineer

HEICO

Longwood, FL

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted 27 days ago

Job description

Analog Modules, Inc., a subsidiary of HEICO Corporation, designs and manufactures a wide range of analog electronic products for the laser and electro-optics industries. These products serve applications in medical, military, scientific, and industrial markets.

Our products include laser diode drivers, pockels cell drivers, laser power supplies, capacitor charging power supplies, CW arc lamp power supplies, pulsed flash lamp drivers, simmer supplies, laser rangefinder receivers, laser spot trackers, photodetector-amplifier modules, HV bias supplies, fiber optic links, fast peak pulse stretchers, transimpedance amplifiers, voltage amplifiers and logarithmic amplifiers.

Analog Modules, Inc. is currently recruiting for the position of RF/Analog Design Engineer.

TheRF/Analog Design Engineer responsibilities include, but are not limited to the following:
  • Designs and develops high speed analog products for electro-optics, laser electronics, and other applications using computer assisted engineering, design software, and customer guidelines.
  • Supports existing product lines with required modifications.
  • Updatesproducts as needed by manufacturing, testing, and quality control departments.
  • Manages assigned projects to guarantee compliance with required specifications within the project schedule.
  • Ensures that budgets of time and raw materials are not exceeded.
  • Provides support in the development of project and product specifications and schedules.
  • Designs and develops electronic assemblies with the aid of hand tools, soldering iron, and computer design software
  • Writes documentation and creates schematics for products. Provides documentation to drafting and assists in drawing creation and review as required.
  • Responsible for design verification testing and acceptance of all assigned project prototypes and first articles.
  • Performs required testing and or supervises assigned technicians and prototype assemblers in testing and fabrication of product.
  • Discusses proposed changes in design with manufacturing and quality control departments to improve manufacturing procedures.
  • Develops acceptance test procedures, design development plans and budgets/schedules, test plans, and design verification tests (DVT) and reports for assigned products and projects.
  • Reviews test results and documentation prior to shipment.
  • Reviews customer returns and repairs for assigned products.
  • Applies advanced mathematical concepts and operations with logical or scientific thinking to solve a wide range of intellectual and practical problems.
  • Provides insights to other engineering personnel regarding non-assigned projects.
  • Assists technical sales personnel with project costs by estimating time and raw materials needed on a per job basis.
  • Troubleshoots with customers to resolve technical questions and ensure all customer specifications have been met.
  • Identifies and prepares requisitions, materials, tools, and test equipment for specific jobs.
  • Bachelor of Science in Electrical Engineering
  • Minimum of six (6) years RF Engineering experience required. MSEE preferred.
  • Proficient in electronics engineering design, testing, and documentation.
  • Strong understanding of analog and RF electronics design. Proficiency in higher frequency techniques including network analysis and simulation is desired.
  • Low noise analog design and testing experience is required.
  • Background and design expertise in electro-optic receivers and ultra-fast laser drivers is desired.
  • Knowledge of circuit board electrical layout techniques and EMI effects are essential.
  • Ability to manage multiple projects simultaneously, successfully setting priorities to accomplish goals.
  • Basic computer skills are essential.
  • A wide degree of creativity and latitude is necessary.
  • Analog Modules, Inc. is located in Longwood, Florida, and the job must be performed onsite. Relocation assistance may be offered.
  • This position requires use of information or access to hardware, which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as aU.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

Benefits

Analog Modules, Inc. offers a competitive salary, medical, dental, and vision insurance, company paid life insurance, company paid short term and long term disability insurance, equity builder, and a 401k with company match. Critical illness and accident insurance are also available.

Our Team Members work a 9/80 schedule, which means our workweek splits on Friday. Full-time Team Members work 9 hours per day Monday - Thursday and 8 hours on Friday one week of our pay period and the following week they work 9 hours per day Monday - Thursday and have that Friday off. This allows Team Members to enjoy a three-day weekend twice a month.

We also offer generous paid time off benefits.

Apply