ZipRecruiter

Log In

2

Full Time Micro Welding Jobs (NOW HIRING)

Recco Products

General Production

Wayland, MI · On-site

$14.25 - $17.25/hr

... Type: Full-time, Non-Exempt About Us: Recco Products is a leader in precision micro-filter ... Resistance Welding Operators * Machine Operators * Kick Press Operators * Assembly Operators

Recco Products

General Production

Wayland, MI · On-site

$14.50 - $17.50/hr

... Type: Full-time, Non-Exempt About Us: Recco Products is a leader in precision micro-filter ... Resistance Welding Operators * Machine Operators * Kick Press Operators * Assembly Operators

Crissair, Inc.

Dynamic Technician I

Valencia, CA · On-site

$21.78 - $26.13/hr

Set up and operate micro laser weld machine. * Set up and operate drill press for crimp roll ... full time employees: * Medical (PPO or HMO), Dental, and Vision Insurance * Healthcare Flexible ...

QuinStar Technology, Inc

MIC Assembler I

Torrance, CA · On-site

$18.69 - $21.22/hr

Job Type Full-time Description The MIC Assembler I is an entry-level role responsible for helping ... welding operations with a high degree of accuracy and consistency. • Operate specialized ...

Lokar, Inc

Manufacturing / Process Engineer

Knoxville, TN · On-site

$70K - $93K/yr

Job Type Full-time Description Lokar Performance Products is seeking a confident and capable, upper ... This person should have the confidence to succeed without micro-management and the humility to ...

MicroPrecision

Maintenance Technician 4

Delavan, WI · On-site

$34 - $43/hr

Full-Time, M-F 1st Shift: 6:00 am - 2:30 pm Salary Range: $34-43 hourly DOE Machines you will work ... Knowledge of proximity switches, reed switches, micro switches, encoders, servo motors, motors ...

next page

Showing results 1-20

All JobsMicro Welding JobsFull Time Micro Welding Jobs

Full Time Micro Welding information

See salary details

$24

$41

$56

How much do full time micro welding jobs pay per hour?

As of Jun 9, 2026, the average hourly pay for full time micro welding in the United States is $41.61, according to ZipRecruiter salary data. Most workers in this role earn between $34.38 and $47.36 per hour, depending on experience, location, and employer.

What is the difference between Full Time Micro Welding vs Full Time TIG Welding?

AspectFull Time Micro WeldingFull Time TIG Welding
CertificationsMicro welding certifications, such as micro welding technicianTIG welding certifications, such as AWS Certified Welder
Work EnvironmentPrecision work on small components, often in electronics or medical device manufacturingGeneral metal fabrication, automotive, aerospace industries
Industry UsageElectronics, medical devices, jewelryConstruction, automotive, aerospace

Full Time Micro Welding focuses on precision welding of tiny components using specialized equipment, often requiring micro welding certifications. In contrast, Full Time TIG Welding involves welding larger metal parts with a tungsten inert gas process, requiring TIG welding certifications. Both roles are essential in manufacturing but serve different industries and work environments.

More about Full Time Micro Welding jobs
What are the most commonly searched types of Micro Welding jobs? The most popular types of Micro Welding jobs are:
What job categories do people searching Full Time Micro Welding jobs look for? The top searched job categories for Full Time Micro Welding jobs are:
Full Time Micro Welding jobs near you
Infographic showing various Full Time Micro Welding job openings in the United States as of June 2026, with employment types broken down into 1% Locum Tenens, 62% Full Time, 33% Part Time, and 4% Contract. Highlights an 90% Physical, 5% Hybrid, and 5% Remote job distribution, with an average salary of $86,554 per year, or $41.6 per hour.
Quality Technician I - 1st Shift

Quality Technician I - 1st Shift

Cadrex Manufacturing Solutions

WI • On-site

$18.75 - $25.25/hr

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Posted 17 days ago

Cadrex rating

6.2

Company rating: 6.2 out of 10

Based on 11 frontline employees who took The Breakroom Quiz

Job description

OVERVIEW
Cadrex is searching for a Quality Technician I to directly support our manufacturing practices through development, evaluation, and continual improvement of processes using quality concepts, principles and methodologies with the goal of consistently meeting or exceeding customer expectations of quality.
KEY RESPONSIBILITIES
  • Release product for shipping by ensuring proper documentation/certifications are provided as outlined by customer requirements
  • Understand and apply basic GD&T concepts
  • Proficient in dimensional verification of PPAP and first article parts
  • Provide direct support to the production floor by assisting with interpretation/development of manufacturing related documentation and providing or teaching proper measuring techniques
  • Provide technical inspection of manufactured and raw materials at "receiving" as outlined by the process
  • Collect data, evaluate, and present quality metrics
  • Program and operate FARO & Micro-Vu measurement equipment proficiently
  • Attend department meetings as required

Requirements
PREFERRED QUALIFICATIONS
  • 1+ years working preferably in a metal fabrication environment under a continuous improvement QMS with hands on inspection or an equivalent combination of education and experience
  • Read and comprehend simple instructions, short correspondence, and memos. Write simple correspondence
  • Effectively present information in one-on-one and small group situations to customers, clients, and other employees
  • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals
  • Ability to compute rate, ratio, and percentage and to draw and interpret graphs
  • Knowledge of word processing software, spreadsheet software, e-mail software and the use of the Internet
  • Certification as a Quality Technician preferred
  • Programming for FARO and Micro-Vu Measurement Equipment desired

EDUCATION
  • Associate degree in related field preferred

LOCATION
  • Onsite

SCHEDULE
  • Monday-Thursday; 5:45am-4:15pm

TOTAL COMPENSATION INCLUDES
  • Health/dental/vision coverage
  • Employer-paid and supplemental life insurance
  • Short- and long-term disability insurance
  • Generous paid time off and holiday pay
  • Monthly remote work stipend (for remote employees who qualify)
  • 401(k) investment plan, with an employer match of up to 4%
  • Education support program
  • Safety eyeglasses/shoe reimbursement
  • Referral bonuses
  • Bonus plan for all full-time employees

WORK ENVIRONMENT
  • While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts and vibration. The employee is occasionally exposed to the risk of electrical shock. The noise level in the work environment is usually moderate and occasionally loud.

PHYSICAL DEMANDS
  • While performing the duties of this job, the employee is regularly required to stand, sit, use hands and fingers, handle or feel, and talk or hear. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision, depth perception and ability to adjust focus.

CADREX'S CORE VALUES
  • Safety first, rising to the challenge, collaboration, accountability, and doing the right thing

ABOUT US
CADREX Manufacturing Solutions is a leading provider of complex sheet metal and machined production parts, assemblies, and weldments for a variety of end markets, including electrical transmission and distribution, warehouse automation, technology, aerospace & defense, medical, food, and industrials. With locations in Colorado, Pennsylvania, Illinois, Washington, Wisconsin, Minnesota, Michigan, Indiana, Massachusetts, Oklahoma, and Monterrey Mexico, CADREX offers numerous in-house manufacturing capabilities, including laser cutting, sheet metal fabrication, complex assembly, CNC punching, CNC machining, forming, robotic welding, stamping, fastener insertion, and tool and die manufacturing, to effectively serve customers with lights-out manufacturing capabilities for mid- to high-volume production. For more information, visit www.cadrex.com.
Cadrex provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

What Cadrex employees say

Pay

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply