ZipRecruiter

Log In

2

Entry Level Ansys Engineer Jobs (NOW HIRING)

KBR, Inc.

Structural Integrity Engineer

Houston, TX · On-site

KBR is looking for an entry level structural integrity engineer, to help support our Advisory ... ANSYS, ABAQUS, SESAM, SACS, STAAD, etc.). KBR Benefits KBR offers a selection of competitive ...

KBR

Structural Integrity Engineer

Houston, TX · Hybrid

KBR is looking for an entry level structural integrity engineer, to help support our Advisory ... ANSYS, ABAQUS, SESAM, SACS, STAAD, etc.). KBR Benefits KBR offers a selection of competitive ...

AtkinsRéalis

Nuclear Piping Engineer

Oak Ridge, TN · On-site

$80K - $90K/yr

This is an entry-level position and is based out of Oak Ridge, TN. Your Role * Assist in designing ... STRUDL, ANSYS). * Experience developing technical writings and reports. * PROFESSIONAL ...

SNC-Lavalin

Nuclear Piping Engineer

Oak Ridge, TN · On-site

$80K - $90K/yr

This is an entry-level position and is based out of Oak Ridge, TN. Your Role * Assist in designing ... STRUDL, ANSYS). * Experience developing technical writings and reports. * PROFESSIONAL ...

RFA Engineering

Vehicle Dynamics Engineer

Waterloo, IA · On-site

Ansys Motion, GT-Suite - GT-3DMBD Vehicle Dynamics) is preferred * Ideal candidate will have 1-3 ... entry level being considered. Visa sponsorship is NOT available for this position. About RFA ...

WSP

Intermediate Structural Engineer

Meridian, ID · On-site

Perform routine engineering functions and provide entry-level technical assistance on various ... ANSYS, STADD, HEC-RAS, HEC-HMS). * Proven track record of upholding workplace safety and ability to ...

WSP

Intermediate Structural Engineer

Meridian, ID · On-site

Perform routine engineering functions and provide entry-level technical assistance on various ... ANSYS, STADD, HEC-RAS, HEC-HMS). * Proven track record of upholding workplace safety and ability to ...

BWX Technologies

Mechanical Engineer

Euclid, OH

$62K - $97K/yr

Bachelor of Science degree in Mechanical Engineering. * Entry level to Senior candidates will be ... Experience with finite element analysis (ANSYS). * Experience with Pro/E Creo CAD software. #LI-CS1 ...

BWX Technologies

Mechanical Engineer

Euclid, OH

$62K - $97K/yr

Bachelor of Science degree in Mechanical Engineering. * Entry level to Senior candidates will be ... Experience with finite element analysis (ANSYS). * Experience with Pro/E Creo CAD software. #LI-CS1 ...

WSP

Early Career Civil Engineer

Kennesaw, GA · On-site

Perform routine engineering functions and provide entry-level technical assistance on various ... ANSYS, STADD, HEC-RAS, HEC-HMS). * Prior internship related to the degree of study and the specific ...

Tait

Associate Mechanical Engineer

Lititz, PA · On-site

Familiarity with engineering analysis tools (e.g., FEA software such as ANSYS or equivalent) * Strong problem-solving skills and attention to detail * Ability to manage multiple priorities in a fast ...

WSP

Early Career Geotechnical Engineer

Birmingham, AL · On-site

Perform routine geotechnical engineering functions and provide entry-level technical assistance on ... ANSYS, STADD, HEC-RAS, HEC-HMS). * Proven track record of upholding workplace safety and ability to ...

WSP

Early Career Geotechnical Engineer

Birmingham, AL

Perform routine geotechnical engineering functions and provide entry-level technical assistance on ... ANSYS, STADD, HEC-RAS, HEC-HMS). * Proven track record of upholding workplace safety and ability to ...

next page

Showing results 1-20

All JobsAnsys Engineer JobsEntry Level Ansys Engineer Jobs

Entry Level Ansys Engineer information

See salary details

$40.5K

$73.5K

$121K

How much do entry level ansys engineer jobs pay per year?

As of Jul 10, 2026, the average yearly pay for entry level ansys engineer in the United States is $73,528.00, according to ZipRecruiter salary data. Most workers in this role earn between $52,000.00 and $88,500.00 per year, depending on experience, location, and employer.

What are the key skills and qualifications needed to thrive as an Entry Level Ansys Engineer, and why are they important?

To thrive as an Entry Level Ansys Engineer, you need a solid background in mechanical or related engineering disciplines, with proficiency in finite element analysis (FEA) and a relevant engineering degree. Familiarity with Ansys simulation software, CAD tools, and basic programming or scripting skills are typically required. Strong problem-solving abilities, attention to detail, and effective communication help you interpret results and collaborate with team members. These skills ensure accurate simulations, efficient workflow, and valuable engineering insights to support product development.

What is an Entry Level Ansys Engineer?

An Entry Level Ansys Engineer is a professional who uses Ansys software to perform simulations and analyses, typically in fields like mechanical, aerospace, or civil engineering. They are responsible for assisting in the design and validation of products by conducting computational simulations such as finite element analysis (FEA) and computational fluid dynamics (CFD). Entry level engineers often work under the supervision of senior engineers, learning to interpret simulation results, prepare technical reports, and support product development processes. This role is ideal for recent graduates with a background in engineering and a strong interest in simulation software.

What is the difference between Entry Level Ansys Engineer vs Mechanical Design Engineer?

AspectEntry Level Ansys EngineerMechanical Design Engineer
Required CredentialsBachelor's in Mechanical, Aerospace, or related engineering; basic knowledge of FEA softwareBachelor's in Mechanical or Civil Engineering; CAD and design software skills
Work EnvironmentEngineering firms, manufacturing, aerospace; focus on simulation and analysisProduct development, manufacturing, automotive; focus on designing mechanical components
Employer & Industry UsageUsed in industries requiring simulation for stress, thermal, fluid analysisUsed in industries designing mechanical parts and assemblies

The Entry Level Ansys Engineer primarily focuses on performing simulations using Ansys software to analyze mechanical components, while a Mechanical Design Engineer concentrates on creating and developing mechanical designs and drawings. Both roles require a mechanical engineering background, but their daily tasks and focus areas differ significantly, with the Ansys Engineer emphasizing analysis and testing, and the Design Engineer emphasizing creation and development.

What types of projects or tasks can an Entry Level Ansys Engineer expect to work on during their first year?

As an Entry Level Ansys Engineer, you will typically support more experienced engineers by setting up, running, and analyzing simulation models using Ansys software. Common tasks include preparing CAD models for simulation, running finite element analysis (FEA) or computational fluid dynamics (CFD) simulations, and documenting results. You may also be asked to assist in validating simulation results against experimental data and troubleshooting simulation setup issues. This collaborative environment provides opportunities to learn industry best practices, gain exposure to various engineering problems, and gradually take on more complex assignments as your skills develop.
More about Entry Level Ansys Engineer jobs
What cities are hiring for Entry Level Ansys Engineer jobs? Cities with the most Entry Level Ansys Engineer job openings:
What are the most commonly searched types of Ansys Engineer jobs? The most popular types of Ansys Engineer jobs are:
What states have the most Entry Level Ansys Engineer jobs? States with the most job openings for Entry Level Ansys Engineer jobs include:
What job categories do people searching Entry Level Ansys Engineer jobs look for? The top searched job categories for Entry Level Ansys Engineer jobs are:
Entry Level Ansys Engineer jobs near you
Thermal / Hydraulic Design Engineer

Thermal / Hydraulic Design Engineer

BWX Technologies

Barberton, OH • On-site

Full-time

Re-posted 4 days ago

BWX Technologies rating

8.1

Company rating: 8.1 out of 10

Based on 29 frontline employees who took The Breakroom Quiz

Job description

At BWX Technologies, Inc. (NYSE: BWXT), we are People Strong, Innovation Driven. Headquartered in Lynchburg, Va., BWXT provides safe and effective nuclear solutions for national security, clean energy, environmental remediation, nuclear medicine and space exploration. With approximately 6,650 employees, BWXT has 12 major operating sites in the U.S. and Canada. We are the sole manufacturer of naval nuclear reactors for U.S. submarines and aircraft carriers. Our company supplies precision manufactured components, services and fuel for the commercial nuclear power industry across four continents. Our joint ventures provide environmental remediation and nuclear operations management at more than a dozen U.S. Department of Energy and NASA facilities. BWXT's technology is driving advances in medical radioisotope production in North America and microreactors for various defense and space applications. Follow us on Twitter at @BWXTech and learn more at www.bwxt.com.
Thermal / Hydraulic Design Engineer - BWX Technologies, Inc. - Barberton, OH
BWXT Nuclear Operations Group, Inc. is seeking a Mechanical, Aerospace, Nuclear, or Chemical Engineer to join the Design Engineering team in the Thermal/Hydraulic Design group. BWXT provides safe and effective nuclear solutions for national security, clean energy, environmental remediation, nuclear medicine, and space exploration. We are the sole manufacturer of naval nuclear reactors for U.S. submarines and aircraft carriers. BWXT has 12 major operating sites in the U.S. and Canada.
Responsibilities Include:
  • Perform thermal-hydraulic design evaluations including: steady-state and transient analysis of recirculating steam generators, two-phase flow and heat transfer analysis, incompressible/compressible flow network analysis, heat exchanger design and optimization, steam drum design, multi-phase separator design, and computational fluid dynamics (CFD) modeling using STAR CCM and ANSYS FLUENT.
  • Perform maintenance and development of in-house fluid dynamic and heat transfer analysis software in FORTRAN, Visual Basic, VBA, PYTHON, C++, etc.
  • Interface with steam/water separation equipment through support of development activities including testing and analysis.
  • Work with large data sets to infer trends and improve analysis techniques.
  • Work with other design and manufacturing engineers in development of design of components to be manufactured by BWXT Nuclear Operations Group.
  • Review fabrication drawings to ensure they satisfy functional design requirements.
  • Communicate information and status orally and in written form. Document analysis by compiling a technical report that documents analysis, results, and conclusions and compile a calculation file detailing the analysis.
  • Develop summary presentations on analysis results applicable to a wide variety of intended audiences.
  • The selected candidate will work in a team comprising of thermal/hydraulic, structural, manufacturing, welding, project and QA engineers to evaluate and optimize pressure vessel designs.
  • The candidate will also be working closely with manufacturing and project engineers to resolve fabrication related issues.
  • Opportunity for a variety of mechanical engineering analysis assisting other groups within Design Engineering, including structural design/stress analysis such as: linear elastic sizing, fatigue, elastic-plastic, fracture mechanics, shock and vibration, thermal/mechanical, and Finite Element Analysis (FEA) using ABAQUS or ANSYS.

Qualifications / Requirements:
  • Candidates must have a bachelor's degree in a Mechanical Engineering, or similar. A bachelor's degree in Aerospace, Nuclear, or Chemical Engineering will also be considered.
  • Knowledge of single-and two-phase fluid flow and heat transfer analysis tools and methods, including computational fluid dynamics (CFD).
  • Candidates must be able to demonstrate superior written, oral, and interpersonal communication skills. Knowledge of single-and two-phase fluid flow and heat transfer analysis tools and methods, including computational fluid dynamics (CFD).
  • Entry level role, less than 1 years of experience required.
  • Candidate must be able to obtain and retain a DOE clearance.

Applicants selected will be subject to a Federal background investigation and must meet eligibility requirements for access to classified information or matter. Position requires U.S. Citizenship and ability to obtain and maintain a Department of Energy (DOE) security clearance which involves an extensive criminal and financial background investigation and previous employment reference verifications.
BWXT supports diversity and is committed to the concept of Equal Employment Opportunity. We have established procedures to ensure that all personnel actions such as recruitment, compensation, career development, benefits, company-sponsored training and social recreational programs are administered without regard to race, color religion, gender, national origin, citizenship, age, disability or veteran status.

What BWX Technologies employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply