2

Entry Level Rf Design Engineer Jobs in California

Product RF Engineers should have a broad-based knowledge in RF architecture, design, integration ... RF design, wireless communications, EM, or circuits. Experience Level Entry Level Job Type ...

Product RF Engineer

San Diego, CA · On-site

$65 - $90/hr

Product RF Engineers should have a broad-based knowledge in RF architecture, design, integration ... RF design, wireless communications, EM, or circuits. Experience Level Entry Level Job Type ...

Product RF Engineers should have a broad-based knowledge in RF architecture, design, integration ... RF design, wireless communications, EM, or circuits. Experience Level Entry Level Job Type ...

Senior RF/MW Engineer

San Diego, CA · On-site

$90K - $130K/yr

Design, analyze, and validate RF and microwave mixed-signal circuits including amplifiers, mixers ... Education & Experience Master's degree in Electrical Engineering or related field with 5+ years of ...

Design, analyze, and validate RF and microwave mixed-signal circuits including amplifiers, mixers ... Education & Experience Master's degree in Electrical Engineering or related field with 5+ years of ...

next page

Showing results 1-20

Entry Level Rf Design Engineer information

What are the key skills and qualifications needed to thrive as an Entry Level RF Design Engineer, and why are they important?

To thrive as an Entry Level RF Design Engineer, you need a solid background in electrical engineering principles, especially in radio frequency theory, signal processing, and circuit design, typically supported by a relevant bachelor's degree. Familiarity with tools such as MATLAB, ADS (Advanced Design System), and network analyzers, as well as knowledge of industry standards, is highly valuable. Strong analytical thinking, attention to detail, and effective communication skills help set candidates apart in collaborative engineering environments. These competencies ensure accurate design, troubleshooting, and efficient teamwork, which are crucial for successful development and deployment of RF systems.

What are entry level RF Design Engineers?

Entry level RF (Radio Frequency) Design Engineers are professionals who are new to the field and assist in designing, developing, and testing RF circuits and systems used in wireless communication devices. They typically work under the guidance of senior engineers to create and optimize components such as antennas, transmitters, and receivers. These engineers use specialized software and equipment to analyze signal integrity, minimize interference, and ensure regulatory compliance. Their work is crucial in industries like telecommunications, aerospace, and consumer electronics.

What are some common challenges an Entry Level RF Design Engineer might face when starting out, and how can they overcome them?

As an Entry Level RF Design Engineer, you may encounter challenges such as understanding complex simulation tools, interpreting test results, and troubleshooting signal integrity issues. It's common to feel overwhelmed by the steep learning curve, especially when working with advanced equipment and adhering to strict industry standards. To overcome these challenges, it's helpful to seek mentorship from experienced team members, actively participate in project meetings to gain practical insights, and dedicate time to hands-on practice with simulation software. Building strong communication skills will also help you collaborate effectively with cross-functional teams, such as hardware and software engineers.

What is the difference between Entry Level Rf Design Engineer vs RF Test Engineer?

AspectEntry Level Rf Design EngineerRF Test Engineer
Required CredentialsBachelor's in Electrical Engineering or related; basic knowledge of RF principlesBachelor's in Electrical Engineering or related; focus on testing and measurement skills
Work EnvironmentDesign labs, R&D departments, engineering teamsTesting labs, production lines, quality assurance teams
Industry UsageDesigning RF components, circuits, and systemsTesting and validating RF devices and systems

While both roles require a background in electrical engineering and knowledge of RF principles, the Entry Level Rf Design Engineer focuses on designing RF components and systems, whereas the RF Test Engineer specializes in testing and validating these devices. Both roles are essential in the RF industry but serve different stages of product development and quality assurance.

What are the most commonly searched types of Rf Design Engineer jobs in California? The most popular types of Rf Design Engineer jobs in California are:
What are popular job titles related to Entry Level Rf Design Engineer jobs in California? For Entry Level Rf Design Engineer jobs in California, the most frequently searched job titles are:
What job categories do people searching Entry Level Rf Design Engineer jobs in California look for? The top searched job categories for Entry Level Rf Design Engineer jobs in California are:
Infographic showing various Entry Level Rf Design Engineer job openings in California as of June 2026, with employment types broken down into 1% Locum Tenens, 82% Full Time, 12% Part Time, 2% Temporary, and 3% Contract. Highlights an 96% Physical, 1% Hybrid, and 3% Remote job distribution.
Raytheon Full-time RF/Microwave Antenna Electrical Engineer I (Onsite)

Raytheon Full-time RF/Microwave Antenna Electrical Engineer I (Onsite)

Raytheon

El Segundo, CA

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Posted 2 days ago


Raytheon rating

9.1

Company rating: 9.1 out of 10

Based on 83 frontline employees who took The Breakroom Quiz

3rd of 521 rated manufacturers


Job description

Date Posted:

2026-06-17

Country:

United States of America

Location:

US-CA-EL SEGUNDO-R01 ~ 2000 E Imperial Hwy ~ BLDG R01

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

The ability to obtain and maintain a U.S. government issued security clearance is required.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.  

We are seeking an entry-level Radio Frequency (RF)/Microwave Antenna Engineer within our Airborne Radar Electronics Design Hardware Engineering directorate. This role will be an on-site position located in El Segundo, California.

What You Will Do:

  • The RF/Microwave Antenna Engineer will be responsible for participating in the development of state-of-the-art circulators, radiators, filters, and passive components.
  • The primary role for this individual will be to perform design analysis, verification, troubleshooting, and testing for circulators/radiators and RF/microwave sub-components used in phased array antennas.
  • The successful candidate will be capable of presenting technical information to peers and program leadership (customer exposure may occur with support).

What You Will Learn:

  • Gain experience modeling, integrating, and testing RF/microwave components used in phased array antennas, including circulators, radiators, filters, and other passive devices.
  • Strengthen teamwork and early leadership skills while contributing to the development of next‑generation antenna products.

Qualifications You Must Have:

  • Bachelor of Science (B.S.) in Electrical Engineering or related Science, Technology, Engineering or Mathematics (STEM)
  • The ability to obtain and maintain a U.S. government issued security clearance is required.
  • U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer:

  • Coursework or project experience involving antenna theory or RF/microwave component design
  • Ability to apply basic principles, theories, and concepts within the electrical engineering fields and general knowledge of other related disciplines
  • Experience reading technical drawings or electrical schematics (coursework or projects acceptable)
  • Hands-on lab experience with standard EE lab equipment (VNAs, power meters, oscilloscopes, spectrum analyzers, DMMs, signal generators, etc.)
  • Experience presenting technical information through school projects, internships, or extracurricular activities
  • Exposure to RF simulation tools such as CST or Ansys HFSS (coursework acceptable)
  • Familiarity with scientific programming or automation tools such as Python, LabVIEW, or MATLAB
  • Exposure to tools such as Keysight ADS or AutoCAD
  • Familiarity with engineering requirements or test documentation (coursework acceptable)
  • Exposure to one or more RF/microwave product areas such as phased arrays, feed networks, circulators, filters, or beamformers
     

What We Offer:

  • Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

Learn More & Apply Now! 

Please consider the following role type definition as you apply for this role

  • Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. 

Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: https://www.state.gov/m/ds/clearances/c10978.htm

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 62,900 USD - 119,700 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms


What Raytheon employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom