ZipRecruiter

Log In

1

Distributed Control System Jobs in Texas (NOW HIRING)

ORAU

Control System Engineer

Houston, TX

Perform a broad range of I&C design activities, including design definition, control systems architecture and development, digital systems, Programmable Logic Controller (PLC), Distributed Control ...

RoviSys

PR · On-site

$60K - $95K/yr

Define and implement Delta-V distributed control system (DCS) configurations * Testing and on-site commissioning and qualification of control systems * Lead teams of engineers and technicians to ...

RoviSys

PR · On-site

$75K - $100K/yr

Define and implement distributed control system (DCS) configurations * Designs control systems' network architectures and control strategies. * Testing and on-site commissioning and qualification of ...

Scout Talent Group

Control System Engineer

Dallas, TX · On-site

$90K - $100K/yr

Control System Engineer Point of contact: Angela Gray Address: 10925 Miller Rd., Dallas, TX, 75238 ... Familiarity with low-voltage distribution systems: single-phase, split-phase, and three-phase ...

Scout Talent Group

Control System Engineer

Dallas, TX · On-site

$90K - $100K/yr

Control System Engineer Point of contact: Angela Gray Address: 10925 Miller Rd., Dallas, TX, 75238 ... Familiarity with low-voltage distribution systems: single-phase, split-phase, and three-phase ...

NextDecade

Engineer, Control Systems

Brownsville, TX · On-site

Distributed Control System (DCS), equipment control systems (e.g., PID controllers, Sequential logic control, Opticomp, turbine controls, local control panels, Programmable Logic Controllers (PLCs ...

NextDecade

Engineer, Control Systems

Brownsville, TX · On-site

Distributed Control System (DCS), equipment control systems (e.g., PID controllers, Sequential logic control, Opticomp, turbine controls, local control panels, Programmable Logic Controllers (PLCs ...

Abb Holdings Inc

Senior Project Engineer

Houston, TX · On-site

$94K - $123K/yr

Execute cost effective Distributed Control System project deliverables on time in accordance with specifications, standards, and safety requirements. Design, test and commission Automation Enclosures ...

ABB

Senior Project Engineer

Houston, TX · On-site

$94K - $123K/yr

Execute cost effective Distributed Control System project deliverables on time in accordance with specifications, standards, and safety requirements. Design, test and commission Automation Enclosures ...

NextDecade

Engineer, Control Systems

Brownsville, TX · On-site

Distributed Control System (DCS), equipment control systems (e.g., PID controllers, Sequential logic control, Opticomp, turbine controls, local control panels, Programmable Logic Controllers (PLCs ...

ORAU

Control System Principal Engineer

Houston, TX

Perform a broad range of I&C design activities, including design definition, control systems architecture and development, digital systems, Programmable Logic Controller (PLC), Distributed Control ...

ABB

Senior Project Engineer

Houston, TX

$87K - $114K/yr

Execute cost effective Distributed Control System project deliverables on time in accordance with specifications, standards, and safety requirements. Design, test and commission Automation Enclosures ...

WestRock

Staff Eng, Process Control

Evadale, TX · On-site

In this role, you will serve as a project technical lead in the development, installation, integration, implementation, maintenance and administration of Evadale's distributed process control system ...

Westrock

Staff Eng, Process Control

Evadale, TX · On-site

In this role, you will serve as a project technical lead in the development, installation, integration, implementation, maintenance and administration of Evadale's distributed process control system ...

Stepan Company

Board Operator

Pasadena, TX · On-site

Operate and monitor plant processes using the Honeywell Distributed Control System (DCS) * Monitor process conditions and make operating adjustments to maintain safe, efficient, and compliant ...

next page

Showing results 1-20

All JobsDistributed Control System JobsDistributed Control System Jobs in Texas

Distributed Control System information

See Texas salary details

$56.8K

$101.3K

$163.5K

How much do distributed control system jobs pay per year?

As of Jul 10, 2026, the average yearly pay for distributed control system in Texas is $101,342.00, according to ZipRecruiter salary data. Most workers in this role earn between $78,300.00 and $117,900.00 per year, depending on experience, location, and employer.

What does a DCS operator do?

A DCS (Distributed Control System) operator monitors and controls industrial processes using specialized software and hardware. They ensure system stability, respond to alarms, and adjust controls to maintain safe and efficient operation, often working in manufacturing, power plants, or chemical facilities. Proficiency in control systems, attention to detail, and adherence to safety protocols are essential for this role.

What are the key skills and qualifications needed to thrive as a Distributed Control System (DCS) Engineer, and why are they important?

To thrive as a Distributed Control System (DCS) Engineer, you need a solid background in process control, instrumentation, and electrical engineering, typically with a relevant engineering degree. Familiarity with DCS platforms (such as Emerson DeltaV, Siemens PCS 7, or Honeywell Experion), PLC programming, and relevant industry certifications is essential. Strong problem-solving skills, attention to detail, and effective communication are crucial soft skills for this role. These skills ensure safe, efficient, and reliable automated process operations in complex industrial environments.

What is a Distributed Control System (DCS)?

A Distributed Control System (DCS) is an automated control system used in industrial processes, where control functions are distributed throughout the system rather than being centralized. DCS uses a network of controllers, sensors, and operator interfaces to monitor and manage complex processes such as manufacturing, chemical production, and power generation. This setup improves reliability, scalability, and process efficiency by allowing real-time data collection and decentralized decision-making. DCS systems are commonly used in industries requiring high levels of automation and process control.

What engineer makes $500,000 a year?

Highly experienced engineers in specialized fields such as control systems, software engineering, or automation engineering can earn $500,000 or more annually, especially in senior or executive roles. These positions often require advanced skills, certifications, and extensive industry experience, typically within large corporations or high-demand sectors like energy, aerospace, or technology.

What are some common challenges faced by Distributed Control System (DCS) engineers when integrating new equipment into existing systems?

DCS engineers often encounter challenges such as compatibility issues between legacy systems and new hardware, ensuring minimal downtime during integration, and maintaining stringent safety standards. Coordinating with multiple stakeholders—including process engineers, vendors, and IT teams—is essential to align on technical requirements and testing procedures. Additionally, engineers must thoroughly validate system performance and troubleshoot unexpected behaviors to ensure seamless operation and compliance with industry regulations.

What does a distributed control system do?

A distributed control system (DCS) is used to monitor and control industrial processes by distributing control functions across multiple controllers connected via a communication network. It enables real-time data collection, process automation, and system reliability in environments such as manufacturing, power plants, and chemical processing. DCS operators and engineers typically work with specialized software and hardware to ensure efficient and safe operations.

What is the difference between Distributed Control System vs PLC Programmer?

AspectDistributed Control System (DCS)PLC Programmer
CredentialsEngineering degree, industry certificationsTechnical diploma or degree, PLC programming certifications
Work EnvironmentIndustrial plants, process industriesManufacturing facilities, automation projects
UsageControl of complex, large-scale processesProgramming and troubleshooting PLCs for automation

While both roles involve industrial automation, a Distributed Control System (DCS) manages large-scale process control in industries like oil, gas, and chemicals, requiring system integration skills. A PLC Programmer focuses on programming and maintaining programmable logic controllers used in various manufacturing settings. Understanding their differences helps employers and professionals choose the right expertise for specific automation needs.

How much do control engineers get paid?

Control engineers typically earn a median annual salary between $70,000 and $110,000, depending on experience, location, and industry. Salaries can increase with specialized skills in automation, PLC programming, and familiarity with control system software like SCADA or DCS platforms.
What are popular job titles related to Distributed Control System jobs in Texas? For Distributed Control System jobs in Texas, the most frequently searched job titles are:
What job categories do people searching Distributed Control System jobs in Texas look for? The top searched job categories for Distributed Control System jobs in Texas are:
Distributed Control System jobs near you
Infographic showing various Distributed Control System job openings in Texas as of July 2026, with employment types broken down into 1% As Needed, 78% Full Time, 17% Part Time, 1% Temporary, 2% Contract, and 1% Nights. Highlights an 96% Physical, 1% Hybrid, and 3% Remote job distribution, with an average salary of $101,342 per year, or $48.7 per hour.
Distributed Control Systems Programmer

Distributed Control Systems Programmer

Wood Plc

Deer Park, TX • On-site

Other

Re-posted 4 days ago

Job description

Overview / Responsibilities

Wood is currently recruiting for a Distributed Control Systems (DCS) Programmer to support the petrochemical industry. Local candidates to the Deer Park, TX area preferred please (there is no relocation assistance or per diem offered).

Authorization to work lawfully in the US without sponsorship from Wood is required

Job Description / Duties / Responsibilities:

This role provides Process Automation expertise and support to include but not limited to DeltaV configuration, testing, startup and commissioning activities to the Capital Project Engineering Group. The DCS (Distributed Control Systems) Programmer Engineer is a key point of information and guidance for the Basic Process Control System (BPCS) functionality at the site. This role will report to the site Instrument, Electrical, & Controls Group Lead.

  • Experience in DeltaV programming - Process Control Systems support and networking technologies such as BPCS systems, SIS systems, batch software, HMI software, and PC networking/ communications technologies in an operating plant in chemical or refining industries
  • Demonstrated ability to learn new chemical processes
  • Demonstrated ability to work effectively in a team environment
  • Writing and verbal communication skills to promote ideas, train operators and engineers
  • Provide installation and support for all plant control systems and maintenance team objectives
  • Understand Alarm Rationalization and life cycle management
  • Provide engineering support for multiple small capital projects simultaneously including scope definition, engineering design, cost estimation, software configuration, bid package preparation, MOC preparation, oversee contractors, manage shutdown/commissioning, startup phases and train operators
  • Provide instrumentation and control systems support for large and small capital projects
  • Capacity to achieve skill level in new technologies in a few months
  • Basic knowledge or willingness to train on LOPA (Layer of Protection Analysis)
  • Adherence to the site MOC (Management of Change) process and safety requirements
  • Perform and support required testing and documentation for process and SIS interlocks
Skills / Qualifications

Skills / Qualifications:

  • Engineering degree from an accredited university preferred, Chemical Engineering preferred
  • At least five (5) years' experience in implementation and testing of DCS configuration. Prefer eight (8) years or more experience
  • Experience with DCS batch configuration and understanding of ISA-S88 standard preferred
  • Familiarity with applicable codes, standards and practices
  • Alarm rationalization experience preferred
  • Familiarity with hardware associated with control systems
  • Chemical manufacturing, refining, or pharmaceutical/life sciences industry experience preferred
  • Familiarity with SIS systems preferred
  • Hands on experience with control systems required, DeltaV highly preferred
  • Must work well in a team environment with all levels of employees
  • Demonstrated capacity to gain skill level in new technologies in a few months
  • Working knowledge and ability to troubleshoot industry communication protocols
  • Ability to read, understand, and red-line P&ID's and loop drawings
Company Overview

Wood is a global leader in engineering and consultancy across energy and the built environment, helping to unlock solutions to some of the world's most critical challenges. We provide consulting, projects and operations solutions in more than 60 countries, employing around 40,000 people. www.woodplc.com

Diversity Statement

We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.

Employment Type: OTHER

Apply