Remote Steam Engineer Jobs (NOW HIRING)

Summary
You will serve as a MECHANICAL ENGINEER in the NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION SUPPORT EQUIPMENT & ALRE GROUP of NAVAIRWARCENADLKE.
Learn more about this agency
Duties
Help

• You will develop and execute comprehensive test plans, directives, and schedules for EMALS and Steam Catapult systems.
• You will provide detailed technical assessments and recommendations to the PMT and ALRE Department leadership
• You will Lead test engineering efforts for AAG and MK7 systems across multiple test sites (e.g., JCTS, RALS) and ship hulls
• You will develop and execute comprehensive test plans, directives, and schedules for AAG and MK7 systems
• You will provide technical assessments to the PMT and ALRE Department leadership of NAWCAD equipment under test including writing of technical reports to support the test and evaluation efforts.
• You will communicate and coordinate with outside programs and/or agencies as required to ensure that ETL test requirements have been fully verified prior to system fielding
• Your responsibilities will depend on the position you are applying for. the positions are EMALS/Steam Catapult, AAG/MK7, and ETL Test Engineer positions

Requirements
Help
Conditions of employment

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Functional Area and Tier assigned to the position, along with Continuous Learning (CL) points, are required within established timeframes.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.

Qualifications
Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector as a professional MECHANICAL ENGINEER. Specialized experience must demonstrate the following: Specialized to support either the Electromagnetic Aircraft Launch System (EMALS) and Steam Catapult systems, the Advanced Arresting Gear (AAG) and MK7 systems, or the Environmental Test Laboratory (ETL) within the Naval Air Warfare Center Aircraft Division (NAWCAD) Lakehurst. The incumbent will serve as a technical expert in the design, development, testing, and evaluation of these systems, both land-based and shipboard.
The positions are:
Environmental Test Laboratory Test (ETL) Engineer will be responsible for leading and executing all test engineering efforts across the ALRE/SE product lines in support of environmental requirements and testing. The ETL test engineer is responsible for all environmental test and evaluation efforts for NAWCAD as well as capability improvement of the lab to keep the current and future customer needs.
Advanced Arresting Gear (AAG) and MK7 arresting gear systems. The incumbent will serve as a technical expert in the design, development, testing, and evaluation of AAG and MK7 systems, both land-based and shipboard. They will lead test engineering efforts for AAG and MK7 systems across multiple test sites (e.g., JCTS, RALS) and ship hulls and manage Integrated Management Schedules (IMS) to prioritize and track test efforts
Electromagnetic Aircraft Launch System (EMALS) and Steam Catapult systems. The incumbent will serve as a technical expert in the design, development, testing, and evaluation of EMALS and Steam Catapult systems, both land-based and shipboard. They will lead test engineering efforts for EMALS and Steam Catapult systems across multiple test sites (e.g., SFD, TC13-0, TC13-2).
Additional qualification information can be found from the following Office of Personnel Management website:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
This a Defense Acquisition Workforce position that requires an Engineering and Technical Management, Foundational acquisition certification. The incumbent has 36 months to earn this certification. Incumbent must obtain and maintain certification in accordance with DoD Instruction 5000.66.
Acquisition Workforce (AWF) members must complete 80 hours of Continuous Learning Points (CLPs) every two (2) years, in accordance with DoDI 5000.66. Workforce members are encouraged to earn their CLPs by completing Defense Acquisition University (DAU) Credentials. Obtaining certification within the allotted grace period and maintaining CLPs before and after achieving certification are conditions of employment. Failure to meet these requirements could result in disciplinary action and/or removal from employment.
Education
Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org
OR
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.
OR
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
Additional information
This position is covered by the Department of Defense Priority Placement Program.
Additional vacancies may be filled by this announcement.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf
PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.
ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/
Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.
Expand Hide additional information
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
Benefits
Help
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.