ZipRecruiter

Log In

1

Electrical Instrumentation Controls Technician Jobs in Raleigh, NC

IEG USA

Lead Controls Technician Raleigh

Raleigh, NC · On-site

$25 - $35/hr

Lead Controls Electrical Technician / Journeyman Full-Time | $27$33 per hour | Multiple Locations (In-Person) Job Summary We are seeking an experienced and detailoriented Lead Controls Electrical ...

IEG USA

Lead Controls Technician Raleigh

Raleigh, NC

$25 - $35/hr

Lead Controls Electrical Technician / Journeyman Full-Time | $27-$33 per hour | Multiple Locations (In-Person) Job Summary We are seeking an experienced and detailoriented Lead Controls Electrical ...

Brady Services

Controls Technician

Morrisville, NC · On-site

$28 - $37/hr

Are you a Controls Technician searching for new experiences? As a leading Trane ® independent ... electrical shock and vibration. Occasional exposure to toxic or caustic chemicals, extreme cold ...

Brady Services

Controls Technician

Morrisville, NC · On-site

$28 - $37/hr

Are you a Controls Technician searching for new experiences? As a leading Trane ® independent ... electrical shock and vibration. Occasional exposure to toxic or caustic chemicals, extreme cold ...

previous page

Showing results 41-60

All JobsElectrical Instrumentation Controls Technician JobsElectrical Instrumentation Controls Technician Jobs in Raleigh, NC

Electrical Instrumentation Controls Technician information

See Raleigh, NC salary details

$20

$34

$49

How much do electrical instrumentation controls technician jobs pay per hour?

As of Sep 2, 2026, the average hourly pay for electrical instrumentation controls technician in Raleigh, NC is $34.43, according to ZipRecruiter salary data. Most workers in this role earn between $28.03 and $39.71 per hour, depending on experience, location, and employer.

What is the difference between Electrical Instrumentation Controls Technician vs Electrical Maintenance Technician?

AspectElectrical Instrumentation Controls TechnicianElectrical Maintenance Technician
CertificationsTypically requires certifications in instrumentation, control systems, and electrical troubleshootingOften holds electrical trade certifications or licenses, focusing on electrical systems maintenance
Work EnvironmentWorks mainly in industrial plants, manufacturing facilities, and process industries with control systemsWorks in various settings including commercial, industrial, and residential electrical systems
Job FocusSpecializes in installing, maintaining, and troubleshooting control systems and instrumentationFocuses on electrical system repairs, wiring, and general electrical maintenance

Electrical Instrumentation Controls Technicians and Electrical Maintenance Technicians share some electrical skills but differ mainly in their focus. The instrumentation technician specializes in control systems and instrumentation, while the maintenance technician handles broader electrical repairs. Both roles are essential in industrial settings, but their certifications, work environments, and job responsibilities vary.

What does an electrical instrumentation controls technician do?

An electrical instrumentation controls technician installs, maintains, and repairs electrical and control systems used in industrial processes. They work with sensors, controllers, and automation equipment, often using tools like multimeters and PLCs, and typically require technical certifications. Their role ensures the safe and efficient operation of equipment in manufacturing, power plants, or other industrial settings.

Where do electrical instrumentation controls technicians make the most money?

Electrical instrumentation controls technicians tend to earn higher salaries in regions with a strong industrial or manufacturing presence, such as areas with large chemical, oil and gas, or power generation facilities. Factors like experience, certifications, and specialized skills with control systems and instrumentation can also influence earning potential, especially in high-demand sectors or facilities with complex automation needs.

What are popular job titles related to Electrical Instrumentation Controls Technician jobs in Raleigh, NC?

For Electrical Instrumentation Controls Technician jobs in Raleigh, NC, the most frequently searched job titles are:

What job categories do people searching Electrical Instrumentation Controls Technician jobs in Raleigh, NC look for?

The top searched job categories for Electrical Instrumentation Controls Technician jobs in Raleigh, NC are:

What cities near Raleigh, NC are hiring for Electrical Instrumentation Controls Technician jobs?

Cities near Raleigh, NC with the most Electrical Instrumentation Controls Technician job openings:

Electrical Instrumentation Controls Technician jobs near you
Infographic showing various Electrical Instrumentation Controls Technician job openings in Raleigh, NC as of August 2026, with employment types broken down into 1% As Needed, 81% Full Time, 14% Part Time, 3% Contract, and 1% Nights. Highlights an 97% Physical, 1% Hybrid, and 2% Remote job distribution, with an average salary of $71,612 per year, or $34.4 per hour.

Maintenance Instrumentation & Electrical Tech

Endo International

Raleigh, NC • On-site

$26 - $33.50/hr

Full-time

Re-posted 19 days ago

Job description

Why Us?
At Par Health, we believe great healthcare is built on getting the essentials right. We're looking for passionate, talented individuals who share our commitment to improving lives. With 4,000+ team members worldwide, we lead with pride and purpose-prioritizing quality and safety while fostering a culture of continuous improvement, accountability, and teamwork. Elevating the Essentials isn't just our tagline, it's the higher standard we live by every day.
Job Description Summary
The Maintenance I/E Technician performs a variety of electrical and instrumentation duties involving the maintenance of plant facilities. S/he will be responsible for calibrating, installing, maintaining, repairing, and inspecting plant monitoring devices on a wide variety of complex digital, analog, programmable, and other auxiliary equipment.
Job Description
ESSENTIAL FUNCTIONS:
  • Installs, troubleshoots, repairs, and calibrates low voltage AC/DC electrical and instrumentation controls as well as 3-phase 480-volt power circuits.
  • Interfaces with OEM's and vendors as necessary. Requisitions equipment as needed.
  • Accurately completes all work performed according to standard operating procedures (SOPs) and work instructions, including proper documentation. Completes work orders using CMMS (Maximo) system.
  • Performs repairs and modifications as directed by maintenance supervisor, or other plant management.
  • Supports and participates in training programs.
  • Keeps the maintenance supervisor abreast of job status.
  • Supports site safety programs.
  • Supports/leads failure analysis process by discussing the causes of equipment failure with the maintenance supervisor, or the maintenance engineer.
  • Accurately completes all required paperwork, including but not limited to timesheets, "found as-left" forms, calibration reports (ICIR), and PM checklists.
  • Responsible for good housekeeping in the shop and at the job site.
  • Must be able to wear the required Personal Protective Equipment (PPE), full face respirator, hard hats, safety glasses, ear plugs, goggles, boots, steel -toe shoes, gloves, chemical resistant aprons and suits, and other personal protective equipment deemed necessary by EHS, leadership team, corporate, or safety guidelines for each job task.

DEPARTMENT SPECIFIC/NON-ESSENTIAL FUNCTIONS:
  • Other duties as assigned with or without accommodations.
  • Supports the PM/PdM program and calibration program by ensuring a high quality of workmanship.
  • Accurately enters all required information on work orders.
  • Assists the maintenance supervisor and maintenance engineers, or others as needed with equipment installation, maintenance, repair techniques, and with identifying opportunities for improving equipment reliability. Shows emphasis on the design, installation, commissioning, maintenance, and use of mechanical equipment throughout the facility.
  • Recognizes problem independently and troubleshoots malfunctioning equipment without direct supervision.

MINIMUM REQUIREMENTS:
Education:
High School diploma, GED, or equivalent.
Associate or Technical degree in a mechanical field preferred.
Experience:
1 - 3 years I/E experience in a pharmaceutical manufacturing operation.
Preferred Skills/Qualifications:
Skills/Competencies:
Other Skills:
Work as an industrial I/E mechanic, PLC skills.
Must have a working knowledge of the tools and test equipment used for testing, calibrating, repairing, and maintain production instruments and controls.
Must be able to read and comprehend blueprints, electrical schematics, and engineering specifications.
Must be able to perform shop math.
Must be able to understand electricity, respect, and follow safety guidelines.
Must be able to read and follow written instruction.
Should be familiar with National Electrical Code, NFPA 70E, calibration standards, and cGMP.
Experience working with voltages up to 480.
Experience with CMMS, such as MP2 or Maximo.
Learning on the Fly, Problem Solving, Interpersonal Savvy
RELATIONSHIP WITH OTHERS/ SCOPE:
Reports to Maintenance Supervisor.
  • Utilizes a variety of test instruments, hand tools, supplies, and other shop equipment on a daily basis. On occasion, it may be required to take tools to the work area in the plant.
  • No direct responsibility exists for the works of others, although adherence to the team concept requires mutual assistance in some jobs.
  • Indirectly responsible for amount and quality of product through the maintenance and repair of production equipment. A thorough understanding of cGMP is critical.
  • Significant responsibility for the safety of others, improperly repaired equipment could possibly result in safety hazards to plant personnel.
  • Understands the misuse of processing equipment could result in serious injuries to self and others due to the potentially dangerous nature of the equipment and the chemicals being processed.

WORKING CONDITIONS:
  • I/E Technicians are required to work in all areas of the plant site, both inside and outside. There may be exposure to warm areas, dirt, oil, grease, chemicals/chemical fumes, and noise.
  • Injuries could result from spills or leaks or corrosive, flammable, and toxic material, all which are normally handled in the plant.
  • Dangers, such as sharp edges, pinch points, chemical and temperature burns, lifting, and electricity are often present. Personal protective equipment required to be worn often.
  • Routinely lifts and carries objects of 50 pounds or less in weight. Must be able to go up and down several flights of steps on occasion. May be required to exert effort to pull control valves, loosen bolts, or move controls and instrumentations.
  • May be required to wear a full-face respirator contingent upon required job duties.

DISCLAIMER:
The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of employees assigned to this position.
EEO Statement:
We comply with all applicable federal, state, and local laws prohibiting discrimination and harassment, and provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or genetic information, or any other classification protected by federal, state or local law. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Apply