1

Electrical Engineer Two Jobs in California (NOW HIRING)

Electrical Engineer II

Petaluma, CA · On-site

$82 - $116.03/hr

Worker Type Regular Electrical Engineer II designs, develops, modifies and evaluates electronic parts, components or integrated circuitry for electronic equipment, or other hardware systems and/or ...

Electrical Engineer II

Petaluma, CA · On-site

$82K - $125K/yr

Worker Type Regular Summary The Electrical Engineer II designs, develops, modifies and evaluates electronic parts, components or integrated circuitry for electronic equipment, or other hardware ...

Electrical Engineer II

Petaluma, CA · On-site

$82K - $125K/yr

Worker Type Regular Summary The Electrical Engineer II designs, develops, modifies and evaluates electronic parts, components or integrated circuitry for electronic equipment, or other hardware ...

Electrical Engineer II

El Segundo, CA · On-site

$100K - $121K/yr

We are seeking an Electrical Engineer II to assist with flight engine electronics, instrumentation, harnessing, and control hardware. In this role, you will design, build, test, and troubleshoot ...

We are seeking an Electrical Engineer II to assist with flight engine electronics, instrumentation, harnessing, and control hardware. In this role, you will design, build, test, and troubleshoot ...

We are seeking a talented and self-motivated Electrical Engineer II to join our engineering team. In this role, you will be responsible for the electrical design of FPGA, board, and system-level ...

Bachelor's degree in Electrical Engineering or a related engineering discipline. * 2-5 years of experience in electrical system design, development, manufacturing, or sustaining engineering.

Electrical Engineer II

Garden Grove, CA · On-site

$120K - $150K/yr

We are seeking a talented and self-motivated Electrical Engineer II to join our engineering team. In this role, you will be responsible for the electrical design of FPGA, board, and system-level ...

We are seeking an Electrical Engineer II to assist with flight engine electronics, instrumentation, harnessing, and control hardware. In this role, you will design, build, test, and troubleshoot ...

Job Summary We are seeking a talented and self-motivated Electrical Engineer II to join our engineering team. In this role, you will be responsible for the electrical design of FPGA, board, and ...

We are seeking a talented and self-motivated Electrical Engineer II to join our engineering team. In this role, you will be responsible for the electrical design of FPGA, board, and system-level ...

Bachelor of Science degree in electrical engineering, and 2 to 4 years' experience in electrical systems design; or equivalent combination of education and experience. * Engineering in Training (EIT ...

Electrical Engineer II

San Jose, CA · On-site

$49 - $63/hr

Bachelor of Science degree in electrical engineering, and 2 to 4 years' experience in electrical systems design; or equivalent combination of education and experience. * Engineering in Training (EIT ...

Bachelor of Science degree in electrical engineering, and 2 to 4 years' experience in electrical systems design; or equivalent combination of education and experience. * Engineering in Training (EIT ...

Electrical Engineer II

Oakland, CA · On-site

$120 - $180/hr

The role Join our electrical engineering team to design and develop the electronics that make our ... (2) the optical terminal electronics including motor control systems, fine steering control ...

Showing results 41-60

Electrical Engineer Two information

What is the difference between Electrical Engineer Two vs Electrical Engineer Three?

AspectElectrical Engineer TwoElectrical Engineer Three
Required CredentialsBachelor's degree in Electrical Engineering; some roles may require PE licenseBachelor's degree; often preferred to have PE license or advanced certifications
Work EnvironmentDesign, testing, and troubleshooting in labs or on-site projectsMore complex project involvement, leadership in small teams, and oversight
Employer & Industry UsageUtilities, manufacturing, consulting firmsSimilar industries, with increased responsibilities
Common Search & ComparisonElectrical Engineer TwoElectrical Engineer Three

Electrical Engineer Two typically handles design and testing tasks with foundational responsibilities, while Electrical Engineer Three takes on more complex projects and may lead small teams. The progression reflects increased experience, certifications, and project scope within the same industry.

What cities in California are hiring for Electrical Engineer Two jobs?

Cities in California with the most Electrical Engineer Two job openings:

Electrical Engineer II

InvestedintheMission

Petaluma, CA • On-site

$82 - $116.03/hr

Other

Medical, Dental, Vision, Retirement

Posted 5 days ago


Job description

Worker Type

Regular

Job Description

Electrical Engineer II designs, develops, modifies and evaluates electronic parts, components or integrated circuitry for electronic equipment, or other hardware systems and/or electrical engineering applications. In this role, one selects components and equipment based on analysis of specifications and reliability as well as determines design approaches & parameters. Conducts general engineering and design of electronic systems on small unmanned aircraft vehicles with cross-functional teams. May also review vendor capability to support product development.

Position Responsibilities
  • Performs simulation and detailed design for digital and analog circuits
  • Drives system integration, assembly procedures, and test procedures
  • Documents designs with engineering drawings and written descriptions
  • Trouble-shoots complex systems from a hardware and software perspective
  • Designs, builds, and tests prototypes expediently and efficiently. Works with avionics, embedded systems, and RF links
  • Writes software to support the integration of sensors and embedded processors
  • Designs and implements circuit boards. This includes architecture, component selection, schematic capture, board layout, board bring-up, and documentation
  • Performs electronic engineering support activities on R&D projects
  • Performs design & analysis tasks and writes fabrication & test procedures
  • Works on problems of moderate scope where analysis of situations or data requires a review of a variety of factors
  • Other duties as assigned
Basic Qualifications (Required Skills & Experience)
  • B.S. Degree in Electrical Engineering or related discipline is required or equivalent combination of education, training, and experience
  • Minimum of 2 - 5 years of relevant experience
  • Experienced using Altium Designer for schematic capture and PCB layout
  • Experienced in one or more areas: Radio Frequency (RF), embedded control, FPGA
  • Experienced with power electronics, including motors and lithium batteries
  • Demonstrated ability to troubleshoot complex systems
  • Demonstrated familiarity with common industry protocols (LVDS, I2C, HDMI, UART, SPI, CAN, USB)
  • Strong knowledge of Engineering fundamentals, mathematics, physics & material properties
  • Familiarity with Small UAV subsystems and associated software
  • Proficient with office software, computer-based productivity tools and other software tools in one's area of expertise
  • Some travel may be required in support of flight test operations (up to 30%)
  • Must have a clean driving record
Other Qualifications & Desired Competencies
  • Advanced degree is preferred
  • Flight test or R/C (Remote Control) experience preferred
  • Demonstrated ability of hands-on experience with tools is preferred
  • Consistently complies with company's policies and procedures
  • Follows standard practices and procedures when analyzing situations or data from which answers can be readily obtained. Completes assigned tasks within schedule and budget
  • Skilled at building productive internal/external working relationships and offers guidance to Associate Engineers. Shares ideas and experiences with others, solicits feedback and asks relevant questions
  • Develops professional expertise and applies company policies & procedures to resolve a variety of issues
  • Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties
  • Displays strong initiative and drive to accomplish goals and meet company objectives
  • Takes ownership and responsibility for current and past work products
  • Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company
  • Has effective problem-solving, analytical, interpersonal and communication skills
  • Team Player - Focuses on teamwork, collaboration and puts the success of the team above one's own interests
Physical Demands
  • Ability to work in an office and manufacturing environment (Constant)
  • Required to sit and stand for long periods; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent)
Clearance Level

No Clearance

The salary range for this role is:

$82,000 - $116,025

AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate’s work experience, education/training, and key skills.

ITAR Requirement

This position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment’s determination that it will be able to obtain an export license in a time frame consistent with AeroVironment’s business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements.

Benefits

Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: http://www.avinc.com/myavbenefits

We also encourage you to review our company website at http://www.avinc.com to learn more about us.

Principals only need apply. NO agencies please.

About AV:

AV isn’t for everyone. We hire the curious, the relentless, the mission-obsessed. The best of the best.

We don’t just build defense technology-we redefine what’s possible. As the premier autonomous systems company in the U.S., AV delivers breakthrough capabilities across air, land, sea, space, and cyber. From AI-powered drones and loitering munitions to integrated autonomy and space resilience, our technologies shape the future of warfare and protect those who serve.

Founded by legendary innovator Dr. Paul MacCready, AV has spent over 50 years pushing the boundaries of what unmanned systems can do. Our heritage includes seven platforms in the Smithsonian- but we’re not building history, we’re building what’s next.

If you're ready to build technology that matters—with speed, scale, and purpose—there’s no better place to do it than AV.

We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status.

ITAR

U.S. Citizenship required

#J-18808-Ljbffr