ZipRecruiter

Log In

1

Mold Inspection Jobs (NOW HIRING)

Adkev Inc.

Mold Setter

Monticello, IN

$16.50 - $19.25/hr

Verify quality of product at start of production (1st Piece Inspection) * Train and assist set-up preps, as required * Perform in-process mold cleanings, as scheduled * Log information in Mattec

Sybridge Technologies

Mold Maker

Fitchburg, MA · On-site

Perform final inspection, complete work documentation, maintain material identification, and move work piece * Fit and assemble a mold which includes, but is not limited to: transfer and locate holes ...

SyBridge Technologies

Mold Maker

Fitchburg, MA · On-site

Perform final inspection, complete work documentation, maintain material identification, and move work piece * Fit and assemble a mold which includes, but is not limited to: transfer and locate holes ...

US Farathane

Mold Maker

Auburn Hills, MI · On-site

The Mold Maker works from designs to build and repair thermoplastic and thermoset injection molds ... Maintain quality of parts through inspection and communication with fellow teammates. * Work with ...

US Farathane Corporation

Mold Maker

Auburn Hills, MI · On-site

The Mold Maker works from designs to build and repair thermoplastic and thermoset injection molds ... Maintain quality of parts through inspection and communication with fellow teammates. * Work with ...

fng

Mold Setter

Detroit, MI

$17.75 - $21/hr

Inspect and clean molds before and after installation to ensure operational readiness. * Coordinate with the maintenance team for mold and equipment repairs or preventive maintenance. * Monitor ...

fng

Mold Setter

Detroit, MI

$17.75 - $21/hr

Inspect and clean molds before and after installation to ensure operational readiness. * Coordinate with the maintenance team for mold and equipment repairs or preventive maintenance. * Monitor ...

fng

Mold Setter

Detroit, MI

$17.75 - $21/hr

Inspect and clean molds before and after installation to ensure operational readiness. * Coordinate with the maintenance team for mold and equipment repairs or preventive maintenance. * Monitor ...

Dynamic Group Inc

Mold Builder

Minneapolis, MN · On-site

$30 - $40/hr

Mold Builder JOB LOCATION: Coon Rapids, MN EXPECTED HOURS: 40hrs per week (+ OT as required ... Perform inspections to assure the quality of the finished product, taking necessary steps to verify ...

Altor Solutions

Mold Technician

North Andover, MA · On-site

$20.25 - $26.25/hr

Inspect molds for defects. Perform preventive maintenance on molds before installing. Complete change over sheets after completion of each mold change. Maintain any necessary documentation.

Flex-N-Gate

Mold Setter

Detroit, MI · On-site

$17.75 - $21/hr

Inspect and clean molds before and after installation to ensure operational readiness. * Coordinate with the maintenance team for mold and equipment repairs or preventive maintenance. * Monitor ...

Nashville Home Inspection

Home Inspector

Bellevue, TN · On-site

Why Join NHI? * Consistent inspection volume supported by a dedicated marketing team * Stable ... Conduct ancillary services, including radon testing, mold inspections, termite (WDI), and sewer ...

Ambrit Engineering

Mold Maker

Santa Ana, CA

$45 - $48/hr

Ability to perform precision measurements using micrometers, calipers, indicators, height gauges, and related inspection equipment. * Experience with welding and mold repair techniques. * Strong ...

Acro Service Corporation

Be Seen First

Mold Technician

Salt Lake City, UT · On-site

$18 - $19.26/hr

Clean, inspect & rebuild molds * Fix basic mechanical issues * Use hand tools & measuring tools * Read simple drawings * Keep work area clean & safe What you need: * Mechanical skills * Basic tool ...

Adkev Inc.

Mold Setter

Danville, KY

$14.75 - $17.50/hr

Verify quality of product at start of production (1st Piece Inspection) * Train and assist set-up preps, as required * Perform in-process mold cleanings, as scheduled * Log information in Mattec

Workbox Staffing

Mold Maker

Auburn Hills, MI

$34/hr

Capable of using inspection tools (micrometers, indicators, calipers, etc.) * Able to read and interpret CAD mold and part designs * Licensed to operate hoists and power trucks preferred Skills:

Rieke Packaging Systems

Toolroom Mold Technician

Denver, CO

$20.75 - $27.25/hr

Perform mold cleaning , document PM related inspections and record records in IQMS * Preform light repair work and component replacements * Identify mold problems and report them to the Mold Shop ...

TriMas Corporation

Toolroom Mold Technician

Denver, CO

$20.75 - $27.25/hr

Perform mold cleaning , document PM related inspections and record records in IQMS * Preform light repair work and component replacements * Identify mold problems and report them to the Mold Shop ...

next page

Showing results 1-20

All JobsMold Inspection Jobs

Mold Inspection information

See salary details

$15

$30

$38

How much do mold inspection jobs pay per hour?

As of Jun 29, 2026, the average hourly pay for mold inspection in the United States is $30.22, according to ZipRecruiter salary data. Most workers in this role earn between $27.64 and $33.89 per hour, depending on experience, location, and employer.

How much do mold setters make?

Mold setters, who prepare and assemble molds in manufacturing environments, typically earn between $15 and $25 per hour, depending on experience and location. Skilled mold setters with certifications and knowledge of machinery may earn higher wages and often work in industrial or production settings with shift schedules.

How much does a mold inspector make?

A mold inspector's average salary in Florida ranges from $40,000 to $60,000 annually, depending on experience, certifications, and the complexity of inspections. Many inspectors work full-time and may need specialized training or certification in mold assessment and testing tools.

What are the key skills and qualifications needed to thrive in the Mold Inspection position, and why are they important?

To thrive as a Mold Inspector, a thorough understanding of building science, environmental health, and microbial growth is essential, typically supported by certifications such as Certified Mold Inspector (CMI) or IICRC Mold Remediation (AMRT). Familiarity with moisture meters, air sampling pumps, thermal imaging cameras, and environmental testing procedures is highly valuable. Strong attention to detail, effective communication, and problem-solving abilities are important soft skills that help inspectors accurately identify issues and convey findings to clients. These skills and qualifications ensure accurate assessments, regulatory compliance, and the ability to guide remediation efforts effectively.

How do I become a certified mold inspector?

To become a certified mold inspector, you typically need to complete a state-approved training course, gain practical experience in mold assessment, and pass a certification exam offered by organizations such as the Institute of Inspection, Cleaning and Restoration Certification (IICRC) or the National Association of Mold Remediators and Inspectors (NAMRI). Certification requirements vary by state but often include continuing education and adherence to industry standards. Having knowledge of building science, sampling techniques, and safety protocols is essential for the role.

What type of inspectors make the most money?

In the field of mold inspection, experienced inspectors with advanced certifications and specialized skills tend to earn higher salaries. Commercial mold inspectors or those working in high-demand areas often make more than residential inspectors. Salary can also increase with years of experience and additional training in related environmental or building inspection areas.

What does a typical day look like for a Mold Inspector?

A typical day for a Mold Inspector involves conducting on-site inspections at residential or commercial properties, collecting air and surface samples, and documenting findings with photographs and detailed reports. Inspectors often interact with property owners, facility managers, and remediation teams to explain results and recommend next steps. The role requires travel to different sites and the ability to adapt to various building environments, sometimes working in confined or damp spaces. You'll also spend part of your day in the office analyzing data, writing inspection reports, and maintaining certification records for regulatory compliance.

What is a Mold Inspection job?

A mold inspection job involves assessing homes or buildings for mold growth, identifying moisture sources, and determining potential health risks. Inspectors use specialized tools like moisture meters and air sampling devices to detect mold presence. They provide reports with findings and recommendations for remediation if necessary. Mold inspections help ensure a safe indoor environment by addressing mold issues before they become serious problems.

More about Mold Inspection jobs
What cities are hiring for Mold Inspection jobs? Cities with the most Mold Inspection job openings:
What are the most commonly searched types of Mold Inspection jobs? The most popular types of Mold Inspection jobs are:
What states have the most Mold Inspection jobs? States with the most job openings for Mold Inspection jobs include:
What job categories do people searching Mold Inspection jobs look for? The top searched job categories for Mold Inspection jobs are:
Mold Inspection jobs near you
Infographic showing various Mold Inspection job openings in the United States as of June 2026, with employment types broken down into 99% Full Time, and 1% Part Time. Highlights an 97% Physical, 1% Hybrid, and 2% Remote job distribution, with an average salary of $62,857 per year, or $30.2 per hour.
Mold Setter

Mold Setter

Adkev Inc.

Monticello, IN

$16.50 - $19.25/hr

Other

Posted 21 days ago

Key responsibilities

  • Retrieve, set up, and install molds and tooling for production.

  • Perform quality verification, in-process mold cleanings, and equipment maintenance as scheduled.

  • Log production information, perform material changes, and support housekeeping and safety standards.

Adkev rating

5.6

Company rating: 5.6 out of 10

Based on 10 frontline employees who took The Breakroom Quiz

72nd of 79 rated plastic manufacturers

Job description

SUMMARY OF RESPONSIBILITIES  (2nd shift) 

The basic function of the Mold Setter is to apply set up techniques to achieve acceptable molded product while maintaining machines and molds. The Mold Setter is to attend to assigned duties and responsibilities and maintain accuracy standards in production in accordance with stated requirements and IATF standards.

RESPONSIBILITY AND DUTIES

  • Retrieve and set molds
  • Set-up molds, set-up tooling
  • Verify quality of product at start of production (1st Piece Inspection)
  • Train and assist set-up preps, as required
  • Perform in-process mold cleanings, as scheduled
  • Log information in Mattec
  • Set process parameters in presses during changeovers
  • Tag last shot
  • Clean grinders and hoppers daily; unclog grinders using proper lockout procedures
  • Clean equipment filters at presses as production demands
  • Perform color and material changes at production presses as directed by Set-Up Coordinator; properly loading, unloading, and identifying materials used
  • Learn and complete proper mold and equipment storage
  • Perform startup, shutdown, and restart procedures on presses following proper procedures
  • Maintain machinery to insure a safe and productive workplace (i.e. vacuum hoses, grinder blades, circulators, dryers, and mold heaters)
  • Learn and maintain Motan Alarm system; 1st responder for alarms; maintain housekeeping in Motan area
  • Learn to respond to press alarms
  • Follow established safety practices and policies with zero safety violations
  • Support and maintain 5S housekeeping standards

What Adkev employees say

Pay

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply