ZipRecruiter

Log In

1

Injection Mold Setter Jobs (NOW HIRING)

AHU Technologies, Inc.

- Mold Setter

Washington, DC · On-site

$18 - $25/hr

The Mold Setter performs all the mold set-up functions for production's needs within the department ... This would include but not be limited to setting molds in injection plastic machines with all ...

SANKO GOSEI TECH

Mold Setter

Fort Wayne, IN · On-site

$16.50 - $19.50/hr

The Mold Setter will be the primary performer of mold changes on their respective shifts. The ... Sanko Gosei Technologies USA Incorporated is a custom injection molding company that strives to:

RD Industries, inc.

1st Shift Mold Setter

Omaha, NE

$15.50 - $18.25/hr

Summary The Mold Setter installs molds in injection molding machines. Sets up established molding processes for production. Monitors molding processes to ensure product quality meets internal and ...

Novatech

Mold Setter

Austintown, OH · On-site

$14.25 - $16.75/hr

We are looking to add a mold setter ,in our Austintown, Ohio, facility. What we have to offer ... Experience and understanding of injection molding and auxiliary equipment is needed * Ability to ...

RD Industries

1st Shift Mold Setter

Omaha, NE · On-site

$17.25 - $20.25/hr

Summary The Mold Setter installs molds in injection molding machines. Sets up established molding processes for production. Monitors molding processes to ensure product quality meets internal and ...

J&O Plastics, Inc.

Mold Setter

Rittman, OH · On-site

$17 - $20/hr

J &O Plastics, a leading manufacturer of quality custom injection molding is a dynamic growing ... The Injection Mold Tool Setter is responsible for all mold changes (set up and removal), as well as ...

JVIS

Mold Setter

Clinton Township, MI

$16.25 - $19.25/hr

The Mold Setter's primary responsibility is to ensure a correct and proper mold change is done and ... Lube machine- fill reservoir, lube injection end, wipes off excess grease on and around the ...

Plasman

Mold Setter - 3rd Shift

Greer, SC

$17.25 - $20.50/hr

Injection Mold Setter Key Responsibilities * Safely operate PIT's and overhead crane in order to deliver/install materials/molds to the injection molding department. * Properly load molds into the ...

JVIS

Mold Setter

Clinton Township, MI

$16.25 - $19.25/hr

The Mold Setter's primary responsibility is to ensure a correct and proper mold change is done and ... Lube machine- fill reservoir, lube injection end, wipes off excess grease on and around the ...

JVIS USA LLC

$16.25 - $19.25/hr

The Mold Setter's primary responsibility is to ensure a correct and proper mold change is done and ... Lube machine- fill reservoir, lube injection end, wipes off excess grease on and around the ...

Aerotek

Mold Setter

Lake Orion, MI

$37K/yr

Mold Setter - 2nd Shift This role sets up and changes molds on plastic extrusion and injection presses during 2nd shift in a clean, modern manufacturing facility. You will perform 4-5 mold changes ...

Checkpoint Systems

Be Seen First

Injection Mold Technician

Canton, OH · On-site

$26 - $30/hr

Job Highlights The Mold Setter / Assistant Supervisor is responsible for supporting shift ... plastic injection molding Knowledge, Skills & Abilities * Detail oriented with good mechanical ...

Lasko Products

Mold Setter I

Fort Worth, TX

$17.25 - $20.25/hr

/Summary The mold setter is responsible for positioning and setting up molds for the manufacturing ... Essential Functions * 1-3 years of experience setting up and operating mold injection equipment.

CivicMinds, Inc.

Injection Molding Technician

Hudson, NY · On-site

$22 - $29.50/hr

Loading material for production - Mold Mechanic: Ability to do cavity block and set changes on injection molds - Mold Setter: Install molds into the mold machine - Mold Processor: Performs process ...

TriMas Corporation

Molding Lead-3rd Shift

Auburn, IN

$18.75 - $24.25/hr

We are looking for an experienced Plastic Injection Mold Setter/Processor with proven experience in safely completing mold set-ups and processing to produce quality products. This person will work in ...

next page

Showing results 1-20

All JobsInjection Mold Setter Jobs

Injection Mold Setter information

See salary details

$14

$19

$27

How much do injection mold setter jobs pay per hour?

As of Jul 21, 2026, the average hourly pay for injection mold setter in the United States is $19.40, according to ZipRecruiter salary data. Most workers in this role earn between $17.31 and $20.43 per hour, depending on experience, location, and employer.

Is injection molding a good career?

Injection mold setters play a key role in manufacturing by setting up and maintaining injection molding machines, which are used to produce plastic parts. The job offers steady employment, requires technical skills, and often involves working in a factory environment with potential for overtime. It can be a stable career path for those interested in manufacturing and machinery operation.

What are injection mold setters?

Injection mold setters are skilled technicians responsible for installing, adjusting, and removing molds on plastic injection molding machines. They ensure that molds are properly aligned and secured to produce high-quality plastic parts. Mold setters also perform machine setup, troubleshoot issues, and make necessary adjustments to optimize production efficiency. Their role is critical in maintaining the smooth operation of manufacturing lines and ensuring product consistency.

What are some common challenges faced by Injection Mold Setters, and how can they be addressed?

Injection Mold Setters often face challenges such as minimizing equipment downtime, ensuring molds are properly aligned, and troubleshooting issues like material flow or part defects. These challenges can be addressed by maintaining a strong attention to detail, following standardized setup procedures, and collaborating closely with maintenance and quality control teams. Continuous training on new mold technologies and proactive communication with operators also help prevent issues and improve efficiency in production.

What are the key skills and qualifications needed to thrive as an Injection Mold Setter, and why are they important?

To thrive as an Injection Mold Setter, you need a solid understanding of injection molding processes, mechanical aptitude, and experience with mold setup and troubleshooting, often supported by a high school diploma or technical training. Familiarity with machinery such as injection molding presses, use of hand tools, and sometimes knowledge of programmable logic controllers (PLCs) are commonly required, along with safety certifications like OSHA. Attention to detail, problem-solving skills, and the ability to work efficiently in a team are crucial soft skills for this role. These skills ensure efficient production, minimize machine downtime, and uphold quality and safety standards in a manufacturing environment.

What is the difference between Injection Mold Setter vs Machine Operator?

AspectInjection Mold SetterMachine Operator
CredentialsTypically requires technical training or certification in mold settingUsually requires general manufacturing or machine operation training
Work EnvironmentSpecialized environment focused on mold setup and maintenanceBroader manufacturing environment operating various machines
Industry UsageCommon in plastics and injection molding industriesWidespread across multiple manufacturing sectors
Job FocusSetting up, adjusting, and maintaining molds for productionOperating machines to produce parts according to specifications

The main difference is that Injection Mold Setters focus on preparing and maintaining molds for injection molding machines, requiring specialized skills and certifications. Machine Operators, on the other hand, operate a variety of manufacturing equipment, including injection molding machines, but do not typically handle mold setup. Both roles are essential in manufacturing, but the Mold Setter has a more technical, specialized focus on mold preparation and maintenance.

What qualifications do you need for injection molding?

Injection mold setters typically need a high school diploma or equivalent, along with technical training or apprenticeship experience in mold setup and operation. Skills in reading blueprints, understanding machinery, and basic troubleshooting are important, and certifications in mold or machine operation can be beneficial.

How much does a mold setter make?

A mold setter typically earns between $15 and $25 per hour, with annual salaries ranging from approximately $30,000 to $50,000 depending on experience, location, and industry. Skilled setters who operate complex machinery or hold certifications may earn higher wages and additional benefits.

What is the typical injection molding salary?

The average salary for an injection mold setter in the United States ranges from $40,000 to $60,000 per year, depending on experience, location, and industry. Skilled setters with certifications and experience in operating and maintaining injection molding machines can earn higher wages, often supplemented with overtime and benefits.
More about Injection Mold Setter jobs
What job categories do people searching Injection Mold Setter jobs look for? The top searched job categories for Injection Mold Setter jobs are:
Injection Mold Setter jobs near you
Infographic showing various Injection Mold Setter job openings in the United States as of July 2026, with employment types broken down into 1% As Needed, 87% Full Time, 7% Part Time, 1% Temporary, 2% Contract, and 2% Nights. Highlights an 95% Physical, 2% Hybrid, and 3% Remote job distribution, with an average salary of $40,342 per year, or $19.4 per hour.

Injection Molding Mold Technician

MMI Injection Molding

Saline, MI • On-site

$21 - $23/hr

Other

Posted 12 days ago

Job description

MMI Engineered Solutionsis growing and looking for a driven **Mold Technician **to join our team at our plastic injection molding facility in Saline, Michigan. The Mold Setter is responsible for setting molds using established processes, and supporting daily injection molding operations to ensure safe, efficient, and high-quality production.

This role works closely with the Shift Supervisor, Process Technicians, Material Handlers, and Operators to complete mold setups, startups, shutdowns, and troubleshooting activities while maintaining process standards and production schedule

Schedule Options:

A Shift: Monday through Wednesday 6:00am-12:15pm, and alternating Thursday/Friday or Saturday/Sunday 6:00am-6:15pm.

B Shift: Monday through Wednesday 12:00pm-6:15pm, and alternating Thursday/Friday or Saturday/Sunday 6:00am-6:15pm.

D Shift: Monday through Wednesday 12:00am-6:15am, and alternating Thursday/Friday or Saturday/Sunday 6:00pm-6:15am.

Key Responsibilities

  • Perform mold setups and changeovers according to established process guidelines and production scheduled.

  • Prepare and stage molds, thermolators, DME units, hoses, hydraulic units, fixtures, gauges, and related equipment required for mold setups.

  • Follow all safety procedures, including Lock-Out/Tag-Out, during mold installation

  • Review setup documentation, quality books, process sheets, and work instructions prior to mold installation and startup.

  • Coordinate with the Shift Supervisor and Material Hnadler to support production schedules and ensure work centers are prepared for upcoming jobs.

  • Tear down molds after production runs and properly store molds and auxiliary equipment.

  • Identify and communicate any mold quality or safety concerns before and during installation

Qualifications

  • 2–5 years of plastic injection molding and mold setup experience

  • Experience performing mold changes in a manufacturing environment

  • Material Technician experience preferred

  • Strong mechanical aptitude and problem-solving skills

  • Ability to read and follow technical instructions and setup documentation

  • Forklift and overhead crane experience preferred

  • Good teamwork, communication, and time management skills

  • Basic computer skills (spreadsheets, work instructions, etc.)

Work Environment

  • Ability to work in manufacturing environment, standing for 8 or more hours per day in an environment that may be noisy, hot, and messy.

  • Ability to lift items up to 50lbs

  • Abilit to reach, bend, twist, climb

  • Ability to lift and move tooling and setup equipment safely.

You should be proficient in:

  • Lockout/Tagout (LOTO)
  • Injection Molding Experience
  • Tool/Die/Mold Setup Experience

Machines & technologies you'll use:

  • Injection Molding Machine (Nissei)
  • Overhead Crane
  • Forklifts