ZipRecruiter

Log In

2

Remote First Article Inspection As9102 Jobs (NOW HIRING)

AnDek Staffing Services

Be Seen First

CMM Programmer

Orange, CA · Remote

$30 - $35/hr

Conduct First Article Inspections (FAIs) per AS9102, along with in-process and final inspections. * Identify, document, and report nonconformances; generate NCRs and assist in root cause analysis and ...

L3HHCM20

Specialist Supplier Quality Engineer

Columbus, OH · Remote

$84K - $156K/yr

Remote in Indiana-Illinois-SW Ohio Job Schedule: 9/80: Employees work 9 out of every 14 days ... Working knowledge of AS9102 First Article Inspection requirements * Experience in manufacturing and ...

L3HHCM20

Metal Products Project Lead

Montgomery, AL · Remote

$100K - $186K/yr

Remote Opportunity (Huntsville, AL) Job Schedule: 9/80: Employees work 9 out of every 14 days ... and first article inspection requirements are met on schedule. Metal Products Project Lead will ...

Infosys Limited Digital

Lead SAP QM Consultant

$94K - $131K/yr

Job details Job Role Lead Consultant - US Work Location Anywhere in the US and/or Remote State ... Knowledge of quality specific processes such as First Article Inspection, Non-Conformances, and ...

AST SpaceMobile

Supplier Quality Engineer

Perform source inspections on mechanical assemblies, including review of First Article Inspection Reports (FAIR), sampling inspection plans, material traceability, and special processing. * Conduct ...

next page

Showing results 1-20

People also search for

All JobsFirst Article Inspection As9102 JobsRemote First Article Inspection As9102 Jobs

Remote First Article Inspection As9102 information

See salary details

$12

$20

$32

How much do remote first article inspection as9102 jobs pay per hour?

As of Jun 7, 2026, the average hourly pay for remote first article inspection as9102 in the United States is $20.39, according to ZipRecruiter salary data. Most workers in this role earn between $16.11 and $23.08 per hour, depending on experience, location, and employer.

What is the difference between Remote First Article Inspection As9102 vs Quality Inspector?

AspectRemote First Article Inspection As9102Quality Inspector
CertificationsAS9102, ISO 9001ISO 9001, industry-specific certifications
Work EnvironmentPrimarily remote, with some on-site visitsOn-site manufacturing or inspection facilities
Industry UsageAerospace, defense, manufacturingManufacturing, quality assurance across industries
Job FocusDocument review, compliance, and reporting for first article inspectionsPhysical inspection, testing, and quality control of products

Remote First Article Inspection As9102 specialists focus on reviewing documentation and ensuring compliance with aerospace standards remotely, while Quality Inspectors perform hands-on inspections of products on-site. Both roles require quality certifications, but their work environments and daily tasks differ significantly.

What are the key skills and qualifications needed to thrive as a Remote First Article Inspection (AS9102) specialist, and why are they important?

To thrive as a Remote First Article Inspection (AS9102) specialist, you need a solid background in quality assurance, knowledge of aerospace manufacturing processes, and familiarity with AS9102 standards, usually supported by relevant technical education or certifications. Proficiency with digital inspection tools, measurement equipment, CAD software, and document management systems is typically required. Strong attention to detail, effective communication skills, and the ability to work independently in remote settings are essential soft skills. These competencies ensure accurate inspections, compliance with aerospace standards, and seamless collaboration with distributed teams, which are critical for product quality and regulatory adherence.

What is a Remote First Article Inspection AS9102?

A Remote First Article Inspection (FAI) AS9102 is a process in which the initial sample part produced in a manufacturing run is inspected and verified against engineering drawings and specifications, but the inspection is conducted remotely using digital tools, rather than in person. AS9102 refers to the Aerospace Standard 9102, which outlines the requirements for first article inspections in the aerospace and defense industries. Remote FAIs allow suppliers and customers to collaborate efficiently, reduce travel costs, and speed up the validation process while maintaining compliance with industry standards.

What are some common challenges faced by Remote First Article Inspection AS9102 professionals, and how can they be addressed?

One of the main challenges for Remote First Article Inspection AS9102 professionals is ensuring accurate and thorough inspections without being physically present on-site. This often requires strong communication skills to coordinate with on-site teams and a deep familiarity with digital inspection tools and documentation platforms. To address these challenges, it's important to establish clear protocols, leverage reliable video conferencing and data-sharing technologies, and maintain meticulous records to meet aerospace industry standards. Collaboration and proactive problem-solving are key to overcoming any technical or logistical issues that may arise.
More about Remote First Article Inspection As9102 jobs
What cities are hiring for Remote First Article Inspection As9102 jobs? Cities with the most Remote First Article Inspection As9102 job openings:
What are the most commonly searched types of First Article Inspection As9102 jobs? The most popular types of First Article Inspection As9102 jobs are:
What states have the most Remote First Article Inspection As9102 jobs? States with the most job openings for Remote First Article Inspection As9102 jobs include:
What job categories do people searching Remote First Article Inspection As9102 jobs look for? The top searched job categories for Remote First Article Inspection As9102 jobs are:
Remote First Article Inspection As9102 jobs near you
Infographic showing various Remote First Article Inspection As9102 job openings in the United States as of May 2026, with employment types broken down into 12% Full Time, 12% Part Time, 4% Temporary, and 72% Contract. Highlights an 64% Physical, 1% Hybrid, and 35% Remote job distribution, with an average salary of $42,417 per year, or $20.4 per hour.
CMM Programmer

CMM Programmer

AnDek Staffing Services

Orange, CA • Remote

$30 - $35/hr

Full-time

Medical, Dental, Vision

Posted 15 days ago

Be Seen First

After you apply to this job, you can share why you’re interested to jump to the top of the candidate list.

Job description

Experienced CMM Programmer, supporting precision inspection for aerospace-grade forged and machined components. The successful candidate will bring 5+ years of hands-on experience in CMM and Romer arm inspection/programming, a deep understanding of

GD&T, and a sharp eye for quality within a regulated manufacturing environment.


ESSENTIAL FUNCTIONS: (include but are not limited to)

  • Perform dimensional inspections of forged and machined aerospace components using CMMs and portable Romer
  • arms.
  • Program and troubleshoot inspection routines using PC-DMIS or equivalent CMM software.
  • Operate and program Romer/FARO arms for mobile measurement, in-process verification, and reverse engineering.
  • Interpret aerospace engineering drawings, 3D CAD models, and technical specifications with precision.
  • Conduct First Article Inspections (FAIs) per AS9102, along with in-process and final inspections.
  • Identify, document, and report nonconformances; generate NCRs and assist in root cause analysis and
  • corrective/preventive actions (CAPA).
  • Maintain calibration status and traceability of inspection equipment per AS9100D standards.
  • Work closely with Quality Engineers, Machinists, and Production teams to resolve quality issues and support
  • continuous improvement.
  • Support internal and customer audits; provide detailed inspection records and reports upon request
  • Complete all applicable inspection documentation, including first article inspection reports and daily inspection logs.
  • Move Work Orders in the production system (Flex) upon inspection completion.
  • Maintain clean and organized inspection work areas, tools, and equipment.
  • Promptly report non-conformances, equipment issues, or safety concerns to the Quality Manager or designee.
  • Actively support ISO 9001 and AS9100 compliance efforts and internal audits.
  • Participate in continuous improvement initiatives, including 5S practices.
  • Promote and contribute to a positive and collaborative work environment.


QUALIFICATIONS:

  • 5+ years of experience in aerospace quality inspection, including forging and machining environments.
  • Proficiency in CMM operation and programming (PC-DMIS or equivalent).
  • Experience using and programming Romer or FARO arms.
  • Expert knowledge of GD&T (ASME Y14.5) and blueprint interpretation.
  • Familiarity with AS9100D, ISO 9001, and AS9102 FAI requirements.
  • Skilled in using standard metrology tools (micrometers, calipers, height gauges, etc.).
  • Strong computer skills: MS Office Suite, quality management software, and data reporting tools.
  • Excellent communication, documentation, and problem-solving skills.

Company Description

With over 20 years of experience AnDek Staffing has created and maintained relationships by understanding our partners needs and continuously seeking ways to improve our services.