ZipRecruiter

Log In

2

Entry Level Injection Molding Technician Jobs (NOW HIRING)

Ammega

Injection Molding Technician

Reading, PA · On-site

$21.25 - $28.25/hr

Summary The Molding Technician 1 will be responsible for performing insert/impressions and/or ... the injection molding field. Strong attention to detail Ability to prioritize and follow-up on ...

AMMEGA

Injection Molding Technician

Reading, PA

$47K/yr

Summary The Molding Technician 1 will be responsible for performing insert/impressions and/or ... Knowledge of commonly used concepts, practices, and procedures within the injection molding field.

HiFyve

Injection Mold Technician

Columbus, OH · On-site

$32 - $36/hr

Full benefits package About the Role This role supports injection molding operations through mold ... Experience as a Mold Technician (injection molding preferred) * Strong troubleshooting and ...

Ammega

Injection Molding Technician

Reading, PA · On-site

$21.25 - $28.25/hr

Summary The Molding Technician 1 will be responsible for performing insert/impressions and/or ... injection molding field. • Strong attention to detail • Ability to prioritize and follow-up on ...

Advastar, Inc

Molding Technician

Kansas City, MO

$27 - $35/hr

If you know injection molding inside and out -- mold changeovers, setup, auxiliary equipment -- this is the kind of company where skilled technicians build long careers. * $27-$35/hour based on ...

Advastar, Inc

Molding Technician

Kansas City, MO

$27 - $35/hr

If you know injection molding inside and out -- mold changeovers, setup, auxiliary equipment -- this is the kind of company where skilled technicians build long careers. * $27-$35/hour based on ...

Advastar, Inc

Molding Technician

Kansas City, MO · On-site

$27 - $35/hr

If you know injection molding inside and out -- mold changeovers, setup, auxiliary equipment -- this is the kind of company where skilled technicians build long careers. * $27-$35/hour based on ...

previous pagenext page

Showing results 21-40

All JobsInjection Molding Technician JobsEntry Level Injection Molding Technician Jobs

Entry Level Injection Molding Technician information

See salary details

$13

$24

$34

How much do entry level injection molding technician jobs pay per hour?

As of Aug 16, 2026, the average hourly pay for entry level injection molding technician in the United States is $24.94, according to ZipRecruiter salary data. Most workers in this role earn between $21.15 and $28.37 per hour, depending on experience, location, and employer.

What is the difference between Entry Level Injection Molding Technician vs Injection Molding Operator?

AspectEntry Level Injection Molding TechnicianInjection Molding Operator
CredentialsHigh school diploma or equivalent; on-the-job trainingHigh school diploma or equivalent; basic training
Work EnvironmentManufacturing plant, operating and setting machinesManufacturing floor, monitoring molding machines
Job ResponsibilitiesSetup, troubleshoot, and maintain injection molding machinesOperate machines, monitor quality, and perform basic adjustments

Both roles are entry-level positions in injection molding, often requiring similar certifications and working in manufacturing environments. The Technician typically has broader responsibilities, including machine setup and troubleshooting, while the Operator mainly monitors and manages production. Understanding these differences helps job seekers identify the right role for their skills and career goals.

More about Entry Level Injection Molding Technician jobs

What cities are hiring for Entry Level Injection Molding Technician jobs?

Cities with the most Entry Level Injection Molding Technician job openings:

What are the most commonly searched types of Injection Molding Technician jobs?

The most popular types of Injection Molding Technician jobs are:

What states have the most Entry Level Injection Molding Technician jobs?

States with the most job openings for Entry Level Injection Molding Technician jobs include:

What job categories do people searching Entry Level Injection Molding Technician jobs look for?

The top searched job categories for Entry Level Injection Molding Technician jobs are:

Entry Level Injection Molding Technician jobs near you
Infographic showing various Entry Level Injection Molding Technician job openings in the United States as of August 2026, with employment types broken down into 1% As Needed, 84% Full Time, 11% Part Time, 3% Contract, and 1% Nights. Highlights an 99% Physical, and 1% Remote job distribution, with an average salary of $51,874 per year, or $24.9 per hour.

Injection Molding Technician III- 3rd Shift

Whelen Engineering

NH • On-site

$22.25 - $29.75/hr

Full-time

Re-posted 15 days ago

Whelen Engineering rating

6.4

Company rating: 6.4 out of 10

Based on 26 frontline employees who took The Breakroom Quiz

134th of 157 rated electronics manufacturers

Job description

Injection Molding Technician III- 3rd Shift
Department: Molding (604)
Employment Type: Full Time
Location: Charlestown, NH
Description
Job Title: Mold Processor III - 3rd Shift
Schedule: Sunday- Thursday 11:15PM- 7:45AM
Facility location: Charlestown, NH
Details:
The Injection Molding Technician is responsible for performing mold changes, machine setups, and process adjustments to support high-volume production. This role involves troubleshooting machine issues, optimizing processes, and ensuring consistent part quality. We are seeking candidates at all experience levels - from entry-level (Level 1) with no prior experience to highly skilled technicians (Level 5). We provide structured training and development opportunities to help employees grow through the technician levels
Mold Changes & Setup:
• Perform mold changes according to production schedules and setup sheets.
• Safely remove and install molds using cranes, hoists, and other equipment.
• Ensure proper mold alignment, waterlines, and electrical connections during setup.
• Start up machines and verify correct mold installation and part quality.
Process Adjustments & Optimization:
• Set up, operate, and fine-tune injection molding machines to meet production and quality standards.
• Adjust machine parameters to maintain consistent cycle times, part quality, and process stability.
• Troubleshoot and resolve processing issues (e.g., flash, short shots, burns).
• Develop and document optimized setup sheets using scientific molding principles.
Troubleshooting & Maintenance:
• Diagnose and fix machine issues related to hydraulic, pneumatic, and electrical systems.
• Communicate with maintenance and tool room teams to resolve mold and machine issues.
• Perform basic machine maintenance and ensure proper care of molds and tooling.
Training & Continuous Improvement:
• Participate in and provide feedback for technician training programs.
• Collaborate with engineers and tool design teams to improve mold and part performance.
• Maintain accurate process documentation and setup sheets.
• Train and mentor other technicians and mold changers as experience increases.
Qualifications:
• High school diploma or equivalent.
• No experience required - willing to train the right candidate.
• Strong mechanical aptitude and problem-solving skills.
• Ability to read and interpret blueprints, mold schematics, and process sheets.
• Basic understanding of hydraulic, pneumatic, and electrical systems is a plus.
• Comfortable working in a fast-paced, high-volume production environment.
• Strong attention to detail and commitment to safety.
Applies basic and some intermediate skills to perform functions in the execution of existing procedures, techniques, tools, materials and/or equipment to the position within assigned area
Education:
  • High School diploma and or equivalent preferred but not required.

Physical demands & Abilities:
  • Able to lift up to 80 pounds.
  • Position will require sitting, walking, or standing for at least 40 hours per week.
  • Regularly performs repetitive task.
  • Able to stand for entire shift.
  • Overtime as required.
  • Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
  • Must be able to communicate effectively with co-workers, supervisors, and third parties. This ability to communicate requires the employee to be conversant in English as most of our workforce and the third parties that we encounter only speak English.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
All Employees Shall:
  • Comply with the EH&S Policy and applicable regulatory and company EH&S rules and requirements.
  • Report to supervision conditions or practices that are either unsafe or that may adversely impact the environment, to ensure prompt resolution of potential hazards.
  • Attend scheduled EH&S training program.
  • Actively support the organization's efforts to meet or exceed EH&S goals and plans.
  • Recommend improved EH&S practices.

Must be able to communicate effectively with co-workers, supervisors, and third parties. This ability to communicate requires the employee to be conversant in English as the majority of our workforce and the third parties that we encounter only speak English.
The incumbent is responsible for complying with the policies in Whelen's "Employee Handbook".
This Job Description is to serve as a guide. It is intended to be flexible and will continue to evolve over time with business needs and demands and may be updated periodically and at the Company's discretion. Nothing in this position description changes or is intended to change the employment at-will relationship with the Company. Employment at-will means that an employee or the Company may terminate the employment relationship at any time, for any reason or no reason at all, with or without notice.

What Whelen Engineering employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply