1

Pipeline Survey Jobs (NOW HIRING)

Familiar with pipeline survey and pipeline construction techniques. * Work with a drafting and mapping team to produce alignment drawings and provide coordination with ROW, environmental and ...

Familiar with pipeline survey and pipeline construction techniques. * Work with a drafting and mapping team to produce alignment drawings and provide coordination with ROW, environmental and ...

The Survey Party Chief requires a minimum of 10 years pipeline survey experience preferred with the last 5 performing the Party Chief duties. Equal Opportunity Employer/Veterans/Disabled

Familiar with pipeline industry standards, terminology and procedures * Knowledge of equipment setup and operation * Ability to read, write and understand English and be familiar with survey plans ...

Perform the daily operations pertaining to pipeline surveying, take instructions from Party Chief on a daily basis, instruct crew members, run GPS and Total Station equipment proficiently, carry ...

Perform the daily operations pertaining to pipeline surveying, take instructions from Party Chief on a daily basis, instruct crew members, run GPS and Total Station equipment proficiently, carry ...

Perform the daily operations pertaining to pipeline surveying, take instructions from Party Chief on a daily basis, instruct crew members, run GPS and Total Station equipment proficiently, carry ...

Perform the daily operations pertaining to pipeline surveying, take instructions from Party Chief on a daily basis, instruct crew members, run GPS and Total Station equipment proficiently, carry ...

Showing results 21-40

Pipeline Survey information

See salary details

$14

$31

$48

How much do pipeline survey jobs pay per hour?

As of Aug 6, 2026, the average hourly pay for pipeline survey in the United States is $31.06, according to ZipRecruiter salary data. Most workers in this role earn between $24.28 and $36.06 per hour, depending on experience, location, and employer.

What is a pipeline survey?

Pipeline survey jobs involve inspecting, mapping, and monitoring pipelines that transport oil, gas, water, or other substances. Surveyors use specialized equipment and technology such as GPS and GIS to determine pipeline routes, check for potential hazards, and ensure regulatory compliance. Their work helps prevent leaks, environmental damage, and ensures the safety and efficiency of pipeline operations. These professionals often work outdoors and may travel to remote locations as part of their duties.

What are some common challenges faced by professionals in pipeline survey roles, and how can they be addressed?

Pipeline survey professionals often encounter challenges such as working in remote or difficult terrain, ensuring data accuracy under changing weather conditions, and coordinating with large, multidisciplinary teams. To address these, surveyors use advanced GPS and GIS technologies, follow strict safety protocols, and maintain clear communication with engineers and project managers. Regular training and staying updated on the latest surveying methods also help overcome technical and logistical obstacles, ensuring project timelines and quality standards are met.

What does a pipeline surveyor do?

A pipeline surveyor is responsible for measuring and mapping underground or aboveground pipelines to ensure proper placement and alignment. They use tools like GPS, total stations, and surveying software, often working outdoors in various weather conditions. Accurate surveying is essential for safe installation, maintenance, and compliance with regulations.

What is the difference between Pipeline Survey vs Pipeline Technician?

AspectPipeline SurveyPipeline Technician
CertificationsGIS, surveying, or mapping certificationsPipeline construction, safety, and technical certifications
Work EnvironmentField surveying, mapping, and data collection on-siteConstruction sites, maintenance, and repair of pipelines
Industry UsagePlanning and mapping pipeline routesBuilding, maintaining, and repairing pipelines
Common Search IntentSurveying and mapping pipelinesPipeline installation and repair

Pipeline Surveyors focus on mapping and planning pipeline routes using surveying tools, while Pipeline Technicians handle the installation, maintenance, and repair of pipelines. Both roles are essential in pipeline projects but differ in their primary responsibilities and skill sets.

What are the key skills and qualifications needed to thrive as a pipeline surveyor?

To thrive as a Pipeline Surveyor, you need strong skills in land surveying, mapping, geospatial analysis, and a relevant degree or certification such as a Surveying or Civil Engineering qualification. Proficiency with GPS, GIS software, AutoCAD, and other surveying instruments is typically required. Attention to detail, problem-solving abilities, and effective communication are vital soft skills in this role. These competencies ensure accurate pipeline routing, compliance with regulations, and efficient collaboration with engineering and construction teams.

How much does a pipeline surveyor make?

A pipeline surveyor's average salary ranges from $50,000 to $80,000 per year, depending on experience, location, and certifications. They typically work outdoors with surveying tools and may require knowledge of GIS and CAD software.
More about Pipeline Survey jobs
What cities are hiring for Pipeline Survey jobs? Cities with the most Pipeline Survey job openings:
What states have the most Pipeline Survey jobs? States with the most job openings for Pipeline Survey jobs include:
Infographic showing various Pipeline Survey job openings in the United States as of August 2026, with employment types broken down into 94% Full Time, 3% Part Time, and 3% Contract. Highlights an 82% Physical, 3% Hybrid, and 15% Remote job distribution, with an average salary of $64,602 per year, or $31.1 per hour.

Pipeline & Facilities Engineer

EnSiteUSA

Houston, TX • On-site

Full-time

Re-posted 28 days ago


Job description

JOB SUMMARY
This position is responsible for providing both general and specialized engineering services to support EnSiteUSA Project Management in the planning, analysis, estimating and design of primarily natural gas and liquids pipelines; compressor stations; measurement; regulation; and related facilities. This position will be located in Houston, Tx.
ESSENTIAL FUNCTIONS
  • Planning of feasibility studies; FEED development; modeling; conceptual design; permitting; comprehensive understanding of process piping system design; project scope development; capital cost estimating and project scheduling.
  • Design and installation of onshore natural gas or liquids pipeline systems including: measurement & regulation equipment, pigging facilities, mainline valves, and compressor stations
  • Familiar with pipeline survey and pipeline construction techniques.
  • Work with a drafting and mapping team to produce alignment drawings and provide coordination with ROW, environmental and archaeological personnel
  • Design of gas transmission, gathering and distribution piping and facilities; gas storage; liquids pipelines; compressor stations; emergency shutdown; pipeline interconnects; block valve settings; pipeline pigging; odorization systems; dehydration; measurement and regulator stations; instrumentation and controls; interpretation and application of regulatory codes and standards; materials and equipment requisitioning; technical specifications and engineering standards.
  • Work with multiple disciplines (civil, structural, I&E, etc..) and provide direction to drafting to develop PFD's, P&ID's, site plans, and piping drawings in order to create a construction set of drawings.
  • Complete pipe sizing, and wall thickness calculations per client specifications.
  • Working knowledge of HCA's and class location studies per DOT.
  • Determine maximum field bending angles per client specifications and develop induction bend list for angles exceeding the maximum field bend angle.
  • Proficient with PHMSA DOT codes and API and ASME standards relating to pipeline design, materials and installation
  • Have a working knowledge of compressor station, M&R, and facility design in accordance with PHMSA DOT Part 192.

OTHER DUTIES AND RESPONSIBILITIES OF THE JOB
  • Application of fluid and dynamics, thermodynamics, compression cycle and hydraulic machine principles to design and selection of compressors, flow and pressure control equipment, pumps, pressure vessels, atmospheric tanks, coalescing filtration and adsorption equipment including integration of engineered packages into complete process plants.
  • Performs a wide variety of complex engineering assignments in areas of design, development, analysis, evaluation, testing, preparation of construction bid documents, and project management.
  • Interfaces with clients to identify and meet their expectations.
  • May perform other duties as deemed necessary by supervisor.

OTHER SKILLS AND ABILITIES
  • Ability to listen to the voice of the client and translate into engineering design that meets or exceeds expectations.
  • Ability to demonstrate excellent oral and written skills.
  • Ability to take initiative and be a self-starter.
  • Ability to demonstrate organizational skills, including attention to detail.
  • Proven ability to organize, schedule, and complete work on-time and with high quality.
  • Knowledge of DOT, FERC, OSHA, and EPA codes and standards.
  • Demonstrate the ability to build and sustain positive working relationships across geographical boundaries.
  • Strong work ethic.
  • Ability to travel up to 15%.

Knowledge and experience using engineering design software such as HYSYS, GasCalc, Pipeline Toolbox, Caepipe, Caesar II, or similar is a plus.
EXPERIENCE REQUIREMENTS
  • E.I.T or P.E. designation preferred.
  • Pay range will depend upon relevant experience and education.

EDUCATION REQUIREMENTS
  • Bachelor of Science Bachelor's Degree in Mechanical Engineering, Civil Engineering, Petroleum Engineering, Natural Gas Engineering, Industrial or Chemical Engineering.

WE ARE NOT ACCEPTING INQUIRIES OR CANDIDATES FROM STAFFING AGENCIES AT THIS TIME.

EnSite USA logo

About EnSite USA

Sourced by ZipRecruiter

Serving North America’s energy spectrum for decades, we have developed a strong resume demonstrating a storied and diverse EPC & EPCM project history. This experience stretches across the renewable, electric, and upstream, midstream, downstream, transmission, and distribution pipeline markets, giving EnSiteUSA a unique blend of experience with field-proven insight into complex project challenges. We combine our experience with forward-thinking technology solutions to deliver the best solution for your needs. To the core, we are project management professionals and technical subject matter experts (SMEs). Because we understand the connection between structure and purpose, we have built our company to precisely accommodate our clients. We listen. Whether it’s full- or single-service support you require, we tailor our solutions accordingly. We run lean and without bureaucratic complexity, which means we can adapt quickly and proactively, scaling up or down as needed. We believe that trust is earned on every project, never compromising on safety, integrity or our word. Ultimately, our purpose is to serve our clients. We’ve built a company - and a reputation - for doing just that.

Industry

Professional, scientific, and technical services

Company size

201 - 500 Employees

Headquarters location

Houston, TX, US

Year founded

1989

Social media