ZipRecruiter

Log In

1

Powder Coating Jobs in Alabama (NOW HIRING)

Nextek, Inc.

Coating Specialist

Madison, AL · On-site

Remove any excess coating and perform manual touch-ups. Inspect assemblies to ensure proper coating coverage. Transport racks of circuit boards from one destination to another to continue the ...

Aerotek

Painter

Cordova, AL

$18 - $23/hr

Perform powder coating and liquid-based painting on fabrication projects, ensuring consistent coverage and proper curing. * Set up, operate, and maintain paint booths, spray equipment, and related ...

Graco

From simple hand coating to fully automated powder coating systems, Gema offers solutions that meet the high demands and requirements of customers around the world in a wide range of industrial ...

Alamo Group

Painter

Selma, AL · On-site

$16.50 - $22.50/hr

Fasten and secure parts to ensure that they are safely painted through the powder coating process. This position will work under general demand of the assembly department through work orders. Operate ...

New

Alamo Group, Inc.

Painter

Selma, AL · On-site

$16.50 - $22.50/hr

Fasten and secure parts to ensure that they are safely painted through the powder coating process. This position will work under general demand of the assembly department through work orders. Operate ...

New

reliance

Paint Line Operator, 1st Shift

Fort Payne, AL · On-site

$13 - $15.50/hr

Previous experience in a powder coating environment a plus. * Ability to multi-task & handle task with competing priorities; ability to work independently and effectively in a team environment

next page

Showing results 1-20

All JobsPowder Coating JobsPowder Coating Jobs in Alabama

Powder Coating information

See Alabama salary details

$11

$16

$22

How much do powder coating jobs pay per hour?

As of Sep 6, 2026, the average hourly pay for powder coating in Alabama is $16.87, according to ZipRecruiter salary data. Most workers in this role earn between $14.81 and $18.32 per hour, depending on experience, location, and employer.

What is powder coating?

Powder coating is a finishing process in which a dry, powdered paint is electrostatically applied to a surface and then cured under heat to form a durable, protective, and decorative layer. This method is commonly used on metals like aluminum, steel, and automotive parts, offering a high-quality finish that is resistant to chipping, scratching, and fading. Powder coating is also environmentally friendly because it produces less hazardous waste compared to traditional liquid painting. The process comes in a wide variety of colors and textures to suit different applications.

What are powder coating jobs?

Powder coating jobs are positions in which you help paint and finish various products—often, but not exclusively, metal—using a dry powder coat that can be treated to become a solid surface. In this role, you may help prepare components, spray on the powder, and ensure that the final product meets all manufacturing standards. Most powder coating jobs take place in regulated environments that help minimize the chance of irregularities while using the specialized tools required to make powder coating work. Powder coating jobs also help move products into and out of an oven to cure the surface and ensure a smooth, even finish.

What are the key skills and qualifications needed to thrive as a powder coating technician?

To excel as a Powder Coating Technician, you need a solid understanding of surface preparation, coating application techniques, and safety protocols, often supported by a high school diploma or vocational training. Familiarity with powder coating guns, curing ovens, and quality control systems is commonly required, with some employers seeking certifications such as PCI (Powder Coating Institute) credentials. Attention to detail, strong work ethic, and effective teamwork are vital soft skills for ensuring consistent, high-quality finishes. These skills and qualities are crucial to maintain safety standards, minimize defects, and achieve optimal product durability and appearance.

What are some common challenges faced by powder coating technicians, and how can they be addressed?

Powder coating technicians often encounter challenges such as achieving a uniform finish, preventing contamination, and managing the curing process. Dust, humidity, and improper surface preparation can affect the quality of the coating. Staying vigilant about equipment maintenance, regularly cleaning work areas, and closely following safety and process protocols help address these issues. Team collaboration is important, as technicians frequently coordinate with quality control and production teams to ensure standards are met and deadlines are achieved.

What is the difference between Powder Coating vs Spray Painter?

AspectPowder CoatingSpray Painter
CredentialsTypically requires certification in powder coating applicationRequires spray painting certification or license
Work EnvironmentIndustrial facilities, spray booths, manufacturing plantsAuto body shops, industrial painting facilities
Industry UsageUsed for durable, high-quality finishes on metal productsUsed for decorative and protective finishes on various surfaces

Powder Coating and Spray Painter roles both involve applying finishes, but Powder Coating uses a dry powder applied electrostatically and cured in an oven, offering durable results. Spray Painters typically use liquid paints applied with spray guns, suitable for a variety of surfaces. While both require knowledge of surface preparation and safety protocols, their application methods and end uses differ significantly.

Do you need a license to powder coat?

In most regions, powder coating technicians do not require a specific license, but they may need to follow safety regulations and obtain certifications related to handling hazardous materials and operating spray equipment. Employers often provide training on safety standards and proper procedures. Licensing requirements can vary by location, so it's important to check local regulations for compliance.

Is powder coating hard work?

Powder coating as a job involves operating specialized equipment, working in a physically demanding environment, and maintaining safety protocols. It requires attention to detail, some physical strength, and the ability to work with chemicals and high temperatures, making it moderately to physically demanding work. Proper training and safety measures are essential for this role.
More about Powder Coating jobs

What are the most commonly searched types of Powder Coating jobs in Alabama?

The most popular types of Powder Coating jobs in Alabama are:

What are popular job titles related to Powder Coating jobs in Alabama?

For Powder Coating jobs in Alabama, the most frequently searched job titles are:

What job categories do people searching Powder Coating jobs in Alabama look for?

The top searched job categories for Powder Coating jobs in Alabama are:

What cities in Alabama are hiring for Powder Coating jobs?

Cities in Alabama with the most Powder Coating job openings:

Powder Coating jobs near you
Infographic showing various Powder Coating job openings in Alabama as of August 2026, with employment types broken down into 100% Full Time. Highlights an 100% In-person job distribution, with an average salary of $35,091 per year, or $16.9 per hour.

Paintline Supervisor - Powder Coating/Wet Paint/Packout

Industrial Manufacturing Company - North Alabama

Decatur, AL • On-site

$30 - $35/hr

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted 3 days ago

Job description

We are seeking a Paint Line Supervisor - Powder Coating/Wet Paint/Packout to join our team! You will oversee the activities of a team of production workers. - Please read entire Job Description and Requirements before applying. We will not contact those that do not meet the qualifications.

Responsibilities:

· Utilizes the Production Schedules in due date order to coordinate workflow scheduling. Exceptions will be communicated by production control or operations manager.

· Direct, coordinate and monitor the daily activities and performance of employees to assure delivery of high productivity, quality, and compliance of company policies, procedures and safety.

· Manages the daily operations of the powder coat paint line, industrial liquid painting booth, assembly and packaging areas.

· Manages employee performance through motivation, delegation, development, mentoring and

resolving conflict.

· Take corrective action as necessary on a timely basis in accordance with company policy.

· Participate in staff selection, performance and compensation evaluations, corrective action and terminations.

· Analyze production data to identify and resolve inefficiencies.

· Monitor production processes and equipment to minimize downtime.

· Coordinate with maintenance to ensure equipment is properly maintained.

· Review equipment and tools to determine replacement or upgrade needs while improving capabilities and efficiencies.

· Meet production goals, quality and cost objectives.

· Train and mentor employees to enhance skills and productivity.

· Review, correct and approve the daily labor reports for accuracy of work order and hours worked.

· Keep Operations Manager advised of work status, workload, problems and progress as related to work assignments.

· Read and interpret drawings, follow routers and use simple math to perform basic calculations.

· Comply with all quality policies, specifications, regulations and instructions.

· Participate in the implementation and roll-out of lean principles using 5S methods and tools.

· Update computer records and paperwork in accordance with production requirements.

· Maintain work area and equipment in clean orderly condition and follow prescribed safety procedures.

​Qualifications: Please do not apply if you do not meet the requirements. 

  • Previous experience in production Paint Line, manufacturing, or other related fields
  • Knowledge of production tools and equipment
  • Strong leadership qualities - Must be able to speak English and communicate effectively
  • Excellent written and verbal communication skills
  • Ability to perform essential responsibilities and physical demands.

Minimum of (3) three years of manufacturing supervision in an industrial manufacturing paint environment.

Strong understanding of powder coating and wet paint systems.

Strong leadership and team management skills.

Excellent problem-solving abilities.

Ability to work in a fast-paced environment.

Microsoft Office experience (Excel, Word, Outlook).

Recruiters Please DO NOT CONTACT