1

Construction Flagger Jobs in Decatur, GA (NOW HIRING)

Flagger

Conyers, GA · On-site

$13.25 - $17.50/hr

A road construction flagger is responsible for directing vehicles and pedestrians safely through or around work zones, protecting both the crew and the public by controlling traffic flow with signs ...

Flagger

Conyers, GA · On-site

$13.25 - $17.50/hr

A road construction flagger is responsible for directing vehicles and pedestrians safely through or around work zones, protecting both the crew and the public by controlling traffic flow with signs ...

Traffic Control Flagger

Atlanta, GA · On-site

$16.50 - $19.30/hr

Overview Traffic Control Flagger Pay: $16.50-19.30/hr Advancement: Opportunity for raise/promotion in 30-90 days! Promotional Bonus: Additional $500 Promotional Bonus! * Advancement Opportunities:

Traffic Control Flagger Pay: $16.50-19.30/hr Advancement: Opportunity for raise/promotion in 30-90 days! Promotional Bonus: Additional $500 Promotional Bonus! * Advancement Opportunities: Become a ...

Traffic Control Flagger

Atlanta, GA · On-site

$16.50 - $19.30/hr

Overview Traffic Control Flagger Pay: $16.50-19.30/hr Advancement: Opportunity for raise/promotion in 30-90 days! Promotional Bonus: Additional $500 Promotional Bonus! * Advancement Opportunities:

Flagger I

Lithia Springs, GA · On-site

$13.75 - $18.50/hr

Perform general construction work under direction of Foreman or Supervisor as needed * Drive safely ... Previous flagging experience, preferred Physical abilities & exposures * Routinely : work alone in ...

We are proud to offer weekly pay to our Traffic Flaggers with a starting rate of $15.00/hour as well as a bonus if you are already flagger certified or ex-military IF YOU: · Like working outside · ...

Construction Laborer

Atlanta, GA

$17.50 - $22.25/hr

May clean and prepare sites, flagging traffic, dig trenches, set braces to support sides of ... Requires six months of previous construction experience. Must lift/carry 70 lbs., when necessary.

Senior Superintendent - Aviation Construction Location: Atlanta, Georgia (Onsite) Job Type ... Knowledge of crane flagging and rigging (Advanced). * Ability to understand document changes and ...

New

Flagger

Atlanta, GA

$14.50 - $19.25/hr

* Setup, maintain, and remove temporary work zones including warning signs, traffic cones, stop slow paddles, and rumble strips. * Communicate to ensure that automobiles and pedestrians do not ...

Construction Laborer

Marietta, GA

$16.25 - $20.75/hr

Control traffic passing near, in, or around work zones (roadway flagging). * Load, unload, or ... A minimum of 6 months of construction labor work experience or a certificate from a training ...

Construction Laborer

Marietta, GA · On-site

$16.75 - $21.50/hr

Control traffic passing near, in, or around work zones (roadway flagging). * Load, unload, or ... A minimum of 6 months of construction labor work experience or a certificate from a training ...

Construction Laborer

Marietta, GA

$16.25 - $20.75/hr

Control traffic passing near, in, or around work zones (roadway flagging). * Load, unload, or ... A minimum of 6 months of construction labor work experience or a certificate from a training ...

Equipment Operator

Atlanta, GA

$18 - $24.75/hr

Juneau Construction Company is seeking qualified Equipment Operators to join our Southeast team ... rigging and flagging for cranes when needed * Assist Carpenters and Laborers when equipment ...

next page

Showing results 1-20

Construction Flagger information

See Decatur, GA salary details

$9

$21

$31

How much do construction flagger jobs pay per hour?

As of Jul 6, 2026, the average hourly pay for construction flagger in Decatur, GA is $21.24, according to ZipRecruiter salary data. Most workers in this role earn between $16.88 and $25.34 per hour, depending on experience, location, and employer.

What jobs pay 4000 a week without a degree?

Construction flaggers typically do not earn $4,000 per week; however, some high-paying trades like specialized union electricians, heavy equipment operators, or certain oil and gas industry roles can reach or exceed that level with experience and certifications. These jobs often require technical skills, on-the-job training, or licensing but not necessarily a college degree.

What are construction flaggers?

Construction flaggers are workers responsible for directing traffic safely through or around construction zones, roadwork sites, or other locations with temporary traffic changes. They use signs, signals, and hand gestures to communicate with drivers and ensure the safety of both the construction crew and the public. Flaggers must remain alert, follow safety protocols, and often undergo specialized training to handle different traffic situations. Their role is crucial for preventing accidents and maintaining an efficient flow of vehicles in work zones.

What is the difference between Construction Flagger vs Construction Laborer?

AspectConstruction FlaggerConstruction Laborer
CertificationsTraffic Control Certification often requiredOSHA 10 or 30-hour training typically required
Work EnvironmentTraffic sites, roadways, construction zonesVarious construction sites, including buildings and infrastructure
Job DutiesDirecting traffic, ensuring safety at roadwork sitesGeneral labor tasks like digging, lifting, material handling
Industry UsageHigh in road construction and maintenanceBroad, including road, building, and infrastructure projects

Construction flaggers primarily focus on directing traffic and ensuring safety in roadway construction zones, often requiring traffic control certifications. Construction laborers perform a variety of physical tasks across different construction sites, with less emphasis on traffic management. Both roles are essential in construction projects but differ in responsibilities and work environments.

What Is a Construction Flagger?

A Construction Flagger helps control traffic through construction sites and in roadway work zones. The primary responsibilities of a Construction Flagger are to communicate with drivers and teammates to ensure traffic safety through construction work zones. To maintain zone safety, Construction Flaggers place traffic cones to shut down lanes, use signs, flags, and hand signals to communicate with drivers, and record license plate numbers of disobedient drivers and report them to police.

What are some common challenges faced by Construction Flaggers on the job, and how can they be managed?

Construction Flaggers often face challenges such as working in varying weather conditions, managing impatient or distracted drivers, and maintaining focus during long shifts. Staying alert and maintaining clear communication with your team are essential to ensure everyone's safety. Many flaggers find it helpful to rotate tasks when possible and take scheduled breaks to prevent fatigue. Wearing high-visibility clothing and using standardized hand signals or devices also help minimize risks and misunderstandings on site.

What are the key skills and qualifications needed to thrive as a Construction Flagger, and why are they important?

To thrive as a Construction Flagger, you need a solid understanding of traffic control procedures, safety regulations, and typically a flagger certification from an accredited provider. Familiarity with two-way radios, stop/slow paddles, and personal protective equipment (PPE) is essential. Strong communication, alertness, and the ability to remain calm under pressure are important soft skills for effectively directing traffic and ensuring crew safety. These skills are crucial for maintaining work zone safety, preventing accidents, and keeping construction projects running smoothly.

Where do flaggers get paid the most?

Construction flaggers tend to earn higher wages in regions with a high cost of living or strong construction industries, such as certain metropolitan areas or states with active infrastructure projects. Factors like experience, certifications, and working hours can also influence pay rates, with overtime often increasing earnings.

Is being a flagger worth it?

Construction flaggers play a vital role in ensuring safety and directing traffic at construction sites. The job typically offers part-time or seasonal work, with pay rates varying by region, and requires training and safety certifications. While it can be physically demanding and involve working outdoors in various weather conditions, it provides an entry-level opportunity in the construction industry.

How do I get a job as a flagger?

To become a construction flagger, you typically need to complete a flagger training course and obtain a certification, which is often required by employers and state regulations. Having good communication skills, attention to safety, and the ability to work outdoors in various weather conditions are important. Some positions may also require a valid driver's license and the ability to stand for long periods.
What are the most commonly searched types of Construction Flagger jobs in Decatur, GA? The most popular types of Construction Flagger jobs in Decatur, GA are:
What are popular job titles related to Construction Flagger jobs in Decatur, GA? For Construction Flagger jobs in Decatur, GA, the most frequently searched job titles are:
What cities near Decatur, GA are hiring for Construction Flagger jobs? Cities near Decatur, GA with the most Construction Flagger job openings:
Flagger

$13.25 - $17.50/hr

Full-time

Posted 6 days ago


Job description

A road construction flagger is responsible for directing vehicles and pedestrians safely through or around work zones, protecting both the crew and the public by controlling traffic flow with signs, paddles, and hand signals. The role involves constant situational awareness, clear communication, and adherence to traffic control standards and safety regulations.
Core duties
  • Direct traffic using stop/slow paddles, flags, or illuminated wands to guide vehicles and pedestrians through work zones safely.
  • Coordinate with fellow flaggers and supervisors via radios or hand signals to alternate traffic in single-lane closures and align with ongoing site operations.
  • Set up, monitor, and remove traffic control devices, including cones, barricades, warning signs, and message boards, ensuring visibility and compliance with standards.
  • Inform motorists about detours, lane shifts, and expected delays; answer basic questions courteously and concisely.
  • Monitor traffic behavior for hazards (speeding, confusion, near-misses) and adjust control patterns or notify the crew as needed.
  • Maintain work zone safety by staying alert to moving equipment, changing conditions, and emergency needs; assist emergency vehicles through the zone.
  • Document and report negligent or noncompliant drivers (e.g., recording license plates) to supervisors and, when required, law enforcement.
  • Assist crews with site safety tasks such as clearing debris that impacts traffic control, when appropriate and safe.
Skills and requirements
  • Strong communication and nonverbal signaling; ability to give clear, decisive directions under pressure.
  • High attention to detail, vigilance, and situational awareness in dynamic, high-risk environments.
  • Physical stamina to stand for long periods and work outdoors in all weather conditions, including heat, cold, and low light.
  • Knowledge of traffic laws, work zone standards, and the proper placement/use of signs, cones, and barriers.
  • Teamwork and coordination with supervisors, equipment operators, and other flaggers.
  • Reliability, professionalism, and the ability to remain calm and courteous with the public.
Typical qualifications
  • High school diploma or GED.
  • Valid driver's license.
  • Work zone flagger certification as required by state or employer (e.g., ATSSA or state-approved training); refresher training at specified intervals.
  • Familiarity with the MUTCD and applicable state DOT work zone guidelines.
  • Prior construction or traffic control experience preferred but often not required; employers may provide on-the-job training.
Working conditions
  • Outdoor, roadside environments with exposure to weather, noise, dust, and moving traffic.
  • Extended shifts, possible nights, weekends, and variable schedules based on project needs.
  • Use of required PPE: high-visibility apparel (ANSI/ISEA-compliant), hard hat, safety footwear, and, as needed, eye/ear protection and gloves.
Success indicators
  • Zero-incident traffic control with smooth vehicle flow and minimal delays.
  • Proper, compliant setup and maintenance of traffic control devices throughout the shift.
  • Effective coordination with site activities and rapid, appropriate response to changing conditions or emergencies.
  • Accurate documentation and clear reporting of incidents and hazards.

• Professional Attitude & conduct
• Multi-task, interpersonal communication, problem solving, and time management skills are needed.
• High degree of safety awareness and safety discipline
• Display a professional and courteous attitude to co-workers, supervisors and the general public at all times.
• Willing to travel and work away from home when and if required.
• Be willing to work nights and weekends when necessary.
• Strictly adhere to safety requirements and the policies and procedures as outlined in the Employee Handbook.
• Have the willingness to work in a team environment and assist co-workers or supervisors with other duties as required.
• Wear personal protective equipment (PPE) in designated operations and production areas as stated by Pittman Construction Safety and OSHA.
• Be at least age 18 years of age due to nature of working environment.
• You will be expected to be flexible to the needs of our business, as we continually strive to meet and exceed the needs of our customers.
• Random and Suspicion Drug tests are performed
• Please be aware that you must successfully complete a drug screen and background check in order to be hired into the Pittman Construction.
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Pittman Construction is an Equal Opportunity Employer who strives to provide an inclusive work environment that involves everyone and embraces the diverse talent of its people.
Equal Opportunity Employer/Minorities/Females/Disabled/Veterans
Where required by state law and/or city ordinance; this employer will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization.
The ability to work a full shift, come to work on time, work overtime as needed and the ability to work according to the necessary schedule to meet job requirements with or without reasonable accommodation is an essential function of this position