Integrated Systems Jobs (NOW HIRING)

Summary
This is an Air Reserve Technician (ART) position. ARTs are part of the regular career civil service and enjoy all the benefits granted to Federal employees in the competitive civil service. In addition, ARTs are required to maintain their active membership in the AF Reserve unit where assigned. ARTs receive on average one weekend of military training per month.
Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information.
Learn more about this agency
Duties
Help
The primary purpose of this position is: to remove, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild integrated electronic avionics systems where the output of a number of sensor subsystems is integrated into a logic subsystem and the resultant used to modify the operation of the total system. The worker in this career field must demonstrate the ability to perform maintenance on one or more complete electronic integrated systems associated with the assigned aircraft and/or maintenance on automatic flight control systems, instrument systems, environmental systems, radar, communications, and navigation systems. Provides training to traditional reservist and other assigned personnel in the accomplishment of tasks herein.
Duties:
1: Removes, installs, modifies, overhauls, maintains, troubleshoots, repairs, aligns, calibrates, and rebuilds integrated electronic avionics systems where the output of a number of sensor subsystems is integrated into a logic subsystem and the resultant used to modify the operation of the total system.
2: Performs pretest, operational (functional), or final testing of electronic systems, components, or subassemblies. Prepares/executes effective training plans to maximize training and complies with security procedures, regulations and policies.
3: (Electro-Environmental) Installs, inspects, modifies, repairs, services, replaces, adjusts and overhauls complex integrated electrical/ environmental systems, both on and off equipment, to include, but not limited to: oxygen, fire suppression, air conditioning, pressurization, ice/rain protection, bleed air systems, avionics cooling systems, cargo/mission handling, missile interface units/bomb doors, anti-skid systems, landing gear, ignition, stall warning, flight control, AC/DC power supply and distribution, Integrated Drive Generator, fuel and explosive systems.
4: Advises engineering personnel on the operation and maintenance effects of proposed Time Compliance Technical Orders (TCTO) and/or modifications on new or existing equipment.
5: Utilizes safety practices and tool control procedures following established safety rules and regulations to maintain a safe and clean work area.
Requirements
Help
Conditions of employment

• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• A security clearance may be required
• If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
• This posn is subject to provisions of the DoD Priority Placement Program
• Position may be subject to random drug testing
• Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays
• Shift work and emergency overtime may be required
• Employee must maintain current certifications
• Disclosure of Political Appointments
• Must be a current member of the AF Reserve or willing/qualified to join
• Advance in hire may be authorized if there is demonstrable proof provided on your resume
• Recruitment Incentive may be authorized for this position
• Relocation Incentive may be authorized for this position
• Leave accrual may be authorized upon request
• Direct Deposit: All federal employees are required to have direct deposit.
• Depending on the type of position (competitive/excepted) you are selected for, you will be required to serve a 1-year probationary period OR 2-year trial period.
• Upon completion of your probationary/trial period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
• AFSC/Rank: 2A9X4 /SSGT

Qualifications
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C for WG-2600 - Electronic Equipment Installation and Maintenance Family.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-2600 - Electronic Equipment Installation and Maintenance Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is the ability to do the work of an Electronic Integrated Systems Mechanic without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of electronic and environmental theories and practices of one or more complex integrated systems such as fire control, navigation, or automatic landing control systems; of integrated electronic, pneumatic, hydraulic, optical, fiber-optic, and mechanical systems; of such applications as radar, digital or analog computers, digital display devices, equipment cooling, and of the technology and practices which integrate these components into a total functional system; and of mathematics including algebra and trigonometric functions to adapt standard function to the specific requirements of the integrated systems.
2. Skill in the use of standard hand and power tools of the electronics trade. Skill in the set up and operation of computer controlled automated test equipment (ATE) and test stands, oscilloscopes (dual trace, storage, digitized), spectrum, network and distortion analyzers, frequency counters, and signal generators; in interpreting complex drawings, specifications, and schematics of complete integrated systems to recognize the function and interconnections of components, assemblies, subassemblies, and connecting cable/fiber-optics harness; and in troubleshooting, installing, repairing, and maintaining electronic integrated systems where circuit theory must be used to understand the operation of a large number of circuits and functions, and the interaction of subsystems which create malfunctions. Skill in calibrating and adjusting components such as amplifiers, proximity boxes, generators, and voltage regulators.
3. Comprehensive knowledge of testing and troubleshooting techniques and procedures utilizing a variety of test devices and ability to analyze, modify, and repair complex electrical or environmental systems and components on assigned aircraft. Comprehensive knowledge of operation, capabilities and limitations of complex electronic systems complicated by a variety of multi component assemblies and devices.
4. Ability to read and interpret a variety of technical data such as schematic diagrams, blueprints and technical orders relating to the electronics trade. Ability to use a variety of electronic, electrical, or electromechanical test and measurement equipment. Ability to effectively communicate with workers and supervisors in English using both oral and written reports. Knowledge of USAF Technical Order Program and its procedures.
5. Ability to interpret and comply with regulations and instructions on security, safety, documentation, and other publications governing the performance of duties. Ability to effectively communicate with workers and supervisors in English using both oral and written reports. Ability to effectively communicate with workers and supervisors in English using both oral and written reports. Ability to clean work area and/or job site upon completion of work.
6. Basic computer skills are required. Individual must be able to access and use computer-based maintenance documentation and supply systems and be capable of assimilating training on new systems as they are developed and implemented.
OTHER SIGNIFICANT FACTS:
1. This is an Air Reserve Technician (ART) position. The incumbent is required to meet and maintain Air Force Reserve requirements. Work schedule will be aligned to allow incumbent to fully participate in unit training assemblies (UTA). The incumbent's regular assignments are ART duties; however, the incumbent may be assigned some non-ART duties, generally not to exceed 30 percent of total responsibilities.
2. The incumbent must obtain and retain Secret security clearance level designated for the position.Performs other duties as assigned.
3. The incumbent may be required to fly in military and/or commercial aircraft to perform temporary duty assignments (TDY) away from the normal duty station.
4. The incumbent may be required to work overtime to meet workload demands. May be subject to shift work and uncommon tours of duty.
5. Maintains job proficiency by reading/reviewing new or revised technical orders or related publications and by completing applicable CDC, OJT, and FTD classes as required.
6. The work may require the employee to drive a motor vehicle. An appropriate, valid driver's license may be required.
(Continued under Education)
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Education
FUNCTIONAL REQUIREMENTS: Heavy lifting (up to 40 lbs.). Two-man lift for items exceeding 40 lbs. Heavy carrying (40 lbs.). Reaching above the shoulder. Use of fingers. Both hands are required. Hours of walking are approximately 4 hours/day. Hours of standing are approximately 4 hours/day. Hours of repeated bending are approximately 4 hours/week. Climbing, use of legs and arms. Both legs required. Operation of special purpose and/or motor vehicles. Near vision correctable at 13 inches to 16 inches to Jaeger 1 to 4. Far vision correctable in one eye to 20/20 and 20/40 in the other. Depth perception. Ability to distinguish basic colors. Ability to distinguish shades of color. Hearing (with or without aid permitted). If it can be otherwise accommodated, a specific physical condition or impairment will not automatically disqualify a candidate.
ENVIRONMENTAL FACTORS: Work is performed in hanger areas, outdoors, in parked aircraft, and sometimes in hazardous noise areas. Working around machinery with moving parts. Working around moving objects or vehicles. Works inside and out, on wet, slippery/uneven surfaces, ramps, aircraft surfaces and work stands. Exposed to extremes in heat, cold, humidity and inclement weather. Subject to the dangers from exposure to toxic fumes, fuel, high pressure air and fluids, electrical shock or burns caused by electrical or RF energy. Dangers also include engine noise, blast, ingestion, and fast actuating metal surfaces such as landing gears, and flaps. Must work in confined areas and in awkward positions. Exposed to dirt, grease, and aircraft fluids, oil, hydraulic fluid, solvents, and hazardous fluids and gases such as Halon. Subject to cuts, bruises, muscle strain, and injury from falls off scaffolds, ladders, stands, and aircraft surfaces. Working closely with others. Working alone.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here. To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information.
Current Federal Civilian employees may apply for temporary and term positions and if selected, a break in service may be required prior to appointment to the position.
Temporary and Term Appointments: If you are selected for a temporary or term position in the competitive service, your appointment may be extended to the maximum period allowed by law without further competition.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click