ZipRecruiter

Log In

1

Night Railing Installer Jobs (NOW HIRING)

Alstom

MOW Technician

Sanford, FL · On-site

Repair and rebuild railroad track. Physical duties will require frequent walking over extended ... PERFORM TRACK MAINTENANCE, REPAIR, AND INSTALLATION. Drive spikes into ties with a spike maul; pull ...

Alstom

MOW Technician

Sanford, FL · On-site

Repair and rebuild railroad track. Physical duties will require frequent walking over extended ... PERFORM TRACK MAINTENANCE, REPAIR, AND INSTALLATION. Drive spikes into ties with a spike maul; pull ...

SIRTOA

Track Worker

Staten Island, NY · On-site

The benefits of this position include but are not limited to, night and weekend salary ... The maintenance installation, inspection, testing, alteration, and repair of rails, frogs, switches ...

Herzog

Track Welder

Orlando, FL

Facilitate/Assist with the overall installation and repairs of railroad track and embankments ... Must be able to be flexible with night and day work, including to perform scheduled and unscheduled ...

SIRTOA

Track Worker

Staten Island, NY · On-site

$36.37/hr

The benefits of this position include but are not limited to, night and weekend salary ... installation, inspection, testing, alteration, and repair of rails, frogs, switches, ties, plates ...

Herzog

Track Welder

Orlando, FL · On-site

Facilitate/Assist with the overall installation and repairs of railroad track and embankments ... Must be able to be flexible with night and day work, including to perform scheduled and unscheduled ...

previous page

Showing results 41-60

All JobsConstruction JobsGeneral Construction JobsFence Installer JobsNight Railing Installer Jobs

Night Railing Installer information

See salary details

$12

$27

$47

How much do night railing installer jobs pay per hour?

As of Sep 10, 2026, the average hourly pay for night railing installer in the United States is $27.14, according to ZipRecruiter salary data. Most workers in this role earn between $18.51 and $36.06 per hour, depending on experience, location, and employer.

What cities are hiring for Night Railing Installer jobs?

Cities with the most Night Railing Installer job openings:

What are the most commonly searched types of Railing Installer jobs?

The most popular types of Railing Installer jobs are:

What states have the most Night Railing Installer jobs?

States with the most job openings for Night Railing Installer jobs include:

What are popular job titles related to Night Railing Installer jobs?

For Night Railing Installer jobs, the most frequently searched job titles are:

Night Railing Installer jobs near you
Infographic showing various Night Railing Installer job openings in the United States as of August 2026, with employment types broken down into 1% As Needed, 75% Full Time, 16% Part Time, 5% Contract, and 3% Nights. Highlights an 100% Physical job distribution, with an average salary of $56,443 per year, or $27.1 per hour.

MOW Technician

Sanford, FL • On-site

Alstom
Rail Transportation • 10K+ employees
Learn more about Alstomexternal

Full-time

Re-posted yesterday

Alstom rating

7.5

Company rating: 7.5 out of 10

Based on 49 frontline employees who took The Breakroom Quiz

Job description

At Alstom, we understand transport networks and what moves people. From high-speed trains, metros, monorails, and trams, to turnkey systems, services, infrastructure, signalling and digital mobility, we offer our diverse customers the broadest portfolio in the industry. Every day, 80,000 colleagues lead the way to greener and smarter mobility worldwide, connecting cities as we reduce carbon and replace cars.
In your role as a Maintenance of Way Technician/Laborer, you will:
Repair and rebuild railroad track. Physical duties will require frequent walking over extended areas with uneven footing; flexibility sufficient for track maintenance tasks such as flexing to pick up tie plates; balance sufficient to walk on ballast; standing for more than half of each work day with periodic breaks; lift/carry and push/pull equipment and other objects weighing 25 lbs. (frequently), 50 lbs. (occasionally), and 75 lbs. (infrequently); occasional climbing on ladders; bending, stooping, and kneeling; good eye-hand coordination; and bilateral dexterity.
Responsibilities
  • A track laborer's job consists of repairing and rebuilding railroad track, using hand tools to do so. Specific duties will include, but are not limited to, removing and replacing ties, pulling and driving spikes, shoveling rock ballast, loading and unloading equipment and material, repair and replace rail and remove and apply rail anchors and various other tasks, as assigned.
  • PERFORM TRACK MAINTENANCE, REPAIR, AND INSTALLATION. Drive spikes into ties with a spike maul; pull spikes with claw bar; install and remove rail anchors; slide, place, and align tie plates under rails; cut in new rails; plug old spike holes; with assistance, lift rails using manual track jack; sweep off ballast /rock from track and switches.
  • HANDLE AND MOVE TRACK MATERIALS AND EQUIPMENT. With assistance, load/unload equipment weighing 85- to 100 lbs. (air hammer, rail drill) from back of cart or truck and carry to work site; without assistance, load/unload equipment weighing 50 to 75 lbs. (track jack, rail saw, rail drill); with assistance, remove and install rail using rail tongs, with assistance, remove ties and slide new ties into place using two-man tie tongs; with assistance, move debris away from work site (spike cans, anchors).
  • MAINTAIN TRACKBED. Remove and replace ballast; tamp ballast; unload or assist in unloading ballast from ballast cars.
  • OBSERVE THE CONDITION OF TRACK, TRACKBED, AND TRACK RIGHT-OF-WAY FOR PROBLEMS OR DEFECTS. Make quick visual inspections for broken rails, defective switches and signals, deteriorating trackbed, track obstructions and weather related problems; check switch points; observe right-of-way and passing trains for shifted loads and spillage.
  • WORK WITH EQUIPMENT. Safely and effectively operate the following: a hydraulic hammer to drive spikes; air or gas powered wrenches to loosen or tighten track bolts; hydraulic rail drill to drill holes in rail; portable abrasive rail saw to cut rails, and hydraulic spike pullers to remove spikes.
  • PRACTICE SAFE WORK HABITS. Understand and follow company and industry safety rules, practices, and procedures, wear prescribed safety apparel; take appropriate action when conditions threaten safety of self or coworkers; ensure equipment and work area are in safe operating condition before starting work; monitor for emergency situations by identifying visual signals and warning sounds.

Qualifications
Required
  • Must have a valid driver's license.
  • Ability to perform heavy physical labor.
  • Must be capable of performing physically strenuous work on a continuous basis.
  • Must be able to read and comprehend regulations and instructions as well as possess good verbal communication skills.
  • Develop and maintain positive working relationships with coworkers, supervisors and/or customers and effectively handle conflict situations.
  • Ability to speak English in a clear, concise manner in order to communicate with coworker(s) and supervisor(s).
  • Authorized to work in the United States without company sponsorship.
  • Must be 21 years of age or older.
  • Valid Commercial Driver's License (CDL).

Preferred
  • Experience operating construction or farm equipment.
  • Welding certificate.
  • 1 year(s) Railroad Maintenance of Way work experience.
  • Welding experience.
  • Qualified in Roadway Worker Protection.
  • Heavy equipment operator experience.

Work Conditions
  • Must wear personal protective equipment such as safety glasses, safety boots, hard hats, and hearing protection where the company requires.
  • Outside work is required regardless of weather conditions.
  • Work takes place in many rural remote geographic areas.
  • On the road or traveling, as required.
  • Work may be seasonal based on weather, business conditions, or seniority.
  • The railroad operates 24 hours a day, 7 days a week. You may be required to work all 3 shifts, if needed. You are subject to overtime, and weekend, holiday, and/or night work.
  • Must provide your own transportation.
  • Travel may be required.
  • Walking extensively on uneven surfaces.
  • Continuous bending, stooping and kneeling are required for this position.
  • The pay rate for this position is set by the union agreement and cannot be individually negotiated.
  • Must have zero work related safety violations in the past two years.
  • Ensure compliance with all railroad rules and regulations for safety, operations and Federal Railroad Administration (FRA). Must practice safe work habits to prevent on the job accidents and injuries. Must utilize all protective equipment assigned.
  • Compliance with the applicable attendance policy is an essential function of this position.
  • Must be willing and able to work around large equipment such as railcars, locomotives and cranes.

You don't need to be a train enthusiast to thrive with us. We guarantee that when you step onto one of our trains with your friends or family, you'll be proud. If you're up for the challenge, we'd love to hear from you!
Important to note
As a global business, we're an equal-opportunity employer that celebrates diversity across the 63 countries we operate in. We're committed to creating an inclusive workplace for everyone.

What Alstom employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply