ZipRecruiter

Log In

1

Mechanical Inspector Jobs in Wisconsin (NOW HIRING)

Generac

CMM Operator / Mechanical Inspector

Whitewater, WI · On-site

$25 - $33/hr

Perform inspections using mechanical gauging as required * Diagnose minor issues and adjust CMM programs to run parts * Develop inspection procedures to measure engineering requirements * Lead ...

Verify

Electromechanical Source Inspection

Appleton, WI · On-site

$34/hr

Verify is seeking an experienced Electro-Mechanical Source Inspector to provide onsite source inspection support at a supplier facility in Appleton, Wisconsin. This is an ongoing opportunity offering ...

Verify

Electromechanical Source Inspection

Appleton, WI · On-site

$34/hr

Verify is seeking an experienced Electro-Mechanical Source Inspector to provide onsite source inspection support at a supplier facility in Appleton, Wisconsin. This is an ongoing opportunity offering ...

SAFEbuilt

Building Inspector

Port Washington, WI · On-site

ICC Commercial Building Inspector and Commercial Mechanical Inspector certifications * ICC Building Plans Examiner and Mechanical Plans Examiner certifications * WI architect registration OR * WI ...

SAFEbuilt

Building Inspector

Kenosha, WI · On-site

ICC Commercial Building Inspector and Commercial Mechanical Inspector certifications * ICC Building Plans Examiner and Mechanical Plans Examiner certifications * WI architect registration OR * WI ...

SAFEbuilt

Building Inspector

Kenosha, WI · On-site

ICC Commercial Building Inspector and Commercial Mechanical Inspector certifications * ICC Building Plans Examiner and Mechanical Plans Examiner certifications * WI architect registration OR * WI ...

SAFEbuilt

Building Inspector

Port Washington, WI · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

ICC Commercial Building Inspector and Commercial Mechanical Inspector certifications * ICC Building Plans Examiner and Mechanical Plans Examiner certifications * WI architect registration OR * WI ...

Regal Rexnord

QA Inspector - 2nd Shift

Union Grove, WI · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Make dimensional and mechanical inspection and test of Gear Reducers, subassemblies, components and units to ensure conformance with quality and engineering specifications. * Check parts using ...

next page

Showing results 1-20

All JobsMechanical Inspector JobsMechanical Inspector Jobs in Wisconsin

Mechanical Inspector information

See Wisconsin salary details

$16

$29

$44

How much do mechanical inspector jobs pay per hour?

As of Aug 13, 2026, the average hourly pay for mechanical inspector in Wisconsin is $29.59, according to ZipRecruiter salary data. Most workers in this role earn between $24.52 and $32.50 per hour, depending on experience, location, and employer.

What are the key skills and qualifications needed to thrive as a mechanical inspector, and why are they important?

To thrive as a Mechanical Inspector, you need a solid understanding of mechanical systems, blueprint reading, and quality assurance principles, typically supported by a relevant technical degree or certification. Familiarity with inspection tools, measurement devices, and standards such as ASME or ISO is commonly required. Attention to detail, problem-solving ability, and effective communication are standout soft skills in this role. These competencies are crucial for ensuring that mechanical components meet safety, reliability, and regulatory standards in various industries.

What are some common challenges mechanical inspectors face when working on large-scale projects?

Mechanical Inspectors working on large-scale projects often encounter challenges such as coordinating inspections across multiple teams, ensuring compliance with strict safety and quality standards, and managing tight deadlines. They must frequently review complex technical drawings and specifications, requiring strong attention to detail and effective communication with engineers, contractors, and project managers. Adapting to changing project scopes and resolving discrepancies quickly are essential for maintaining project timelines and quality.

What is the difference between Mechanical Inspector vs Mechanical Technician?

AspectMechanical InspectorMechanical Technician
CertificationsASNT, API, or equivalent quality assurance certificationsTechnical diplomas or certifications in mechanical systems
Work EnvironmentInspection sites, quality control labs, manufacturing facilitiesMaintenance workshops, installation sites, repair facilities
Primary ResponsibilitiesInspect and verify mechanical components meet standardsInstall, maintain, and repair mechanical systems

Mechanical Inspectors focus on quality assurance and compliance through inspections, while Mechanical Technicians handle installation, maintenance, and repairs. Both roles often work in manufacturing or industrial settings and may require similar certifications, but their core duties differ significantly.

What does a mechanical inspector do?

A Mechanical Inspector is responsible for examining and testing mechanical systems, equipment, and installations to ensure they meet safety standards, codes, and regulations. Their duties often include reviewing blueprints, conducting on-site inspections, documenting findings, and recommending corrective actions if any deficiencies are found. Mechanical Inspectors work in a variety of industries, such as construction, manufacturing, and facilities maintenance, to help ensure that machinery and systems operate safely and efficiently.

What does a mechanical inspector do?

A mechanical inspector performs a variety of quality assurance duties related to building codes and electrical maintenance. Your responsibilities include inspecting the installation and upkeep of all kinds of electrical and mechanical systems, such as furnaces, boilers, HVAC or air conditioning systems, and elevators in residential and commercial buildings. You inspect these systems to ensure they are functioning properly and do not violate any building or safety codes. You may work on construction sites to observe the installation and technical calibration of systems, or for existing buildings to write reports based on your inspections.

More about Mechanical Inspector jobs
What are popular job titles related to Mechanical Inspector jobs in Wisconsin? For Mechanical Inspector jobs in Wisconsin, the most frequently searched job titles are:
What job categories do people searching Mechanical Inspector jobs in Wisconsin look for? The top searched job categories for Mechanical Inspector jobs in Wisconsin are:
What are popular job titles related to Mechanical Inspector jobs in WI? For Mechanical Inspector jobs in WI, the most frequently searched job titles are:
Mechanical Inspector jobs near you
Infographic showing various Mechanical Inspector job openings in Wisconsin as of August 2026, with employment types broken down into 88% Full Time, 9% Part Time, 2% Contract, and 1% Nights. Highlights an 97% Physical, 1% Hybrid, and 2% Remote job distribution, with an average salary of $61,557 per year, or $29.6 per hour.

CMM Operator / Mechanical Inspector

Generac

Whitewater, WI • On-site

$25 - $33/hr

Full-time

This job post has expired today. Applications are no longer accepted.

Generac Power Systems rating

7.0

Company rating: 7.0 out of 10

Based on 66 frontline employees who took The Breakroom Quiz

351st of 488 rated machine equipment manufacturers

Job description

We believe power is a promise - a shared commitment to be there for others when it matters most.

For more than 65 years, we've turned big ideas into solutions that help protect homes, strengthen businesses and build a more resilient, efficient, sustainable energy future.


Ready to Power a Smarter World with us?


Hours: 5:00am-3:00pm Tuesday-Friday

Job Summary:

CMM Operator/Inspector is responsible for performing inspections of components at receiving inspection utilizing various metrology hand gages and equipment and running (CMMs) coordinate measurement machines (selecting correct programs, setup of fixtures to run parts, calibration and running programs to facilitate the parts inspection process for our internal customers. Additionally, this role drives data collection, reporting and analysis.

Responsibilities:

  • Inspect samples per documented specifications
  • Record inspection results
  • Follow inspection procedures to measure engineering requirements
  • Coordinate the flow of inspection samples based on priority
  • Analyze data to determine trends in inspection history
  • Perform inspections using mechanical gauging as required
  • Diagnose minor issues and adjust CMM programs to run parts
  • Develop inspection procedures to measure engineering requirements
  • Lead Advance Gauge R&R studies
  • Lead employee quality training programs and communications
  • Train and mentor lab personnel on techniques for the CMM
  • Utilize bridge and portable CMMs (Romer Arm, Faro Arm, etc)
  • Proactively engage in the process to assist in ensuring processes are continually effective
  • Convert PPAP programs to Receiving Inspection programs
  • Creating custom programs from existing programs
  • Identify appropriate gauging needed to measure engineering drawing requirements
  • Visually identify sample status
  • Assist in cost reduction opportunities and design change suggestions
  • Addressing Non-Conformance
  • Identify and contain nonconforming material
  • Create and communicate Nonconforming Material Reports
  • Identify Corrective Action Opportunities
  • Identify and communicate Engineering Change Request (ECT) opportunities
  • Support Department Initiatives
  • Investigate, document and resolve minor issues related to the CMM
  • Support cross-functional team projects
  • Identify quality improvements, cost reduction opportunities, and design change suggestions

Requirements:

  • High school diploma or equivalent (GED)
  • Minimum 1 year experience operating a CMM
  • Minimum 1 year experience utilizing a variety of mechanical gaging or comparable manufacturing experience
  • Proficient at reading drawings

Additional Requirements:

Knowledge / Skills / Abilities

  • Strong attention to detail to ensure accuracy and consistency in measuring components and reporting
  • Ability to work independently and as a team
  • Strong analytical skills
  • Effective verbal and written communication skills
  • Ability to train other and modify training to accommodate learning preferences
  • Demonstrated ability to interpret drawing specifications
  • Experience with Production Part Approval Process (PAPP)
  • Ability to use Microsoft Office Suite
  • Demonstrated problem solving skills

Level of Independence:

This position act under the direction of the Quality Supervisor or Manager

Physical Demands: While performing the duties of this job, the employee is regularly required to talk and hear; and use hands to manipulate objects or controls. The employee is regularly required to stand and walk. On occasion the incumbent may be required to stoop, bend or reach above the shoulders. The employee must occasionally lift up to 25 - 50 pounds. Specific conditions of this job are typical of frequent and continuous computer-based work requiring periods of sitting, close vision and ability to adjust focus. Occasional travel.

"We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability status, protected veteran status, or any other characteristic protected by law."

What Generac Power Systems employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply