ZipRecruiter

Log In

1

Lighting Inspection Jobs in Raleigh, NC (NOW HIRING)

Lincoln Property Company

Building Engineer

Raleigh, NC · On-site

Perform scheduled maintenance, repairs, and inspections of building systems; address service requests, including hot/cold calls, plumbing issues, and lighting repairs. * Troubleshoot minor equipment ...

The Keith Corporation

Electrician II

Durham, NC · On-site

$30 - $34/hr

... inspection, testing, etc. of all fire and life safety systems, electronic security systems, etc. Essential Functions: * Maintain and repair all lighting throughout the facility and grounds * Perform ...

Turf Titanz NC Inc

Irrigation Technician

Youngsville, NC

$22 - $30/hr

Ensure weekly inspections and maintenance are completed on assigned truck, trailer, and equipment ... Troubleshoot and repair irrigation and low voltage lighting systems, usually working alone. * Load ...

1 point system

Senior Substation Engineer

Cary, NC · On-site

$91K - $116K/yr

... lighting and security. * Develops substation calculations, including, but not limited to ... Supports field inspections for substation facilities on public and private utility systems.

1 point system

Electrical Substation Engineer

Cary, NC · On-site

$91K - $116K/yr

... lighting and security. * Develops substation calculations, including, but not limited to ... Supports field inspections for substation facilities on public and private utility systems.

McAdams

Construction Observer

Raleigh, NC · On-site

Apply local lighting standards to measure light levels in support of lighting compliance ... Participate in Hydrant Flow Tests and Confined Space Inspections * Apply current accessibility ...

McAdams

Construction Observer

Raleigh, NC · On-site

Apply local lighting standards to measure light levels in support of lighting compliance ... Participate in Hydrant Flow Tests and Confined Space Inspections * Apply current accessibility ...

TLC Operations, Inc

Maintenance Technician

Raleigh, NC · On-site

$18.50 - $20/hr

Perform regular inspections and preventive maintenance * Respond promptly to repair requests with minimal disruption * Maintain HVAC, plumbing, electrical, lighting, and structural systems * Assist ...

RATP Dev USA

Mechanic-A

Raleigh, NC

... exterior lighting, gauges and controls, safety equipment, fire suppression system and sensitive ... Inspect / diagnose / repair / replace brake systems, fuel and emission systems, drivelines ...

RATP DEV USA

Mechanic-B

Raleigh, NC · On-site

$31/hr

... exterior lighting, gauges and controls, safety equipment, fire suppression system and sensitive ... Inspect / diagnose / repair / replace brake systems, fuel and emission systems, drivelines ...

next page

Showing results 1-20

All JobsLighting Inspection JobsLighting Inspection Jobs in Raleigh, NC

Lighting Inspection information

See Raleigh, NC salary details

$10

$19

$30

How much do lighting inspection jobs pay per hour?

As of Jun 22, 2026, the average hourly pay for lighting inspection in Raleigh, NC is $19.27, according to ZipRecruiter salary data. Most workers in this role earn between $14.95 and $21.97 per hour, depending on experience, location, and employer.

What are the key skills and qualifications needed to thrive as a Lighting Inspector, and why are they important?

To thrive as a Lighting Inspector, you need a strong understanding of electrical systems, lighting codes, and inspection protocols, often supported by relevant vocational training or certification. Familiarity with inspection software, electrical testing tools, and digital reporting systems is typically required. Attention to detail, effective communication, and problem-solving skills set outstanding inspectors apart. These abilities ensure that lighting installations meet safety standards and regulatory requirements, reducing risks and ensuring compliance.

How much do electrical inspectors make?

Electrical inspectors, including those performing lighting inspections, typically earn an average annual salary of around $60,000 to $75,000 in Texas. Salaries vary based on experience, certifications, and the complexity of inspections performed.

How much do lighting people get paid?

Lighting inspection professionals typically earn between $15 and $30 per hour, depending on experience, location, and the complexity of the projects. Entry-level inspectors may start at lower wages, while experienced inspectors with certifications can earn higher salaries or hourly rates. Many work full-time on construction sites, theaters, or film productions, often requiring knowledge of safety standards and lighting equipment.

What is the difference between Lighting Inspection vs Electrical Inspector?

AspectLighting InspectionElectrical Inspector
CertificationsLighting-specific certifications, such as Lighting CertificationElectrical certifications, like NICET or state electrical licenses
Work EnvironmentFocuses on lighting systems, fixtures, and compliance in various settingsEnforces electrical codes, inspects wiring, panels, and electrical installations
Industry UsageUsed in construction, commercial, and residential lighting projectsApplied across construction, industrial, and infrastructure electrical systems

Lighting Inspection primarily focuses on evaluating lighting systems for safety, efficiency, and compliance, while Electrical Inspectors oversee broader electrical systems and wiring. Both roles require related certifications and are integral to construction and safety standards, but they differ in scope and specific expertise.

What type of inspector gets paid the most?

In the lighting inspection field, senior or specialized inspectors with extensive experience, certifications, or expertise in complex systems tend to earn higher salaries. Inspectors working in high-risk environments or for large construction projects may also receive higher pay. Advanced knowledge of electrical codes and safety standards can contribute to increased earnings.

What are some common challenges lighting inspectors face when evaluating large commercial properties?

Lighting inspectors assessing large commercial properties often encounter challenges such as accessing hard-to-reach fixtures, coordinating inspections around building occupants, and keeping track of complex lighting systems. Additionally, they must ensure compliance with both safety and energy efficiency regulations, which can vary by jurisdiction. Effective communication with building managers and maintenance teams is crucial to address issues promptly and minimize disruptions to business operations.

What qualifications do you need to be a light technician?

To become a lighting technician, relevant qualifications include a high school diploma or equivalent, technical training or an apprenticeship in lighting or stage technology, and knowledge of lighting equipment and electrical safety. Certifications such as OSHA safety training or industry-specific courses can enhance job prospects, and hands-on experience with lighting systems is highly valued.

What is lighting inspection?

Lighting inspection is the process of examining lighting systems in buildings, outdoor areas, or infrastructure to ensure they are functioning properly, meet safety standards, and comply with relevant codes. Inspectors check for issues such as faulty wiring, inadequate illumination, damaged fixtures, and non-compliance with energy efficiency regulations. Regular lighting inspections help prevent accidents, improve energy usage, and prolong the lifespan of lighting components.
What are popular job titles related to Lighting Inspection jobs in Raleigh, NC? For Lighting Inspection jobs in Raleigh, NC, the most frequently searched job titles are:
What job categories do people searching Lighting Inspection jobs in Raleigh, NC look for? The top searched job categories for Lighting Inspection jobs in Raleigh, NC are:
What cities near Raleigh, NC are hiring for Lighting Inspection jobs? Cities near Raleigh, NC with the most Lighting Inspection job openings:
Lighting Inspection jobs near you
Building Engineer

Building Engineer

Lincoln Property Company

Raleigh, NC • On-site

Other

Posted 21 days ago

Lincoln Property rating

8.7

Company rating: 8.7 out of 10

Based on 15 frontline employees who took The Breakroom Quiz

12th of 154 rated real estate companies

Job description

The Building Engineer I is responsible for maintaining, operating, and troubleshooting building systems, including HVAC, plumbing, and electrical systems, focusing on performing routine maintenance tasks, responding to tenant requests, and ensuring systems operate safely under the guidance of senior engineers.

Essential Duties and Responsibilities:

  • Perform scheduled maintenance, repairs, and inspections of building systems; address service requests, including hot/cold calls, plumbing issues, and lighting repairs.
  • Troubleshoot minor equipment malfunctions and escalate issues as needed.
  • Replace light fixtures, filters, and other components as required.
  • Maintain accurate records of inspections and equipment performance.
  • Interact with tenants, contractors, and property managers and work closely with senior engineers and technicians to support smooth building operations and resolve tenant issues.
  • Assist with preventive maintenance tasks and contractor oversight.
  • Conduct property inspections to identify deficiencies.
  • Record equipment readings and ensure assigned building systems are operating according to standards.
  • Follow company safety protocols and wear appropriate PPE; ensure compliance with OSHA, NEC, NFC, NFPA regulations; report safety hazards; participate in safety inspections.
  • Provide guidance to junior Technicians when needed.
  • Communicate verbally and in writing with teammates, leadership team, vendors, tenants, and client employees in a professional manner, keeping the appropriate customer(s) informed/updated as needed.
  • Work closely with senior engineers to develop technical skills and participate in professional development programs to grow into advanced roles.
  • Perform other duties as assigned.

Qualifications:

  • HS Diploma or GED required
  • Two to three years of job related experience or commensurate certification/trade experience
  • CFC Certification preferred or willingness to obtain as requested; possess engineering and trade licenses required according to local, state, or national requirements
  • Basic working knowledge of laptop and phone applications for work order and facility operation systems as well as basic skills with Microsoft Outlook
  • Familiar with fire/life safety equipment/procedures
  • Proven track record for delivering excellent internal and external customer service; ability to successfully interact/communicate with tenants/vendors/contractors as well as teammates and leadership team
  • Familiarity with blueprints and code requirements
  • Ability to work after hours, weekends, holidays, and during emergency situations as necessary to meet the needs of the client
  • Possess competent knowledge of use and care of tools
  • Ability to read and write English in order to understand manuals and procedures, and to write reports.
  • Exhibit a willingness to develop familiarity with HVAC, electrical, and plumbing systems and gain experience with BAS operation and troubleshooting.

Physical Requirements:

Ability to stand, walk, climb ladders, and lift up to 50 pounds; perform physically demanding tasks such as stooping, crouching, and kneeling.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

This position is 100% in-office. The role requires working in office during standard business hours. Remote work or telecommuting is not an option for this position.

#IND123

What Lincoln Property employees say

Pay

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply